Template Properties

An important part of effectively managing your network infrastucture is having access to accurate, up-to-date, and specific information about the condition of systems and servers. You use SiteScope alerts to send notification of system faults and errors when they are detected.

This chapter describes:

About Template Properties
Common Properties
E-mail Report Properties
Monitor Specific Properties

About Template Properties

top

Each SiteScope monitor instance has a number of property values that are set each time the monitor is run.

These are the property names that are be available for use in SiteScope alert and report templates. You can use these properties to customize the content of e-mail messages that are sent when a monitor alert is generated. These parameters are also used to pass values between monitors that are part of an eBusiness Transaction Monitor

Properties that begin with an underscore character are monitor configuration properties. These properties are set within SiteScope on the applicable monitor definition forms. The other properties listed are the results of the monitor running. Note that some of the properties, such as lastMeasurementTime, are internal properties and not generally interesting for alerts or reports.

Common Properties

top

The following properties are applicable to all monitor types:

General Template Properties


name	description
`name`	name of the monitor (same as _name)
`state`	the status string reported by the monitor (same as stateString)
`category`	the threshold status of the monitor (for example, good, error, warning)
`group`	the name of the group that the monitor is in
`currentTime`	the time that the alert is run
`time`	the time that the monitor completed
`time-time`	the time portion of the time that the monitor completed
`time-date`	the date portion of the time that the monitor completed
`s\|$year$/$month$/$day$\|`	a substitution expression - in this case year, month, day
`group.propertyname`	a given property of the group that the monitor is in
`group.parent.propertyname`	a given property of the parent group of the group that the monitor is in
`s\|$year$/$month$/$day$\|`	a substitution expression - in this case year, month, day
`sitescopeurl`	the URL to the main page of SiteScope for admin access
`sitescopeuserurl`	the URL to the main page of SiteScope for user access
`mainParameters`	all of the parameters that appear on the Edit form
`mainStateProperties`	all of the result stats shown on the Reports
`secondaryParameters`	all of the internal parameters
`secondaryStateProperties`	all of the internal result stats
`all`	all of the properties of the monitor

E-mail Report Properties

top

The following properties are applicable to the email templates stored in the templates.history directory:

Report Email Template Properties


name	description
`reportPeriod`	The time period for this report
`summary`	Summary and measurement information
`basicAlertSummary`	Basic information on what alerts have been triggered
`detailAlertSummary`	More detailed information on alerts
`_webserverAddress`	The IP address for the SiteScope Server
`_httpPort`	The port number used to access SiteScope
`reportURL`	The URL to the HTML version of the management report
`reportIndexURL`	The URL to the index page for the management report
`textReportURL`	The URL to the comma-delimited file generated by the management report
`xmlReportURL`	The URL to the XML file generated by the management report
`userReportURL`	The URL to the user-accessible verion of the report
`userReportIndexURL`	The URL to the index page for a user-accessible report
`userTextReportURL`	The URL to the comma-delimited file generated by a user-accessible report
`userXMLReportURL`	The URL to the XML file generated by a user-accessible report

Monitor Specific Properties

top

The following is an index of the template properties specific for the different monitor types:

Index of Monitor Template Properties


ApacheMonitor	ASPMonitor
BandwidthMonitor	BrowsableNTCounterMonitor
BrowsableSNMPMonitor	BV55Monitor
CheckPointMonitor	CiscoMonitor
CitrixMonitor	ColdFusionMonitor
CompositeMonitor	CPUMonitor
DatabaseMonitor	DB2Monitor
DHCPMonitor	DirectoryMonitor
DiskSpaceMonitor	DNSMonitor
DynamoMonitor	EBusinessTransactionMonitor
F5Monitor	FileMonitor
FTPMonitor	HealthServerLoadMonitor
HealthUnixServerMonitor	HistoryHealthMonitor
IISServerMonitor	LDAPMonitor
LinkMonitor	LogEventHealthMonitor
LogMonitor	MailMonitor
MAPIMonitor	MasterHealthMonitor
MemoryMonitor	MGHealthMonitor
MonitorLoadMonitor	NetscapeMonitor
NetworkBandwidthMonitor	NetworkMonitor
NewsMonitor	NTCounterMonitor
NTDialupMonitor	NTEventLogMonitor
Oracle9iMonitor	OracleJDBCMonitor
PDHMonitor	PingMonitor
PortMonitor	RadiusMonitor
RealMediaPlayerMonitor	RealMonitor
RTSPMonitor	SAPMonitor
SAPPortalMonitor	ScriptMonitor
ServiceMonitor	SilverStreamMonitor
SNMPMonitor	SNMPTrapMonitor
SQLServerMonitor	SunOneMonitor
SybaseMonitor	TuxedoMonitor
URLContentMonitor	URLListMonitor
URLMonitor	URLOriginalMonitor
URLSequenceMonitor	WebLogic5xMonitor
WebLogic6xMonitor	WebServerMonitor
WebServiceMonitor	WebSphereMonitor
WebSphereServletMonitor	WindowsMediaMonitor
WindowsMediaPlayerMonitor	SampleDirectoryMonitor
SampleFileMonitor	SampleScriptMonitor
TemplateMultiParameterMonitor

Monitor Type: Apache Server


name	label	description
`status`	status	most recent status of the monitor
`value0`	Counter 1 Value	value of the indicated counter
`value1`	Counter 2 Value	value of the indicated counter
`value2`	Counter 3 Value	value of the indicated counter
`value3`	Counter 4 Value	value of the indicated counter
`value4`	Counter 5 Value	value of the indicated counter
`value5`	Counter 6 Value	value of the indicated counter
`value6`	Counter 7 Value	value of the indicated counter
`value7`	Counter 8 Value	value of the indicated counter
`value8`	Counter 9 Value	value of the indicated counter
`value9`	Counter 10 Value	value of the indicated counter
`_counters`	Counters	the current selection of counterschoose counters
`_url`	URL	the server administration URL (example: http://server:port/server-status?auto)
`_frequency`	Update every	amount of time between checks of a monitor
`_name`	Title	title that should appear in the Monitor table (optional)
`_disabled`	Disable	temporarily disable monitor sampling and alerting
`_timeout`	Timeout	the time out, in seconds, to wait for the response
`_OS`	Server OS	optional Operating System of server, default is Unix
`_proxy`	HTTP Proxy	optional proxy server to use including port (example: proxy.sitescope.com:8080)
`_username`	Authorization User Name	optional user name if the URL requires authorization
`_password`	Authorization Password	optional password if the URL requires authorization
`_challengeResponse`	NT Challenge Response	when selected, use NT Challenge Response authorization
`_proxyusername`	Proxy Server User Name	optional user name if the proxy server requires authorization
`_proxypassword`	Proxy Server Password	optional password if the proxy server requires authorization
`_verifyError`	Verify Error	if the monitor detects an error, immediately perform the check again to verify the error.
`_errorFrequency`	Update every (on errors)	the amount of time between checks whenever the status of the monitor is not ok; the Update value from above is used if this is left blank
`_notLogToTopaz`	Stop Logging To Mercury Application Management	Check this box to not log the data for this monitor to Mercury Application Management
`_schedule`	Schedule	schedule for the monitor to be enabled - for example, "weekdays, 9-6" enables the monitor to run from 9am to 6pm, Monday - Friday
`_onlyStatusChanges`	_onlyStatusChanges	state of the indicated configuration option
`_monitorDescription`	Monitor Description	additional description of monitor that appears on Monitor Detail page (optional)
`_logOnlyThresholdMeas`	_logOnlyThresholdMeas	state of the indicated configuration option
`_description`	Report Description	additional description of monitor that appears on Reports and in monitor popup info (optional)
`_logOnlyMonitorData`	_logOnlyMonitorData	state of the indicated configuration option
`__template`	Monitor Template	monitor template to use for this monitor
`_dependsOn`	Depends On	Choose the monitor that this monitor depends on
`_dependsCondition`	Depends Condition	If OK, this monitor is only enabled if the Depends On monitor is OK.

Monitor Type: ASP Server


name	label	description
`value0`	Counter 1 Value	value of the indicated counter
`value1`	Counter 2 Value	value of the indicated counter
`value2`	Counter 3 Value	value of the indicated counter
`value3`	Counter 4 Value	value of the indicated counter
`value4`	Counter 5 Value	value of the indicated counter
`value5`	Counter 6 Value	value of the indicated counter
`value6`	Counter 7 Value	value of the indicated counter
`value7`	Counter 8 Value	value of the indicated counter
`value8`	Counter 9 Value	value of the indicated counter
`value9`	Counter 10 Value	value of the indicated counter
`value10`	Counter 11 Value	value of the indicated counter
`value11`	Counter 12 Value	value of the indicated counter
`value12`	Counter 13 Value	value of the indicated counter
`value13`	Counter 14 Value	value of the indicated counter
`value14`	Counter 15 Value	value of the indicated counter
`value15`	Counter 16 Value	value of the indicated counter
`value16`	Counter 17 Value	value of the indicated counter
`value17`	Counter 18 Value	value of the indicated counter
`value18`	Counter 19 Value	value of the indicated counter
`value19`	Counter 20 Value	value of the indicated counter
`_counters`	Counters	the current selection of counterschoose counters
`remoteMachineName`	Remote Server	use this field instead of `_machine`, if you need the name of the remote machine to appear in the template
`_frequency`	Update every	amount of time between checks of a monitor
`_name`	Title	title that should appear in the Monitor table (optional)
`_disabled`	Disable	temporarily disable monitor sampling and alerting
`_verifyError`	Verify Error	if the monitor detects an error, immediately perform the check again to verify the error.
`_errorFrequency`	Update every (on errors)	the amount of time between checks whenever the status of the monitor is not ok; the Update value from above is used if this is left blank
`_notLogToTopaz`	Stop Logging To Mercury Application Management	Check this box to not log the data for this monitor to Mercury Application Management
`_schedule`	Schedule	schedule for the monitor to be enabled - for example, "weekdays, 9-6" enables the monitor to run from 9am to 6pm, Monday - Friday
`_onlyStatusChanges`	_onlyStatusChanges	state of the indicated configuration option
`_monitorDescription`	Monitor Description	additional description of monitor that appears on Monitor Detail page (optional)
`_description`	Report Description	additional description of monitor that appears on Reports and in monitor popup info (optional)
`_logOnlyThresholdMeas`	_logOnlyThresholdMeas	state of the indicated configuration option
`_logOnlyMonitorData`	_logOnlyMonitorData	state of the indicated configuration option
`__template`	Monitor Template	monitor template to use for this monitor
`_dependsOn`	Depends On	Choose the monitor that this monitor depends on
`_dependsCondition`	Depends Condition	If OK, this monitor is only enabled if the Depends On monitor is OK.

Monitor Type: Formula Composite


name	label	description
`status`	status	most recent status of the monitor
`result`	Result	most recent Result reported
`_item`	Items	Select two SNMP, Script, or Database monitors to be checked and their results calculated.
`_opertaion`	Operation	Select the operation to be performed on the results of the above monitors.
`_frequency`	Update every	amount of time between checks of a monitor
`_name`	Title	title that should appear in the Monitor table (optional)
`_disabled`	Disable	temporarily disable monitor sampling and alerting
`_checkSequentially`	Run Monitors	Run each monitor before performing calculation.
`_delay`	Monitor Delay	If running each monitor, delay in seconds between monitor runs.
`_static`	Constant	Operate a constant on the Operation result. For example entering *8 will multiply the Operation result by 8.
`_valeLabels`	Result Label	Optional label for the result of the formula calculation.
`_verifyError`	Verify Error	if the monitor detects an error, immediately perform the check again to verify the error.
`_errorFrequency`	Update every (on errors)	the amount of time between checks whenever the status of the monitor is not ok; the Update value from above is used if this is left blank
`_notLogToTopaz`	Stop Logging To Mercury Application Management	Check this box to not log the data for this monitor to Mercury Application Management
`_schedule`	Schedule	schedule for the monitor to be enabled - for example, "weekdays, 9-6" enables the monitor to run from 9am to 6pm, Monday - Friday
`_onlyStatusChanges`	_onlyStatusChanges	state of the indicated configuration option
`_monitorDescription`	Monitor Description	additional description of monitor that appears on Monitor Detail page (optional)
`_logOnlyThresholdMeas`	_logOnlyThresholdMeas	state of the indicated configuration option
`_description`	Report Description	additional description of monitor that appears on Reports and in monitor popup info (optional)
`_logOnlyMonitorData`	_logOnlyMonitorData	state of the indicated configuration option
`__template`	Monitor Template	monitor template to use for this monitor
`_dependsOn`	Depends On	Choose the monitor that this monitor depends on
`_dependsCondition`	Depends Condition	If OK, this monitor is only enabled if the Depends On monitor is OK.

Monitor Type: Browsable Windows Performance Counters


name	label	description
`lastMeasurementTime`	lastMeasurementTime	value of the indicated measurement
`lastMeasurement0`	lastMeasurement0	value of the indicated measurement
`lastMeasurement1`	lastMeasurement1	value of the indicated measurement
`lastMeasurement2`	lastMeasurement2	value of the indicated measurement
`lastMeasurement3`	lastMeasurement3	value of the indicated measurement
`lastMeasurement4`	lastMeasurement4	value of the indicated measurement
`lastMeasurement5`	lastMeasurement5	value of the indicated measurement
`lastMeasurement6`	lastMeasurement6	value of the indicated measurement
`lastMeasurement7`	lastMeasurement7	value of the indicated measurement
`lastMeasurement8`	lastMeasurement8	value of the indicated measurement
`lastMeasurement9`	lastMeasurement9	value of the indicated measurement
`browsableValue1`	browsableValue1	value of the indicated measurement
`measurement10`	measurement10	value of the indicated measurement
`measurement11`	measurement11	value of the indicated measurement
`measurement12`	measurement12	value of the indicated measurement
`measurement13`	measurement13	value of the indicated measurement
`measurement14`	measurement14	value of the indicated measurement
`measurement15`	measurement15	value of the indicated measurement
`measurement16`	measurement16	value of the indicated measurement
`measurement17`	measurement17	value of the indicated measurement
`measurement18`	measurement18	value of the indicated measurement
`measurement19`	measurement19	value of the indicated measurement
`value0`	value0	value of the indicated measurement
`value1`	value1	value of the indicated measurement
`value2`	value2	value of the indicated measurement
`value3`	value3	value of the indicated measurement
`value4`	value4	value of the indicated measurement
`measurement20`	measurement20	value of the indicated measurement
`value5`	value5	value of the indicated measurement
`measurement21`	measurement21	value of the indicated measurement
`value6`	value6	value of the indicated measurement
`measurement22`	measurement22	value of the indicated measurement
`value7`	value7	value of the indicated measurement
`measurement23`	measurement23	value of the indicated measurement
`value8`	value8	value of the indicated measurement
`measurement24`	measurement24	value of the indicated measurement
`value9`	value9	value of the indicated measurement
`measurement25`	measurement25	value of the indicated measurement
`measurement26`	measurement26	value of the indicated measurement
`measurement27`	measurement27	value of the indicated measurement
`measurement28`	measurement28	value of the indicated measurement
`measurement29`	measurement29	value of the indicated measurement
`measurement30`	measurement30	value of the indicated measurement
`measurement31`	measurement31	value of the indicated measurement
`measurement32`	measurement32	value of the indicated measurement
`measurement33`	measurement33	value of the indicated measurement
`measurement34`	measurement34	value of the indicated measurement
`measurement35`	measurement35	value of the indicated measurement
`measurement36`	measurement36	value of the indicated measurement
`measurement37`	measurement37	value of the indicated measurement
`measurement38`	measurement38	value of the indicated measurement
`measurement39`	measurement39	value of the indicated measurement
`measurement0`	measurement0	value of the indicated measurement
`measurement1`	measurement1	value of the indicated measurement
`measurement2`	measurement2	value of the indicated measurement
`measurement3`	measurement3	value of the indicated measurement
`measurement4`	measurement4	value of the indicated measurement
`measurement5`	measurement5	value of the indicated measurement
`measurement6`	measurement6	value of the indicated measurement
`measurement7`	measurement7	value of the indicated measurement
`measurement8`	measurement8	value of the indicated measurement
`measurement9`	measurement9	value of the indicated measurement
`lastMeasurement10`	lastMeasurement10	value of the indicated measurement
`lastMeasurement11`	lastMeasurement11	value of the indicated measurement
`lastMeasurement12`	lastMeasurement12	value of the indicated measurement
`lastMeasurement13`	lastMeasurement13	value of the indicated measurement
`lastMeasurement14`	lastMeasurement14	value of the indicated measurement
`lastMeasurement15`	lastMeasurement15	value of the indicated measurement
`lastMeasurement16`	lastMeasurement16	value of the indicated measurement
`lastMeasurement17`	lastMeasurement17	value of the indicated measurement
`lastMeasurement18`	lastMeasurement18	value of the indicated measurement
`lastMeasurement19`	lastMeasurement19	value of the indicated measurement
`lastMeasurement20`	lastMeasurement20	value of the indicated measurement
`lastMeasurement21`	lastMeasurement21	value of the indicated measurement
`lastMeasurement22`	lastMeasurement22	value of the indicated measurement
`lastMeasurement23`	lastMeasurement23	value of the indicated measurement
`lastMeasurement24`	lastMeasurement24	value of the indicated measurement
`lastMeasurement25`	lastMeasurement25	value of the indicated measurement
`lastMeasurement26`	lastMeasurement26	value of the indicated measurement
`lastMeasurement27`	lastMeasurement27	value of the indicated measurement
`lastMeasurement28`	lastMeasurement28	value of the indicated measurement
`lastMeasurement29`	lastMeasurement29	value of the indicated measurement
`lastMeasurementWasNotAvailable`	lastMeasurementWasNotAvailable	value of the indicated measurement
`lastMeasurement30`	lastMeasurement30	value of the indicated measurement
`lastMeasurement31`	lastMeasurement31	value of the indicated measurement
`lastMeasurement32`	lastMeasurement32	value of the indicated measurement
`lastMeasurement33`	lastMeasurement33	value of the indicated measurement
`lastMeasurement34`	lastMeasurement34	value of the indicated measurement
`lastMeasurement35`	lastMeasurement35	value of the indicated measurement
`lastMeasurement36`	lastMeasurement36	value of the indicated measurement
`lastMeasurement37`	lastMeasurement37	value of the indicated measurement
`lastMeasurement38`	lastMeasurement38	value of the indicated measurement
`lastMeasurement39`	lastMeasurement39	value of the indicated measurement
`value10`	value10	value of the indicated measurement
`value11`	value11	value of the indicated measurement
`lastBaseMeasurement10`	lastBaseMeasurement10	value of the indicated measurement
`lastBaseMeasurement0`	lastBaseMeasurement0	value of the indicated measurement
`value12`	value12	value of the indicated measurement
`lastBaseMeasurement11`	lastBaseMeasurement11	value of the indicated measurement
`lastBaseMeasurement1`	lastBaseMeasurement1	value of the indicated measurement
`value13`	value13	value of the indicated measurement
`lastBaseMeasurement12`	lastBaseMeasurement12	value of the indicated measurement
`lastBaseMeasurement2`	lastBaseMeasurement2	value of the indicated measurement
`value14`	value14	value of the indicated measurement
`lastBaseMeasurement13`	lastBaseMeasurement13	value of the indicated measurement
`lastBaseMeasurement3`	lastBaseMeasurement3	value of the indicated measurement
`value15`	value15	value of the indicated measurement
`lastBaseMeasurement14`	lastBaseMeasurement14	value of the indicated measurement
`lastBaseMeasurement4`	lastBaseMeasurement4	value of the indicated measurement
`value16`	value16	value of the indicated measurement
`lastBaseMeasurement15`	lastBaseMeasurement15	value of the indicated measurement
`lastBaseMeasurement5`	lastBaseMeasurement5	value of the indicated measurement
`value17`	value17	value of the indicated measurement
`lastBaseMeasurement16`	lastBaseMeasurement16	value of the indicated measurement
`lastBaseMeasurement6`	lastBaseMeasurement6	value of the indicated measurement
`value18`	value18	value of the indicated measurement
`lastBaseMeasurement17`	lastBaseMeasurement17	value of the indicated measurement
`lastBaseMeasurement7`	lastBaseMeasurement7	value of the indicated measurement
`value19`	value19	value of the indicated measurement
`lastBaseMeasurement18`	lastBaseMeasurement18	value of the indicated measurement
`lastBaseMeasurement8`	lastBaseMeasurement8	value of the indicated measurement
`lastBaseMeasurement19`	lastBaseMeasurement19	value of the indicated measurement
`lastBaseMeasurement9`	lastBaseMeasurement9	value of the indicated measurement
`value20`	value20	value of the indicated measurement
`value21`	value21	value of the indicated measurement
`lastBaseMeasurement20`	lastBaseMeasurement20	value of the indicated measurement
`value22`	value22	value of the indicated measurement
`lastBaseMeasurement21`	lastBaseMeasurement21	value of the indicated measurement
`value23`	value23	value of the indicated measurement
`lastBaseMeasurement22`	lastBaseMeasurement22	value of the indicated measurement
`value24`	value24	value of the indicated measurement
`lastBaseMeasurement23`	lastBaseMeasurement23	value of the indicated measurement
`value25`	value25	value of the indicated measurement
`lastBaseMeasurement24`	lastBaseMeasurement24	value of the indicated measurement
`value26`	value26	value of the indicated measurement
`lastBaseMeasurement25`	lastBaseMeasurement25	value of the indicated measurement
`value27`	value27	value of the indicated measurement
`lastBaseMeasurement26`	lastBaseMeasurement26	value of the indicated measurement
`value28`	value28	value of the indicated measurement
`lastBaseMeasurement27`	lastBaseMeasurement27	value of the indicated measurement
`value29`	value29	value of the indicated measurement
`lastBaseMeasurement28`	lastBaseMeasurement28	value of the indicated measurement
`lastBaseMeasurement29`	lastBaseMeasurement29	value of the indicated measurement
`value30`	value30	value of the indicated measurement
`value31`	value31	value of the indicated measurement
`lastBaseMeasurement30`	lastBaseMeasurement30	value of the indicated measurement
`value32`	value32	value of the indicated measurement
`lastBaseMeasurement31`	lastBaseMeasurement31	value of the indicated measurement
`value33`	value33	value of the indicated measurement
`lastBaseMeasurement32`	lastBaseMeasurement32	value of the indicated measurement
`value34`	value34	value of the indicated measurement
`lastBaseMeasurement33`	lastBaseMeasurement33	value of the indicated measurement
`value35`	value35	value of the indicated measurement
`lastBaseMeasurement34`	lastBaseMeasurement34	value of the indicated measurement
`value36`	value36	value of the indicated measurement
`lastBaseMeasurement35`	lastBaseMeasurement35	value of the indicated measurement
`value37`	value37	value of the indicated measurement
`lastBaseMeasurement36`	lastBaseMeasurement36	value of the indicated measurement
`value38`	value38	value of the indicated measurement
`lastBaseMeasurement37`	lastBaseMeasurement37	value of the indicated measurement
`value39`	value39	value of the indicated measurement
`lastBaseMeasurement38`	lastBaseMeasurement38	value of the indicated measurement
`lastBaseMeasurement39`	lastBaseMeasurement39	value of the indicated measurement
`lastMeasurementTicks`	lastMeasurementTicks	value of the indicated measurement
`browsableValue2`	browsableValue2	value of the indicated browsable counter
`browsableValue3`	browsableValue3	value of the indicated browsable counter
`browsableValue4`	browsableValue4	value of the indicated browsable counter
`browsableValue5`	browsableValue5	value of the indicated browsable counter
`browsableValue6`	browsableValue6	value of the indicated browsable counter
`browsableValue7`	browsableValue7	value of the indicated browsable counter
`browsableValue8`	browsableValue8	value of the indicated browsable counter
`browsableValue9`	browsableValue9	value of the indicated browsable counter
`browsableValue10`	browsableValue10	value of the indicated browsable counter
`browsableValue11`	browsableValue11	value of the indicated browsable counter
`browsableValue12`	browsableValue12	value of the indicated browsable counter
`browsableValue13`	browsableValue13	value of the indicated browsable counter
`browsableValue14`	browsableValue14	value of the indicated browsable counter
`browsableValue15`	browsableValue15	value of the indicated browsable counter
`browsableValue16`	browsableValue16	value of the indicated browsable counter
`browsableValue17`	browsableValue17	value of the indicated browsable counter
`browsableValue18`	browsableValue18	value of the indicated browsable counter
`browsableValue19`	browsableValue19	value of the indicated browsable counter
`browsableValue20`	browsableValue20	value of the indicated browsable counter
`browsableValue21`	browsableValue21	value of the indicated browsable counter
`browsableValue22`	browsableValue22	value of the indicated browsable counter
`browsableValue23`	browsableValue23	value of the indicated browsable counter
`browsableValue24`	browsableValue24	value of the indicated browsable counter
`browsableValue25`	browsableValue25	value of the indicated browsable counter
`browsableValue26`	browsableValue26	value of the indicated browsable counter
`browsableValue27`	browsableValue27	value of the indicated browsable counter
`browsableValue28`	browsableValue28	value of the indicated browsable counter
`browsableValue29`	browsableValue29	value of the indicated browsable counter
`browsableValue30`	browsableValue30	value of the indicated browsable counter
`browsableValue31`	browsableValue31	value of the indicated browsable counter
`browsableValue32`	browsableValue32	value of the indicated browsable counter
`browsableValue33`	browsableValue33	value of the indicated browsable counter
`browsableValue34`	browsableValue34	value of the indicated browsable counter
`browsableValue35`	browsableValue35	value of the indicated browsable counter
`browsableValue36`	browsableValue36	value of the indicated browsable counter
`browsableValue37`	browsableValue37	value of the indicated browsable counter
`browsableValue38`	browsableValue38	value of the indicated browsable counter
`browsableValue39`	browsableValue39	value of the indicated browsable counter
`browsableValue40`	browsableValue40	value of the indicated browsable counter
`_server`	Server
`_xmlfile`	Counter File	a Performance Monitor setting file that specifies the counters (from templates.perfmon\browsable directory)
`_browseNameid1`	_browseNameid1	ID number assigned to the indicated browsable counter number
`_browseName1`	_browseName1	ID number assigned to the indicated browsable counter number
`_browseNameid2`	_browseNameid2	ID number assigned to the indicated browsable counter number
`_browseName2`	_browseName2	ID number assigned to the indicated browsable counter number
`_browseNameid3`	_browseNameid3	ID number assigned to the indicated browsable counter number
`_browseName3`	_browseName3	ID number assigned to the indicated browsable counter number
`_browseNameid4`	_browseNameid4	ID number assigned to the indicated browsable counter number
`_browseName4`	_browseName4	ID number assigned to the indicated browsable counter number
`_browseNameid5`	_browseNameid5	ID number assigned to the indicated browsable counter number
`_browseName5`	_browseName5	ID number assigned to the indicated browsable counter number
`_browseName6`	_browseName6	ID number assigned to the indicated browsable counter number
`_browseNameid6`	_browseNameid6	ID number assigned to the indicated browsable counter number
`_browseNameid7`	_browseNameid7	ID number assigned to the indicated browsable counter number
`_browseName7`	_browseName7	ID number assigned to the indicated browsable counter number
`_browseNameid8`	_browseNameid8	ID number assigned to the indicated browsable counter number
`_browseName8`	_browseName8	ID number assigned to the indicated browsable counter number
`_browseNameid9`	_browseNameid9	ID number assigned to the indicated browsable counter number
`_browseName9`	_browseName9	ID number assigned to the indicated browsable counter number
`_browseName10`	_browseName10	ID number assigned to the indicated browsable counter number
`_browseNameid10`	_browseNameid10	ID number assigned to the indicated browsable counter number
`_browseName11`	_browseName11	ID number assigned to the indicated browsable counter number
`_browseNameid11`	_browseNameid11	ID number assigned to the indicated browsable counter number
`_browseNameid12`	_browseNameid12	ID number assigned to the indicated browsable counter number
`_browseName12`	_browseName12	ID number assigned to the indicated browsable counter number
`_browseName13`	_browseName13	ID number assigned to the indicated browsable counter number
`_browseNameid13`	_browseNameid13	ID number assigned to the indicated browsable counter number
`_browseName14`	_browseName14	ID number assigned to the indicated browsable counter number
`_browseNameid14`	_browseNameid14	ID number assigned to the indicated browsable counter number
`_browseName15`	_browseName15	ID number assigned to the indicated browsable counter number
`_browseNameid15`	_browseNameid15	ID number assigned to the indicated browsable counter number
`_browseName16`	_browseName16	ID number assigned to the indicated browsable counter number
`_browseNameid16`	_browseNameid16	ID number assigned to the indicated browsable counter number
`_browseNameid17`	_browseNameid17	ID number assigned to the indicated browsable counter number
`_browseName17`	_browseName17	ID number assigned to the indicated browsable counter number
`_browseName18`	_browseName18	ID number assigned to the indicated browsable counter number
`_browseNameid18`	_browseNameid18	ID number assigned to the indicated browsable counter number
`_browseNameid19`	_browseNameid19	ID number assigned to the indicated browsable counter number
`_browseName19`	_browseName19	ID number assigned to the indicated browsable counter number
`_browseNameid20`	_browseNameid20	ID number assigned to the indicated browsable counter number
`_browseName20`	_browseName20	ID number assigned to the indicated browsable counter number
`_browseNameid21`	_browseNameid21	ID number assigned to the indicated browsable counter number
`_browseName21`	_browseName21	ID number assigned to the indicated browsable counter number
`_browseName22`	_browseName22	ID number assigned to the indicated browsable counter number
`_browseNameid22`	_browseNameid22	ID number assigned to the indicated browsable counter number
`_browseNameid23`	_browseNameid23	ID number assigned to the indicated browsable counter number
`_browseName23`	_browseName23	ID number assigned to the indicated browsable counter number
`_browseName24`	_browseName24	ID number assigned to the indicated browsable counter number
`_browseNameid24`	_browseNameid24	ID number assigned to the indicated browsable counter number
`_browseName25`	_browseName25	ID number assigned to the indicated browsable counter number
`_browseNameid25`	_browseNameid25	ID number assigned to the indicated browsable counter number
`_browseName26`	_browseName26	ID number assigned to the indicated browsable counter number
`_browseNameid26`	_browseNameid26	ID number assigned to the indicated browsable counter number
`_browseName27`	_browseName27	ID number assigned to the indicated browsable counter number
`_browseNameid27`	_browseNameid27	ID number assigned to the indicated browsable counter number
`_browseName28`	_browseName28	ID number assigned to the indicated browsable counter number
`_browseNameid28`	_browseNameid28	ID number assigned to the indicated browsable counter number
`_browseNameid29`	_browseNameid29	ID number assigned to the indicated browsable counter number
`_browseName29`	_browseName29	ID number assigned to the indicated browsable counter number
`_browseNameid30`	_browseNameid30	ID number assigned to the indicated browsable counter number
`_browseName30`	_browseName30	ID number assigned to the indicated browsable counter number
`_browseNameid31`	_browseNameid31	ID number assigned to the indicated browsable counter number
`_browseName31`	_browseName31	ID number assigned to the indicated browsable counter number
`_browseName32`	_browseName32	ID number assigned to the indicated browsable counter number
`_browseNameid32`	_browseNameid32	ID number assigned to the indicated browsable counter number
`_browseName33`	_browseName33	ID number assigned to the indicated browsable counter number
`_browseNameid33`	_browseNameid33	ID number assigned to the indicated browsable counter number
`_browseName34`	_browseName34	ID number assigned to the indicated browsable counter number
`_browseNameid34`	_browseNameid34	ID number assigned to the indicated browsable counter number
`_browseName35`	_browseName35	ID number assigned to the indicated browsable counter number
`_browseNameid35`	_browseNameid35	ID number assigned to the indicated browsable counter number
`_browseNameid36`	_browseNameid36	ID number assigned to the indicated browsable counter number
`_browseName36`	_browseName36	ID number assigned to the indicated browsable counter number
`_browseName37`	_browseName37	ID number assigned to the indicated browsable counter number
`_browseNameid37`	_browseNameid37	ID number assigned to the indicated browsable counter number
`_browseName38`	_browseName38	ID number assigned to the indicated browsable counter number
`_browseNameid38`	_browseNameid38	ID number assigned to the indicated browsable counter number
`_browseName39`	_browseName39	ID number assigned to the indicated browsable counter number
`_browseNameid39`	_browseNameid39	ID number assigned to the indicated browsable counter number
`_browseNameid40`	_browseNameid40	ID number assigned to the indicated browsable counter number
`_browseName40`	_browseName40	ID number assigned to the indicated browsable counter number
`_browse`	Counters	Current selection of counters.
`_frequency`	Update every	amount of time between checks of a monitor
`_name`	Title	title that should appear in the Monitor table (optional)
`_disabled`	Disable	temporarily disable monitor sampling and alerting
`_verifyError`	Verify Error	if the monitor detects an error, immediately perform the check again to verify the error.
`_errorFrequency`	Update every (on errors)	the amount of time between checks whenever the status of the monitor is not ok; the Update value from above is used if this is left blank
`_schedule`	Schedule	schedule for the monitor to be enabled - for example, "weekdays, 9-6" enables the monitor to run from 9am to 6pm, Monday - Friday
`_notLogToTopaz`	Stop Logging To Mercury Application Management	Check this box to not log the data for this monitor to Mercury Application Management
`_monitorDescription`	Monitor Description	additional description of monitor that appears on Monitor Detail page (optional)
`_onlyStatusChanges`	_onlyStatusChanges	state of the indicated configuration option
`_description`	Report Description	additional description of monitor that appears on Reports and in monitor popup info (optional)
`_logOnlyThresholdMeas`	_logOnlyThresholdMeas	state of the indicated configuration option
`_logOnlyMonitorData`	_logOnlyMonitorData	state of the indicated configuration option
`__template`	Monitor Template	monitor template to use for this monitor
`_dependsOn`	Depends On	Choose the monitor that this monitor depends on
`_dependsCondition`	Depends Condition	If OK, this monitor is only enabled if the Depends On monitor is OK.

Monitor Type: SNMP by MIB


name	label	description
`browsableValue2`	browsableValue2	value of the indicated browsable counter
`browsableValue3`	browsableValue3	value of the indicated browsable counter
`browsableValue4`	browsableValue4	value of the indicated browsable counter
`browsableValue5`	browsableValue5	value of the indicated browsable counter
`browsableValue6`	browsableValue6	value of the indicated browsable counter
`browsableValue7`	browsableValue7	value of the indicated browsable counter
`browsableValue8`	browsableValue8	value of the indicated browsable counter
`browsableValue9`	browsableValue9	value of the indicated browsable counter
`browsableValue10`	browsableValue10	value of the indicated browsable counter
`_server`	Server	the IP address or host name of the agent
`_mibfile`	MIB File	the MIB file from which this monitor should read OIDs
`_snmpversion`	SNMP Version	the version of SNMP to use when requesting data from the server
`_community`	V1/V2 Community	the community for the SNMP agent for SNMP V1/V2 only
`_browseNameid1`	_browseNameid1	ID number assigned to the indicated browsable counter number
`_browseName1`	_browseName1	ID number assigned to the indicated browsable counter number
`_snmpv3authtype`	SNMP V3 Authentication Type	Type of authentication to be used for SNMP V3 only
`_browseNameid2`	_browseNameid2	ID number assigned to the indicated browsable counter number
`_browseName2`	_browseName2	ID number assigned to the indicated browsable counter number
`_browseNameid3`	_browseNameid3	ID number assigned to the indicated browsable counter number
`_browseName3`	_browseName3	ID number assigned to the indicated browsable counter number
`_snmpv3username`	SNMP V3 Username	Username to be used for authentication for SNMP V3 only
`_browseNameid4`	_browseNameid4	ID number assigned to the indicated browsable counter number
`_browseName4`	_browseName4	ID number assigned to the indicated browsable counter number
`_snmpv3authpassword`	SNMP V3 Authentication Password	Password to be used for authentication for SNMP V3 only
`_browseNameid5`	_browseNameid5	ID number assigned to the indicated browsable counter number
`_browseName5`	_browseName5	ID number assigned to the indicated browsable counter number
`_snmpv3privpassword`	SNMP V3 Privacy Password	Password to be used for DES privacy for SNMP V3 only
`_browseName6`	_browseName6	ID number assigned to the indicated browsable counter number
`_contextEngineID`	SNMP V3 Context Engine ID	a hexidecimal string representing the Context Engine ID to use for this connection for SNMP V3 only
`_browseNameid6`	_browseNameid6	ID number assigned to the indicated browsable counter number
`_contextName`	SNMP V3 Context Name	the Context Name to use for this connection for SNMP V3 only
`_browseName7`	_browseName7	ID number assigned to the indicated browsable counter number
`_browseNameid7`	_browseNameid7	ID number assigned to the indicated browsable counter number
`_browseName8`	_browseName8	ID number assigned to the indicated browsable counter number
`_browseNameid8`	_browseNameid8	ID number assigned to the indicated browsable counter number
`_browseName9`	_browseName9	ID number assigned to the indicated browsable counter number
`_browseNameid9`	_browseNameid9	ID number assigned to the indicated browsable counter number
`_browseNameid10`	_browseNameid10	ID number assigned to the indicated browsable counter number
`_browseName10`	_browseName10	ID number assigned to the indicated browsable counter number
`_browse`	Counters	Current selection of counters.
`_frequency`	Update every	amount of time between checks of a monitor
`_name`	Title	title that should appear in the Monitor table (optional)
`_disabled`	Disable	temporarily disable monitor sampling and alerting
`_timeout`	Timeout	the time in seconds to wait for all requests to complete (including retries)
`_retries`	Retries	the number of times to retry a request that has timed out
`_port`	Port	the port number on which to query the SNMP agent
`_counterCalculationMode`	Counter Calculation Mode	choose a calculation to perform on objects of type Counter, Counter32, or Counter64
`_verifyError`	Verify Error	if the monitor detects an error, immediately perform the check again to verify the error.
`_errorFrequency`	Update every (on errors)	the amount of time between checks whenever the status of the monitor is not ok; the Update value from above is used if this is left blank
`_notLogToTopaz`	Stop Logging To Mercury Application Management	Check this box to not log the data for this monitor to Mercury Application Management
`_schedule`	Schedule	schedule for the monitor to be enabled - for example, "weekdays, 9-6" enables the monitor to run from 9am to 6pm, Monday - Friday
`_onlyStatusChanges`	_onlyStatusChanges	state of the indicated configuration option
`_monitorDescription`	Monitor Description	additional description of monitor that appears on Monitor Detail page (optional)
`_logOnlyThresholdMeas`	_logOnlyThresholdMeas	state of the indicated configuration option
`_description`	Report Description	additional description of monitor that appears on Reports and in monitor popup info (optional)
`_logOnlyMonitorData`	_logOnlyMonitorData	state of the indicated configuration option
`__template`	Monitor Template	monitor template to use for this monitor
`_dependsOn`	Depends On	Choose the monitor that this monitor depends on
`_dependsCondition`	Depends Condition	If OK, this monitor is only enabled if the Depends On monitor is OK.

Monitor Type: BroadVision Application Server


name	label	description
`browsableValue1`	browsableValue1	value of the indicated measurement
`browsableValue2`	browsableValue2	value of the indicated browsable counter
`browsableValue3`	browsableValue3	value of the indicated browsable counter
`browsableValue4`	browsableValue4	value of the indicated browsable counter
`browsableValue5`	browsableValue5	value of the indicated browsable counter
`browsableValue6`	browsableValue6	value of the indicated browsable counter
`browsableValue7`	browsableValue7	value of the indicated browsable counter
`browsableValue8`	browsableValue8	value of the indicated browsable counter
`browsableValue9`	browsableValue9	value of the indicated browsable counter
`browsableValue10`	browsableValue10	value of the indicated browsable counter
`_browseName1`	_browseName1	ID number assigned to the indicated browsable counter number
`_browseNameid1`	_browseNameid1	ID number assigned to the indicated browsable counter number
`_BVPort`	Port	the BroadVision port number
`_BVServer`	Server	the name of BroadVision server
`_browseName2`	_browseName2	ID number assigned to the indicated browsable counter number
`_browseNameid2`	_browseNameid2	ID number assigned to the indicated browsable counter number
`_browseName3`	_browseName3	ID number assigned to the indicated browsable counter number
`_browseNameid3`	_browseNameid3	ID number assigned to the indicated browsable counter number
`_browseNameid4`	_browseNameid4	ID number assigned to the indicated browsable counter number
`_browseName4`	_browseName4	ID number assigned to the indicated browsable counter number
`_browseNameid5`	_browseNameid5	ID number assigned to the indicated browsable counter number
`_browseName5`	_browseName5	ID number assigned to the indicated browsable counter number
`_browseNameid6`	_browseNameid6	ID number assigned to the indicated browsable counter number
`_browseName6`	_browseName6	ID number assigned to the indicated browsable counter number
`_browseName7`	_browseName7	ID number assigned to the indicated browsable counter number
`_browseNameid7`	_browseNameid7	ID number assigned to the indicated browsable counter number
`_browseName8`	_browseName8	ID number assigned to the indicated browsable counter number
`_browseNameid8`	_browseNameid8	ID number assigned to the indicated browsable counter number
`_browseName9`	_browseName9	ID number assigned to the indicated browsable counter number
`_browseNameid9`	_browseNameid9	ID number assigned to the indicated browsable counter number
`_browseNameid10`	_browseNameid10	ID number assigned to the indicated browsable counter number
`_browseName10`	_browseName10	ID number assigned to the indicated browsable counter number
`_browse`	Counters	Current selection of counters.
`_frequency`	Update every	amount of time between checks of a monitor
`_name`	Title	title that should appear in the Monitor table (optional)
`_disabled`	Disable	temporarily disable monitor sampling and alerting
`_verifyError`	Verify Error	if the monitor detects an error, immediately perform the check again to verify the error.
`_errorFrequency`	Update every (on errors)	the amount of time between checks whenever the status of the monitor is not ok; the Update value from above is used if this is left blank
`_notLogToTopaz`	Stop Logging To Mercury Application Management	Check this box to not log the data for this monitor to Mercury Application Management
`_schedule`	Schedule	schedule for the monitor to be enabled - for example, "weekdays, 9-6" enables the monitor to run from 9am to 6pm, Monday - Friday
`_onlyStatusChanges`	_onlyStatusChanges	state of the indicated configuration option
`_monitorDescription`	Monitor Description	additional description of monitor that appears on Monitor Detail page (optional)
`_logOnlyThresholdMeas`	_logOnlyThresholdMeas	state of the indicated configuration option
`_description`	Report Description	additional description of monitor that appears on Reports and in monitor popup info (optional)
`_logOnlyMonitorData`	_logOnlyMonitorData	state of the indicated configuration option
`__template`	Monitor Template	monitor template to use for this monitor
`_dependsOn`	Depends On	Choose the monitor that this monitor depends on
`_dependsCondition`	Depends Condition	If OK, this monitor is only enabled if the Depends On monitor is OK.

Monitor Type: CheckPoint Firewall-1


name	label	description
`value0`	Counter 1 Value	value of the indicated counter
`value1`	Counter 2 Value	value of the indicated counter
`value2`	Counter 3 Value	value of the indicated counter
`value3`	Counter 4 Value	value of the indicated counter
`value4`	Counter 5 Value	value of the indicated counter
`value5`	Counter 6 Value	value of the indicated counter
`value6`	Counter 7 Value	value of the indicated counter
`value7`	Counter 8 Value	value of the indicated counter
`value8`	Counter 9 Value	value of the indicated counter
`value9`	Counter 10 Value	value of the indicated counter
`_counters`	Counters	the current selection of counterschoose counters
`_host`	Host Name	the IP address or host name of the CheckPoint Server to be monitored.
`_index`	Index	the index of the SNMP object - for non-table object IDs, this is 0
`_community`	Community	Community for the SNMP object
`_frequency`	Update every	amount of time between checks of a monitor
`_name`	Title	title that should appear in the Monitor table (optional)
`_disabled`	Disable	temporarily disable monitor sampling and alerting
`_retryDelay`	Retry Delay	the time, in seconds, to wait before retrying the request
`_timeout`	Timeout	the total time, in seconds, to wait for a successful reply
`_verifyError`	Verify Error	if the monitor detects an error, immediately perform the check again to verify the error.
`_errorFrequency`	Update every (on errors)	the amount of time between checks whenever the status of the monitor is not ok; the Update value from above is used if this is left blank
`_notLogToTopaz`	Stop Logging To Mercury Application Management	Check this box to not log the data for this monitor to Mercury Application Management
`_schedule`	Schedule	schedule for the monitor to be enabled - for example, "weekdays, 9-6" enables the monitor to run from 9am to 6pm, Monday - Friday
`_onlyStatusChanges`	_onlyStatusChanges	state of the indicated configuration option
`_monitorDescription`	Monitor Description	additional description of monitor that appears on Monitor Detail page (optional)
`_logOnlyThresholdMeas`	_logOnlyThresholdMeas	state of the indicated configuration option
`_description`	Report Description	additional description of monitor that appears on Reports and in monitor popup info (optional)
`_logOnlyMonitorData`	_logOnlyMonitorData	state of the indicated configuration option
`__template`	Monitor Template	monitor template to use for this monitor
`_dependsOn`	Depends On	Choose the monitor that this monitor depends on
`_dependsCondition`	Depends Condition	If OK, this monitor is only enabled if the Depends On monitor is OK.

Monitor Type: Cisco Works


name	label	description
`browsableValue2`	browsableValue2	value of the indicated browsable counter
`browsableValue3`	browsableValue3	value of the indicated browsable counter
`browsableValue4`	browsableValue4	value of the indicated browsable counter
`browsableValue5`	browsableValue5	value of the indicated browsable counter
`browsableValue6`	browsableValue6	value of the indicated browsable counter
`browsableValue7`	browsableValue7	value of the indicated browsable counter
`browsableValue8`	browsableValue8	value of the indicated browsable counter
`browsableValue9`	browsableValue9	value of the indicated browsable counter
`browsableValue10`	browsableValue10	value of the indicated browsable counter
`_server`	Server	the IP address or host name of the agent
`_mibfile`	MIB File	the MIB file from which this monitor should read OIDs
`_snmpversion`	SNMP Version	the version of SNMP to use when requesting data from the server
`_community`	V1/V2 Community	the community for the SNMP agent for SNMP V1/V2 only
`_browseNameid1`	_browseNameid1	ID number assigned to the indicated browsable counter number
`_browseName1`	_browseName1	ID number assigned to the indicated browsable counter number
`_snmpv3authtype`	SNMP V3 Authentication Type	Type of authentication to be used for SNMP V3 only
`_browseNameid2`	_browseNameid2	ID number assigned to the indicated browsable counter number
`_browseName2`	_browseName2	ID number assigned to the indicated browsable counter number
`_browseNameid3`	_browseNameid3	ID number assigned to the indicated browsable counter number
`_browseName3`	_browseName3	ID number assigned to the indicated browsable counter number
`_snmpv3username`	SNMP V3 Username	Username to be used for authentication for SNMP V3 only
`_browseNameid4`	_browseNameid4	ID number assigned to the indicated browsable counter number
`_browseName4`	_browseName4	ID number assigned to the indicated browsable counter number
`_snmpv3authpassword`	SNMP V3 Authentication Password	Password to be used for authentication for SNMP V3 only
`_browseNameid5`	_browseNameid5	ID number assigned to the indicated browsable counter number
`_browseName5`	_browseName5	ID number assigned to the indicated browsable counter number
`_snmpv3privpassword`	SNMP V3 Privacy Password	Password to be used for DES privacy for SNMP V3 only
`_browseName6`	_browseName6	ID number assigned to the indicated browsable counter number
`_contextEngineID`	SNMP V3 Context Engine ID	a hexidecimal string representing the Context Engine ID to use for this connection for SNMP V3 only
`_browseNameid6`	_browseNameid6	ID number assigned to the indicated browsable counter number
`_contextName`	SNMP V3 Context Name	the Context Name to use for this connection for SNMP V3 only
`_browseName7`	_browseName7	ID number assigned to the indicated browsable counter number
`_browseNameid7`	_browseNameid7	ID number assigned to the indicated browsable counter number
`_browseName8`	_browseName8	ID number assigned to the indicated browsable counter number
`_browseNameid8`	_browseNameid8	ID number assigned to the indicated browsable counter number
`_browseName9`	_browseName9	ID number assigned to the indicated browsable counter number
`_browseNameid9`	_browseNameid9	ID number assigned to the indicated browsable counter number
`_browseNameid10`	_browseNameid10	ID number assigned to the indicated browsable counter number
`_browseName10`	_browseName10	ID number assigned to the indicated browsable counter number
`_browse`	Counters	Current selection of counters.
`_frequency`	Update every	amount of time between checks of a monitor
`_name`	Title	title that should appear in the Monitor table (optional)
`_disabled`	Disable	temporarily disable monitor sampling and alerting
`_timeout`	Timeout	the time in seconds to wait for all requests to complete (including retries)
`_retries`	Retries	the number of times to retry a request that has timed out
`_port`	Port	the port number on which to query the SNMP agent
`_counterCalculationMode`	Counter Calculation Mode	choose a calculation to perform on objects of type Counter, Counter32, or Counter64
`_verifyError`	Verify Error	if the monitor detects an error, immediately perform the check again to verify the error.
`_errorFrequency`	Update every (on errors)	the amount of time between checks whenever the status of the monitor is not ok; the Update value from above is used if this is left blank
`_notLogToTopaz`	Stop Logging To Mercury Application Management	Check this box to not log the data for this monitor to Mercury Application Management
`_schedule`	Schedule	schedule for the monitor to be enabled - for example, "weekdays, 9-6" enables the monitor to run from 9am to 6pm, Monday - Friday
`_onlyStatusChanges`	_onlyStatusChanges	state of the indicated configuration option
`_monitorDescription`	Monitor Description	additional description of monitor that appears on Monitor Detail page (optional)
`_logOnlyThresholdMeas`	_logOnlyThresholdMeas	state of the indicated configuration option
`_description`	Report Description	additional description of monitor that appears on Reports and in monitor popup info (optional)
`_logOnlyMonitorData`	_logOnlyMonitorData	state of the indicated configuration option
`__template`	Monitor Template	monitor template to use for this monitor
`_dependsOn`	Depends On	Choose the monitor that this monitor depends on
`_dependsCondition`	Depends Condition	If OK, this monitor is only enabled if the Depends On monitor is OK.

Monitor Type: Citrix Server


name	label	description
`browsableValue2`	browsableValue2	value of the indicated browsable counter
`browsableValue3`	browsableValue3	value of the indicated browsable counter
`browsableValue4`	browsableValue4	value of the indicated browsable counter
`browsableValue5`	browsableValue5	value of the indicated browsable counter
`browsableValue6`	browsableValue6	value of the indicated browsable counter
`browsableValue7`	browsableValue7	value of the indicated browsable counter
`browsableValue8`	browsableValue8	value of the indicated browsable counter
`browsableValue9`	browsableValue9	value of the indicated browsable counter
`browsableValue10`	browsableValue10	value of the indicated browsable counter
`browsableValue11`	browsableValue11	value of the indicated browsable counter
`browsableValue12`	browsableValue12	value of the indicated browsable counter
`browsableValue13`	browsableValue13	value of the indicated browsable counter
`browsableValue14`	browsableValue14	value of the indicated browsable counter
`browsableValue15`	browsableValue15	value of the indicated browsable counter
`browsableValue16`	browsableValue16	value of the indicated browsable counter
`browsableValue17`	browsableValue17	value of the indicated browsable counter
`browsableValue18`	browsableValue18	value of the indicated browsable counter
`browsableValue19`	browsableValue19	value of the indicated browsable counter
`browsableValue20`	browsableValue20	value of the indicated browsable counter
`browsableValue21`	browsableValue21	value of the indicated browsable counter
`browsableValue22`	browsableValue22	value of the indicated browsable counter
`browsableValue23`	browsableValue23	value of the indicated browsable counter
`browsableValue24`	browsableValue24	value of the indicated browsable counter
`browsableValue25`	browsableValue25	value of the indicated browsable counter
`browsableValue26`	browsableValue26	value of the indicated browsable counter
`browsableValue27`	browsableValue27	value of the indicated browsable counter
`browsableValue28`	browsableValue28	value of the indicated browsable counter
`browsableValue29`	browsableValue29	value of the indicated browsable counter
`browsableValue30`	browsableValue30	value of the indicated browsable counter
`_server`	Server	the server to monitor
`_browseName1`	_browseName1	ID number assigned to the indicated browsable counter number
`_browseNameid1`	_browseNameid1	ID number assigned to the indicated browsable counter number
`_browseName2`	_browseName2	ID number assigned to the indicated browsable counter number
`_browseNameid2`	_browseNameid2	ID number assigned to the indicated browsable counter number
`_browseName3`	_browseName3	ID number assigned to the indicated browsable counter number
`_browseNameid3`	_browseNameid3	ID number assigned to the indicated browsable counter number
`_browseName4`	_browseName4	ID number assigned to the indicated browsable counter number
`_browseNameid4`	_browseNameid4	ID number assigned to the indicated browsable counter number
`_browseNameid5`	_browseNameid5	ID number assigned to the indicated browsable counter number
`_browseName5`	_browseName5	ID number assigned to the indicated browsable counter number
`_browseName6`	_browseName6	ID number assigned to the indicated browsable counter number
`_browseNameid6`	_browseNameid6	ID number assigned to the indicated browsable counter number
`_browseName7`	_browseName7	ID number assigned to the indicated browsable counter number
`_browseNameid7`	_browseNameid7	ID number assigned to the indicated browsable counter number
`_browseName8`	_browseName8	ID number assigned to the indicated browsable counter number
`_browseNameid8`	_browseNameid8	ID number assigned to the indicated browsable counter number
`_browseNameid9`	_browseNameid9	ID number assigned to the indicated browsable counter number
`_browseName9`	_browseName9	ID number assigned to the indicated browsable counter number
`_browseName10`	_browseName10	ID number assigned to the indicated browsable counter number
`_browseNameid10`	_browseNameid10	ID number assigned to the indicated browsable counter number
`_browseName11`	_browseName11	ID number assigned to the indicated browsable counter number
`_browseNameid11`	_browseNameid11	ID number assigned to the indicated browsable counter number
`_browseNameid12`	_browseNameid12	ID number assigned to the indicated browsable counter number
`_browseName12`	_browseName12	ID number assigned to the indicated browsable counter number
`_browseNameid13`	_browseNameid13	ID number assigned to the indicated browsable counter number
`_browseName13`	_browseName13	ID number assigned to the indicated browsable counter number
`_browseNameid14`	_browseNameid14	ID number assigned to the indicated browsable counter number
`_browseName14`	_browseName14	ID number assigned to the indicated browsable counter number
`_browseNameid15`	_browseNameid15	ID number assigned to the indicated browsable counter number
`_browseName15`	_browseName15	ID number assigned to the indicated browsable counter number
`_browseNameid16`	_browseNameid16	ID number assigned to the indicated browsable counter number
`_browseName16`	_browseName16	ID number assigned to the indicated browsable counter number
`_browseName17`	_browseName17	ID number assigned to the indicated browsable counter number
`_browseNameid17`	_browseNameid17	ID number assigned to the indicated browsable counter number
`_browseName18`	_browseName18	ID number assigned to the indicated browsable counter number
`_browseNameid18`	_browseNameid18	ID number assigned to the indicated browsable counter number
`_browseName19`	_browseName19	ID number assigned to the indicated browsable counter number
`_browseNameid19`	_browseNameid19	ID number assigned to the indicated browsable counter number
`_browseNameid20`	_browseNameid20	ID number assigned to the indicated browsable counter number
`_browseName20`	_browseName20	ID number assigned to the indicated browsable counter number
`_browseNameid21`	_browseNameid21	ID number assigned to the indicated browsable counter number
`_browseName21`	_browseName21	ID number assigned to the indicated browsable counter number
`_browseNameid22`	_browseNameid22	ID number assigned to the indicated browsable counter number
`_browseName22`	_browseName22	ID number assigned to the indicated browsable counter number
`_browseName23`	_browseName23	ID number assigned to the indicated browsable counter number
`_browseNameid23`	_browseNameid23	ID number assigned to the indicated browsable counter number
`_browseNameid24`	_browseNameid24	ID number assigned to the indicated browsable counter number
`_browseName24`	_browseName24	ID number assigned to the indicated browsable counter number
`_browseName25`	_browseName25	ID number assigned to the indicated browsable counter number
`_browseNameid25`	_browseNameid25	ID number assigned to the indicated browsable counter number
`_browseName26`	_browseName26	ID number assigned to the indicated browsable counter number
`_browseNameid26`	_browseNameid26	ID number assigned to the indicated browsable counter number
`_browseNameid27`	_browseNameid27	ID number assigned to the indicated browsable counter number
`_browseName27`	_browseName27	ID number assigned to the indicated browsable counter number
`_browseName28`	_browseName28	ID number assigned to the indicated browsable counter number
`_browseNameid28`	_browseNameid28	ID number assigned to the indicated browsable counter number
`_browseName29`	_browseName29	ID number assigned to the indicated browsable counter number
`_browseNameid29`	_browseNameid29	ID number assigned to the indicated browsable counter number
`_browseNameid30`	_browseNameid30	ID number assigned to the indicated browsable counter number
`_browseName30`	_browseName30	ID number assigned to the indicated browsable counter number
`_browse`	Counters	Current selection of counters.
`_frequency`	Update every	amount of time between checks of a monitor
`_name`	Title	title that should appear in the Monitor table (optional)
`_disabled`	Disable	temporarily disable monitor sampling and alerting
`_verifyError`	Verify Error	if the monitor detects an error, immediately perform the check again to verify the error.
`_errorFrequency`	Update every (on errors)	the amount of time between checks whenever the status of the monitor is not ok; the Update value from above is used if this is left blank
`_notLogToTopaz`	Stop Logging To Mercury Application Management	Check this box to not log the data for this monitor to Mercury Application Management
`_schedule`	Schedule	schedule for the monitor to be enabled - for example, "weekdays, 9-6" enables the monitor to run from 9am to 6pm, Monday - Friday
`_onlyStatusChanges`	_onlyStatusChanges	state of the indicated configuration option
`_monitorDescription`	Monitor Description	additional description of monitor that appears on Monitor Detail page (optional)
`_logOnlyThresholdMeas`	_logOnlyThresholdMeas	state of the indicated configuration option
`_description`	Report Description	additional description of monitor that appears on Reports and in monitor popup info (optional)
`_logOnlyMonitorData`	_logOnlyMonitorData	state of the indicated configuration option
`__template`	Monitor Template	monitor template to use for this monitor
`_dependsOn`	Depends On	Choose the monitor that this monitor depends on
`_dependsCondition`	Depends Condition	If OK, this monitor is only enabled if the Depends On monitor is OK.

Monitor Type: ColdFusion Server


name	label	description
`value0`	Counter 1 Value	value of the indicated counter
`value1`	Counter 2 Value	value of the indicated counter
`value2`	Counter 3 Value	value of the indicated counter
`value3`	Counter 4 Value	value of the indicated counter
`value4`	Counter 5 Value	value of the indicated counter
`value5`	Counter 6 Value	value of the indicated counter
`value6`	Counter 7 Value	value of the indicated counter
`value7`	Counter 8 Value	value of the indicated counter
`value8`	Counter 9 Value	value of the indicated counter
`value9`	Counter 10 Value	value of the indicated counter
`value10`	Counter 11 Value	value of the indicated counter
`value11`	Counter 12 Value	value of the indicated counter
`value12`	Counter 13 Value	value of the indicated counter
`value13`	Counter 14 Value	value of the indicated counter
`value14`	Counter 15 Value	value of the indicated counter
`value15`	Counter 16 Value	value of the indicated counter
`value16`	Counter 17 Value	value of the indicated counter
`value17`	Counter 18 Value	value of the indicated counter
`value18`	Counter 19 Value	value of the indicated counter
`value19`	Counter 20 Value	value of the indicated counter
`_counters`	Counters	the current selection of counterschoose counters
`remoteMachineName`	Remote Server	use this field instead of `_machine`, if you need the name of the remote machine to appear in the template
`_frequency`	Update every	amount of time between checks of a monitor
`_name`	Title	title that should appear in the Monitor table (optional)
`_disabled`	Disable	temporarily disable monitor sampling and alerting
`_verifyError`	Verify Error	if the monitor detects an error, immediately perform the check again to verify the error.
`_errorFrequency`	Update every (on errors)	the amount of time between checks whenever the status of the monitor is not ok; the Update value from above is used if this is left blank
`_notLogToTopaz`	Stop Logging To Mercury Application Management	Check this box to not log the data for this monitor to Mercury Application Management
`_schedule`	Schedule	schedule for the monitor to be enabled - for example, "weekdays, 9-6" enables the monitor to run from 9am to 6pm, Monday - Friday
`_onlyStatusChanges`	_onlyStatusChanges	state of the indicated configuration option
`_monitorDescription`	Monitor Description	additional description of monitor that appears on Monitor Detail page (optional)
`_description`	Report Description	additional description of monitor that appears on Reports and in monitor popup info (optional)
`_logOnlyThresholdMeas`	_logOnlyThresholdMeas	state of the indicated configuration option
`_logOnlyMonitorData`	_logOnlyMonitorData	state of the indicated configuration option
`__template`	Monitor Template	monitor template to use for this monitor
`_dependsOn`	Depends On	Choose the monitor that this monitor depends on
`_dependsCondition`	Depends Condition	If OK, this monitor is only enabled if the Depends On monitor is OK.

Monitor Type: Composite


name	label	description
`percentGood`	% items OK	most recent % items OK reported
`itemsInError`	items in error	most recent items in error reported
`nameItemsInError`	name of the items in error	most recent name of the items in error reported
`nameItemsInWarning`	name of the items in warning	most recent name of the items in warning reported
`_item`	Items	select one or more groups and/or monitors that will be checked
`_frequency`	Update every	amount of time between checks of a monitor
`_name`	Title	title that should appear in the Monitor table (optional)
`_disabled`	Disable	temporarily disable monitor sampling and alerting
`_checkSequentially`	Run Monitors	Run each monitor before checking.
`_delay`	Monitor Delay	If running each monitor, delay in seconds between monitors
`_deepCheck`	Check All Monitors in Group(s)	By default, a group is counted as a single item when checking status. If this box is checked, all of the monitors in selected groups (and their subgroups) are checked and counted towards the totals.
`_verifyError`	Verify Error	if the monitor detects an error, immediately perform the check again to verify the error.
`_errorFrequency`	Update every (on errors)	the amount of time between checks whenever the status of the monitor is not ok; the Update value from above is used if this is left blank
`_notLogToTopaz`	Stop Logging To Mercury Application Management	Check this box to not log the data for this monitor to Mercury Application Management
`_schedule`	Schedule	schedule for the monitor to be enabled - for example, "weekdays, 9-6" enables the monitor to run from 9am to 6pm, Monday - Friday
`_onlyStatusChanges`	_onlyStatusChanges	state of the indicated configuration option
`_monitorDescription`	Monitor Description	additional description of monitor that appears on Monitor Detail page (optional)
`_logOnlyThresholdMeas`	_logOnlyThresholdMeas	state of the indicated configuration option
`_description`	Report Description	additional description of monitor that appears on Reports and in monitor popup info (optional)
`_logOnlyMonitorData`	_logOnlyMonitorData	state of the indicated configuration option
`__template`	Monitor Template	monitor template to use for this monitor
`_dependsOn`	Depends On	Choose the monitor that this monitor depends on
`_dependsCondition`	Depends Condition	If OK, this monitor is only enabled if the Depends On monitor is OK.

Monitor Type: CPU Utilization


name	label	description
`lastMeasurement1`	lastMeasurement1	value of the indicated measurement
`lastMeasurement2`	lastMeasurement2	value of the indicated measurement
`lastMeasurement3`	lastMeasurement3	value of the indicated measurement
`lastMeasurement4`	lastMeasurement4	value of the indicated measurement
`lastMeasurement5`	lastMeasurement5	value of the indicated measurement
`lastMeasurement6`	lastMeasurement6	value of the indicated measurement
`lastMeasurement7`	lastMeasurement7	value of the indicated measurement
`lastMeasurement8`	lastMeasurement8	value of the indicated measurement
`lastMeasurement9`	lastMeasurement9	value of the indicated measurement
`lastMeasurement`	lastMeasurement	value of the indicated measurement
`cpusNum`	cpusNum	value of the indicated measurement
`lastMeasurement10`	lastMeasurement10	value of the indicated measurement
`lastMeasurement11`	lastMeasurement11	value of the indicated measurement
`lastMeasurement12`	lastMeasurement12	value of the indicated measurement
`lastMeasurement13`	lastMeasurement13	value of the indicated measurement
`lastMeasurement14`	lastMeasurement14	value of the indicated measurement
`lastMeasurement15`	lastMeasurement15	value of the indicated measurement
`lastMeasurement16`	lastMeasurement16	value of the indicated measurement
`lastMeasurementTime`	lastMeasurementTime	value of the indicated measurement
`utilizationPercentage`	utilization	utilization level of the indicated element
`utilizationPercentage1`	utilization cpu # 1	utilization level of the indicated element
`utilizationPercentage2`	utilization cpu # 2	utilization level of the indicated element
`utilizationPercentage3`	utilization cpu # 3	utilization level of the indicated element
`utilizationPercentage4`	utilization cpu # 4	utilization level of the indicated element
`utilizationPercentage5`	utilization cpu # 5	utilization level of the indicated element
`utilizationPercentage6`	utilization cpu # 6	utilization level of the indicated element
`utilizationPercentage7`	utilization cpu # 7	utilization level of the indicated element
`utilizationPercentage8`	utilization cpu # 8	utilization level of the indicated element
`utilizationPercentage9`	utilization cpu # 9	utilization level of the indicated element
`utilizationPercentage10`	utilization cpu # 10	utilization level of the indicated element
`utilizationPercentage11`	utilization cpu # 11	utilization level of the indicated element
`utilizationPercentage12`	utilization cpu # 12	utilization level of the indicated element
`utilizationPercentage13`	utilization cpu # 13	utilization level of the indicated element
`utilizationPercentage14`	utilization cpu # 14	utilization level of the indicated element
`utilizationPercentage15`	utilization cpu # 15	utilization level of the indicated element
`utilizationPercentage16`	utilization cpu # 16	utilization level of the indicated element
`remoteMachineName`	Remote Server	use this field instead of `_machine`, if you need the name of the remote machine to appear in the template
`_frequency`	Update every	amount of time between checks of a monitor
`_name`	Title	title that should appear in the Monitor table (optional)
`_disabled`	Disable	temporarily disable monitor sampling and alerting
`_verifyError`	Verify Error	if the monitor detects an error, immediately perform the check again to verify the error.
`_errorFrequency`	Update every (on errors)	the amount of time between checks whenever the status of the monitor is not ok; the Update value from above is used if this is left blank
`_schedule`	Schedule	schedule for the monitor to be enabled - for example, "weekdays, 9-6" enables the monitor to run from 9am to 6pm, Monday - Friday
`_notLogToTopaz`	Stop Logging To Mercury Application Management	Check this box to not log the data for this monitor to Mercury Application Management
`_monitorDescription`	Monitor Description	additional description of monitor that appears on Monitor Detail page (optional)
`_onlyStatusChanges`	_onlyStatusChanges	state of the indicated configuration option
`_description`	Report Description	additional description of monitor that appears on Reports and in monitor popup info (optional)
`_logOnlyThresholdMeas`	_logOnlyThresholdMeas	state of the indicated configuration option
`__template`	Monitor Template	monitor template to use for this monitor
`_logOnlyMonitorData`	_logOnlyMonitorData	state of the indicated configuration option
`_dependsOn`	Depends On	Choose the monitor that this monitor depends on
`_dependsCondition`	Depends Condition	If OK, this monitor is only enabled if the Depends On monitor is OK.

Monitor Type: Database Query


name	label	description
`status`	status	most recent status of the monitor
`resultContents`	resultContents	value of the indicated measurement
`matchValue`	content match	value of the indicated measurement
`roundTripTime`	round trip time	most recent round trip time reported
`column1`	result column 1	most recent result column 1 reported
`column2`	result column 2	most recent result column 2 reported
`rows`	rows	most recent rows reported
`_database`	Database Connection URL	Enter the URL to the database connection (for example, if the ODBC connection is called test, the URL would be jdbc:odbc:test)
`_query`	Query	the SQL statement to be performed on the database. (for example, select * from sysobjects)
`_driver`	Database Driver	the driver used to connect to the database
`_frequency`	Update every	amount of time between checks of a monitor
`_name`	Title	title that should appear in the Monitor table (optional)
`_disabled`	Disable	temporarily disable monitor sampling and alerting
`_content`	Match Content	optional, match against query result, using a string or a regular expression or XML names.
`_user`	Database User Name	optional, user name used to connect to the database
`_password`	Database Password	optional, password used to connect to the database
`_path`	File Path	Excute a query stored in a file
`_connectTimeout`	Connection Timeout	the time out, in seconds, to wait for a database connection
`_queryTimeout`	Query Timeout	the time out, in seconds, to wait for a database query
`_columnLabels`	Column Labels	Labels for the two columns returned by the query, separated by a ","
`_targetMachineName`	DB Machine Name	Identifier for target DB server, used for reporting to Mercury Application Management (optional)
`_verifyError`	Verify Error	if the monitor detects an error, immediately perform the check again to verify the error.
`_errorFrequency`	Update every (on errors)	the amount of time between checks whenever the status of the monitor is not ok; the Update value from above is used if this is left blank
`_notLogToTopaz`	Stop Logging To Mercury Application Management	Check this box to not log the data for this monitor to Mercury Application Management
`_schedule`	Schedule	schedule for the monitor to be enabled - for example, "weekdays, 9-6" enables the monitor to run from 9am to 6pm, Monday - Friday
`_onlyStatusChanges`	_onlyStatusChanges	state of the indicated configuration option
`_monitorDescription`	Monitor Description	additional description of monitor that appears on Monitor Detail page (optional)
`_logOnlyThresholdMeas`	_logOnlyThresholdMeas	state of the indicated configuration option
`_description`	Report Description	additional description of monitor that appears on Reports and in monitor popup info (optional)
`_logOnlyMonitorData`	_logOnlyMonitorData	state of the indicated configuration option
`__template`	Monitor Template	monitor template to use for this monitor
`_dependsOn`	Depends On	Choose the monitor that this monitor depends on
`_dependsCondition`	Depends Condition	If OK, this monitor is only enabled if the Depends On monitor is OK.

Monitor Type: DB2


name	label	description
`browsableValue2`	browsableValue2	value of the indicated browsable counter
`browsableValue3`	browsableValue3	value of the indicated browsable counter
`browsableValue4`	browsableValue4	value of the indicated browsable counter
`browsableValue5`	browsableValue5	value of the indicated browsable counter
`browsableValue6`	browsableValue6	value of the indicated browsable counter
`browsableValue7`	browsableValue7	value of the indicated browsable counter
`browsableValue8`	browsableValue8	value of the indicated browsable counter
`browsableValue9`	browsableValue9	value of the indicated browsable counter
`browsableValue10`	browsableValue10	value of the indicated browsable counter
`browsableValue11`	browsableValue11	value of the indicated browsable counter
`browsableValue12`	browsableValue12	value of the indicated browsable counter
`browsableValue13`	browsableValue13	value of the indicated browsable counter
`browsableValue14`	browsableValue14	value of the indicated browsable counter
`browsableValue15`	browsableValue15	value of the indicated browsable counter
`browsableValue16`	browsableValue16	value of the indicated browsable counter
`browsableValue17`	browsableValue17	value of the indicated browsable counter
`browsableValue18`	browsableValue18	value of the indicated browsable counter
`browsableValue19`	browsableValue19	value of the indicated browsable counter
`browsableValue20`	browsableValue20	value of the indicated browsable counter
`browsableValue21`	browsableValue21	value of the indicated browsable counter
`browsableValue22`	browsableValue22	value of the indicated browsable counter
`browsableValue23`	browsableValue23	value of the indicated browsable counter
`browsableValue24`	browsableValue24	value of the indicated browsable counter
`browsableValue25`	browsableValue25	value of the indicated browsable counter
`browsableValue26`	browsableValue26	value of the indicated browsable counter
`browsableValue27`	browsableValue27	value of the indicated browsable counter
`browsableValue28`	browsableValue28	value of the indicated browsable counter
`browsableValue29`	browsableValue29	value of the indicated browsable counter
`browsableValue30`	browsableValue30	value of the indicated browsable counter
`_usr`	Username	Enter the Username for Db2
`_pwd`	Password	Enter the Password for Db2
`_browseName1`	_browseName1	ID number assigned to the indicated browsable counter number
`_browseNameid1`	_browseNameid1	ID number assigned to the indicated browsable counter number
`_instance`	Node Name	Enter the Node Name for Db2
`_browseNameid2`	_browseNameid2	ID number assigned to the indicated browsable counter number
`_browseName2`	_browseName2	ID number assigned to the indicated browsable counter number
`_browseNameid3`	_browseNameid3	ID number assigned to the indicated browsable counter number
`_browseName3`	_browseName3	ID number assigned to the indicated browsable counter number
`_browseNameid4`	_browseNameid4	ID number assigned to the indicated browsable counter number
`_browseName4`	_browseName4	ID number assigned to the indicated browsable counter number
`_browseNameid5`	_browseNameid5	ID number assigned to the indicated browsable counter number
`_browseName5`	_browseName5	ID number assigned to the indicated browsable counter number
`_browseNameid6`	_browseNameid6	ID number assigned to the indicated browsable counter number
`_browseName6`	_browseName6	ID number assigned to the indicated browsable counter number
`_browseNameid7`	_browseNameid7	ID number assigned to the indicated browsable counter number
`_browseName7`	_browseName7	ID number assigned to the indicated browsable counter number
`_browseNameid8`	_browseNameid8	ID number assigned to the indicated browsable counter number
`_browseName8`	_browseName8	ID number assigned to the indicated browsable counter number
`_browseNameid9`	_browseNameid9	ID number assigned to the indicated browsable counter number
`_browseName9`	_browseName9	ID number assigned to the indicated browsable counter number
`_browseNameid10`	_browseNameid10	ID number assigned to the indicated browsable counter number
`_browseName10`	_browseName10	ID number assigned to the indicated browsable counter number
`_browseNameid11`	_browseNameid11	ID number assigned to the indicated browsable counter number
`_browseName11`	_browseName11	ID number assigned to the indicated browsable counter number
`_browseName12`	_browseName12	ID number assigned to the indicated browsable counter number
`_browseNameid12`	_browseNameid12	ID number assigned to the indicated browsable counter number
`_browseNameid13`	_browseNameid13	ID number assigned to the indicated browsable counter number
`_browseName13`	_browseName13	ID number assigned to the indicated browsable counter number
`_browseName14`	_browseName14	ID number assigned to the indicated browsable counter number
`_browseNameid14`	_browseNameid14	ID number assigned to the indicated browsable counter number
`_browseName15`	_browseName15	ID number assigned to the indicated browsable counter number
`_browseNameid15`	_browseNameid15	ID number assigned to the indicated browsable counter number
`_browseName16`	_browseName16	ID number assigned to the indicated browsable counter number
`_browseNameid16`	_browseNameid16	ID number assigned to the indicated browsable counter number
`_browseName17`	_browseName17	ID number assigned to the indicated browsable counter number
`_browseNameid17`	_browseNameid17	ID number assigned to the indicated browsable counter number
`_browseName18`	_browseName18	ID number assigned to the indicated browsable counter number
`_browseNameid18`	_browseNameid18	ID number assigned to the indicated browsable counter number
`_browseName19`	_browseName19	ID number assigned to the indicated browsable counter number
`_browseNameid19`	_browseNameid19	ID number assigned to the indicated browsable counter number
`_browseNameid20`	_browseNameid20	ID number assigned to the indicated browsable counter number
`_browseName20`	_browseName20	ID number assigned to the indicated browsable counter number
`_browseNameid21`	_browseNameid21	ID number assigned to the indicated browsable counter number
`_browseName21`	_browseName21	ID number assigned to the indicated browsable counter number
`_browseNameid22`	_browseNameid22	ID number assigned to the indicated browsable counter number
`_browseName22`	_browseName22	ID number assigned to the indicated browsable counter number
`_browseNameid23`	_browseNameid23	ID number assigned to the indicated browsable counter number
`_browseName23`	_browseName23	ID number assigned to the indicated browsable counter number
`_browseNameid24`	_browseNameid24	ID number assigned to the indicated browsable counter number
`_browseName24`	_browseName24	ID number assigned to the indicated browsable counter number
`_browseNameid25`	_browseNameid25	ID number assigned to the indicated browsable counter number
`_browseName25`	_browseName25	ID number assigned to the indicated browsable counter number
`_browseName26`	_browseName26	ID number assigned to the indicated browsable counter number
`_browseNameid26`	_browseNameid26	ID number assigned to the indicated browsable counter number
`_browseNameid27`	_browseNameid27	ID number assigned to the indicated browsable counter number
`_browseName27`	_browseName27	ID number assigned to the indicated browsable counter number
`_browseNameid28`	_browseNameid28	ID number assigned to the indicated browsable counter number
`_browseName28`	_browseName28	ID number assigned to the indicated browsable counter number
`_browseNameid29`	_browseNameid29	ID number assigned to the indicated browsable counter number
`_browseName29`	_browseName29	ID number assigned to the indicated browsable counter number
`_browseName30`	_browseName30	ID number assigned to the indicated browsable counter number
`_browseNameid30`	_browseNameid30	ID number assigned to the indicated browsable counter number
`_browse`	Counters	Current selection of counters.
`_server`	Server	DB2 server name.
`_frequency`	Update every	amount of time between checks of a monitor
`_name`	Title	title that should appear in the Monitor table (optional)
`_disabled`	Disable	temporarily disable monitor sampling and alerting
`_verifyError`	Verify Error	if the monitor detects an error, immediately perform the check again to verify the error.
`_errorFrequency`	Update every (on errors)	the amount of time between checks whenever the status of the monitor is not ok; the Update value from above is used if this is left blank
`_schedule`	Schedule	schedule for the monitor to be enabled - for example, "weekdays, 9-6" enables the monitor to run from 9am to 6pm, Monday - Friday
`_notLogToTopaz`	Stop Logging To Mercury Application Management	Check this box to not log the data for this monitor to Mercury Application Management
`_monitorDescription`	Monitor Description	additional description of monitor that appears on Monitor Detail page (optional)
`_onlyStatusChanges`	_onlyStatusChanges	state of the indicated configuration option
`_description`	Report Description	additional description of monitor that appears on Reports and in monitor popup info (optional)
`_logOnlyThresholdMeas`	_logOnlyThresholdMeas	state of the indicated configuration option
`_logOnlyMonitorData`	_logOnlyMonitorData	state of the indicated configuration option
`__template`	Monitor Template	monitor template to use for this monitor
`_dependsOn`	Depends On	Choose the monitor that this monitor depends on
`_dependsCondition`	Depends Condition	If OK, this monitor is only enabled if the Depends On monitor is OK.

Monitor Type: DHCP


name	label	description
`leasedAddress`	Leased IP Address	value of the indicated measurement
`status`	status	most recent status of the monitor
`statusText`	statusText	most recent status of the monitor
`roundTripTime`	round trip time	most recent round trip time reported
`_timeout`	Timeout	The amount of time, in seconds, to wait for a response from a DHCP server
`_frequency`	Update every	amount of time between checks of a monitor
`_name`	Title	title that should appear in the Monitor table (optional)
`_disabled`	Disable	temporarily disable monitor sampling and alerting
`_requestAddress`	Requested Client Address	(Optional) The IP Address to request from the DHCP Server
`_verifyError`	Verify Error	if the monitor detects an error, immediately perform the check again to verify the error.
`_errorFrequency`	Update every (on errors)	the amount of time between checks whenever the status of the monitor is not ok; the Update value from above is used if this is left blank
`_notLogToTopaz`	Stop Logging To Mercury Application Management	Check this box to not log the data for this monitor to Mercury Application Management
`_schedule`	Schedule	schedule for the monitor to be enabled - for example, "weekdays, 9-6" enables the monitor to run from 9am to 6pm, Monday - Friday
`_onlyStatusChanges`	_onlyStatusChanges	state of the indicated configuration option
`_monitorDescription`	Monitor Description	additional description of monitor that appears on Monitor Detail page (optional)
`_description`	Report Description	additional description of monitor that appears on Reports and in monitor popup info (optional)
`_logOnlyThresholdMeas`	_logOnlyThresholdMeas	state of the indicated configuration option
`_logOnlyMonitorData`	_logOnlyMonitorData	state of the indicated configuration option
`__template`	Monitor Template	monitor template to use for this monitor
`_dependsOn`	Depends On	Choose the monitor that this monitor depends on
`_dependsCondition`	Depends Condition	If OK, this monitor is only enabled if the Depends On monitor is OK.

Monitor Type: Directory


name	label	description
`age`	time since modified	most recent time since modified reported
`permitted`	access permitted	most recent access permitted reported
`fileCount`	number of files	most recent number of files reported
`exists`	directory exists	most recent directory exists reported
`_path`	Directory Path	Full path or UNC name of directory (example: c:\firstdir\seconddir). Optionally, use a regular expression to insert date and time variables (e.g.s/C:\firstdir\$shortYear$$0month$$0day$/)
`_frequency`	Update every	amount of time between checks of a monitor
`_name`	Title	title that should appear in the Monitor table (optional)
`_disabled`	Disable	temporarily disable monitor sampling and alerting
`_noRecurse`	No Subdirectories	check this if you do not want SiteScope to count files in subdirectories.
`_match`	File Name Match	use a substring or a regular expression to match - only file names that match will be counted.
`_verifyError`	Verify Error	if the monitor detects an error, immediately perform the check again to verify the error.
`_errorFrequency`	Update every (on errors)	the amount of time between checks whenever the status of the monitor is not ok; the Update value from above is used if this is left blank
`_notLogToTopaz`	Stop Logging To Mercury Application Management	Check this box to not log the data for this monitor to Mercury Application Management
`_schedule`	Schedule	schedule for the monitor to be enabled - for example, "weekdays, 9-6" enables the monitor to run from 9am to 6pm, Monday - Friday
`_onlyStatusChanges`	_onlyStatusChanges	state of the indicated configuration option
`_monitorDescription`	Monitor Description	additional description of monitor that appears on Monitor Detail page (optional)
`_logOnlyThresholdMeas`	_logOnlyThresholdMeas	state of the indicated configuration option
`_description`	Report Description	additional description of monitor that appears on Reports and in monitor popup info (optional)
`_logOnlyMonitorData`	_logOnlyMonitorData	state of the indicated configuration option
`__template`	Monitor Template	monitor template to use for this monitor
`_dependsOn`	Depends On	Choose the monitor that this monitor depends on
`_dependsCondition`	Depends Condition	If OK, this monitor is only enabled if the Depends On monitor is OK.

Monitor Type: Disk Space


name	label	description
`percentFull`	percent full	most recent percent full reported
`freeSpace`	MB free	most recent MB free reported
`remoteMachineName`	Remote Server	use this field instead of `_machine`, if you need the name of the remote machine to appear in the template
`_disk`	Disk	the local disk drive to be monitoredNOTE: If this field is blank, click here to trouble shoot the problem.
`_frequency`	Update every	amount of time between checks of a monitor
`_name`	Title	title that should appear in the Monitor table (optional)
`_disabled`	Disable	temporarily disable monitor sampling and alerting
`_verifyError`	Verify Error	if the monitor detects an error, immediately perform the check again to verify the error.
`_errorFrequency`	Update every (on errors)	the amount of time between checks whenever the status of the monitor is not ok; the Update value from above is used if this is left blank
`_notLogToTopaz`	Stop Logging To Mercury Application Management	Check this box to not log the data for this monitor to Mercury Application Management
`_schedule`	Schedule	schedule for the monitor to be enabled - for example, "weekdays, 9-6" enables the monitor to run from 9am to 6pm, Monday - Friday
`_onlyStatusChanges`	_onlyStatusChanges	state of the indicated configuration option
`_monitorDescription`	Monitor Description	additional description of monitor that appears on Monitor Detail page (optional)
`_description`	Report Description	additional description of monitor that appears on Reports and in monitor popup info (optional)
`_logOnlyThresholdMeas`	_logOnlyThresholdMeas	state of the indicated configuration option
`_logOnlyMonitorData`	_logOnlyMonitorData	state of the indicated configuration option
`__template`	Monitor Template	monitor template to use for this monitor
`_dependsOn`	Depends On	Choose the monitor that this monitor depends on
`_dependsCondition`	Depends Condition	If OK, this monitor is only enabled if the Depends On monitor is OK.

Monitor Type: DNS


name	label	description
`status`	status	most recent status of the monitor
`statusText`	statusText	most recent status of the monitor
`roundTripTime`	round trip time	most recent round trip time reported
`_server`	DNS Server Address	IP address of the DNS server (example: 206.168.191.1)
`_hostname`	Host Name	the hostname to lookup (example: demo.sitescope.com)
`_frequency`	Update every	amount of time between checks of a monitor
`_name`	Title	title that should appear in the Monitor table (optional)
`_disabled`	Disable	temporarily disable monitor sampling and alerting
`_content`	Host Address	optional IP address or list of addresses to verify against for the hostname (examples 206.168.191.21 or 206.168.191.21,206.168.191.46)
`_verifyError`	Verify Error	if the monitor detects an error, immediately perform the check again to verify the error.
`_errorFrequency`	Update every (on errors)	the amount of time between checks whenever the status of the monitor is not ok; the Update value from above is used if this is left blank
`_notLogToTopaz`	Stop Logging To Mercury Application Management	Check this box to not log the data for this monitor to Mercury Application Management
`_schedule`	Schedule	schedule for the monitor to be enabled - for example, "weekdays, 9-6" enables the monitor to run from 9am to 6pm, Monday - Friday
`_onlyStatusChanges`	_onlyStatusChanges	state of the indicated configuration option
`_monitorDescription`	Monitor Description	additional description of monitor that appears on Monitor Detail page (optional)
`_logOnlyThresholdMeas`	_logOnlyThresholdMeas	state of the indicated configuration option
`_description`	Report Description	additional description of monitor that appears on Reports and in monitor popup info (optional)
`_logOnlyMonitorData`	_logOnlyMonitorData	state of the indicated configuration option
`__template`	Monitor Template	monitor template to use for this monitor
`_dependsOn`	Depends On	Choose the monitor that this monitor depends on
`_dependsCondition`	Depends Condition	If OK, this monitor is only enabled if the Depends On monitor is OK.

Monitor Type: Dynamo Application Server


name	label	description
`value0`	Counter 1 Value	value of the indicated counter
`value1`	Counter 2 Value	value of the indicated counter
`value2`	Counter 3 Value	value of the indicated counter
`value3`	Counter 4 Value	value of the indicated counter
`value4`	Counter 5 Value	value of the indicated counter
`value5`	Counter 6 Value	value of the indicated counter
`value6`	Counter 7 Value	value of the indicated counter
`value7`	Counter 8 Value	value of the indicated counter
`value8`	Counter 9 Value	value of the indicated counter
`value9`	Counter 10 Value	value of the indicated counter
`_counters`	Counters	the current selection of counterschoose counters
`_host`	Host Name	the IP address or host name of the Dynamo Server to be monitored, default port is :8870
`_index`	Index	the index of the SNMP object - for non-table object IDs, this is 0
`_community`	Community	Community for the SNMP object
`_frequency`	Update every	amount of time between checks of a monitor
`_name`	Title	title that should appear in the Monitor table (optional)
`_disabled`	Disable	temporarily disable monitor sampling and alerting
`_retryDelay`	Retry Delay	the time, in seconds, to wait before retrying the request
`_timeout`	Timeout	the total time, in seconds, to wait for a successful reply
`_verifyError`	Verify Error	if the monitor detects an error, immediately perform the check again to verify the error.
`_errorFrequency`	Update every (on errors)	the amount of time between checks whenever the status of the monitor is not ok; the Update value from above is used if this is left blank
`_notLogToTopaz`	Stop Logging To Mercury Application Management	Check this box to not log the data for this monitor to Mercury Application Management
`_schedule`	Schedule	schedule for the monitor to be enabled - for example, "weekdays, 9-6" enables the monitor to run from 9am to 6pm, Monday - Friday
`_onlyStatusChanges`	_onlyStatusChanges	state of the indicated configuration option
`_monitorDescription`	Monitor Description	additional description of monitor that appears on Monitor Detail page (optional)
`_logOnlyThresholdMeas`	_logOnlyThresholdMeas	state of the indicated configuration option
`_description`	Report Description	additional description of monitor that appears on Reports and in monitor popup info (optional)
`_logOnlyMonitorData`	_logOnlyMonitorData	state of the indicated configuration option
`__template`	Monitor Template	monitor template to use for this monitor
`_dependsOn`	Depends On	Choose the monitor that this monitor depends on
`_dependsCondition`	Depends Condition	If OK, this monitor is only enabled if the Depends On monitor is OK.

Monitor Type: eBusiness Chain


name	label	description
`percentGood`	% items OK	most recent % items OK reported
`itemsInError`	items in error	most recent items in error reported
`nameItemsInError`	name of the items in error	most recent name of the items in error reported
`nameItemsInWarning`	name of the items in warning	most recent name of the items in warning reported
`_item`	Items	select one or more groups and/or monitors that will be checked
`_frequency`	Update every	amount of time between checks of a monitor
`_name`	Title	title that should appear in the Monitor table (optional)
`_disabled`	Disable	temporarily disable monitor sampling and alerting
`_whenError`	When Error	Follow this rule if a monitor enounters an error.
`_singleSession`	Single Session	Run all monitors in a single session - if this box is checked then URL monitors use the same set of cookies and the same connection to the server.
`_delay`	Monitor Delay	Delay in seconds between monitors
`_verifyError`	Verify Error	if the monitor detects an error, immediately perform the check again to verify the error.
`_errorFrequency`	Update every (on errors)	the amount of time between checks whenever the status of the monitor is not ok; the Update value from above is used if this is left blank
`_notLogToTopaz`	Stop Logging To Mercury Application Management	Check this box to not log the data for this monitor to Mercury Application Management
`_schedule`	Schedule	schedule for the monitor to be enabled - for example, "weekdays, 9-6" enables the monitor to run from 9am to 6pm, Monday - Friday
`_onlyStatusChanges`	_onlyStatusChanges	state of the indicated configuration option
`_monitorDescription`	Monitor Description	additional description of monitor that appears on Monitor Detail page (optional)
`_logOnlyThresholdMeas`	_logOnlyThresholdMeas	state of the indicated configuration option
`_description`	Report Description	additional description of monitor that appears on Reports and in monitor popup info (optional)
`_logOnlyMonitorData`	_logOnlyMonitorData	state of the indicated configuration option
`__template`	Monitor Template	monitor template to use for this monitor
`_dependsOn`	Depends On	Choose the monitor that this monitor depends on
`_dependsCondition`	Depends Condition	If OK, this monitor is only enabled if the Depends On monitor is OK.

Monitor Type: F5 Big-IP


name	label	description
`browsableValue2`	browsableValue2	value of the indicated browsable counter
`browsableValue3`	browsableValue3	value of the indicated browsable counter
`browsableValue4`	browsableValue4	value of the indicated browsable counter
`browsableValue5`	browsableValue5	value of the indicated browsable counter
`browsableValue6`	browsableValue6	value of the indicated browsable counter
`browsableValue7`	browsableValue7	value of the indicated browsable counter
`browsableValue8`	browsableValue8	value of the indicated browsable counter
`browsableValue9`	browsableValue9	value of the indicated browsable counter
`browsableValue10`	browsableValue10	value of the indicated browsable counter
`_server`	Server	the IP address or host name of the agent
`_mibfile`	MIB File	the MIB file from which this monitor should read OIDs
`_snmpversion`	SNMP Version	the version of SNMP to use when requesting data from the server
`_community`	V1/V2 Community	the community for the SNMP agent for SNMP V1/V2 only
`_browseNameid1`	_browseNameid1	ID number assigned to the indicated browsable counter number
`_browseName1`	_browseName1	ID number assigned to the indicated browsable counter number
`_snmpv3authtype`	SNMP V3 Authentication Type	Type of authentication to be used for SNMP V3 only
`_browseNameid2`	_browseNameid2	ID number assigned to the indicated browsable counter number
`_browseName2`	_browseName2	ID number assigned to the indicated browsable counter number
`_browseNameid3`	_browseNameid3	ID number assigned to the indicated browsable counter number
`_browseName3`	_browseName3	ID number assigned to the indicated browsable counter number
`_snmpv3username`	SNMP V3 Username	Username to be used for authentication for SNMP V3 only
`_browseNameid4`	_browseNameid4	ID number assigned to the indicated browsable counter number
`_browseName4`	_browseName4	ID number assigned to the indicated browsable counter number
`_snmpv3authpassword`	SNMP V3 Authentication Password	Password to be used for authentication for SNMP V3 only
`_browseNameid5`	_browseNameid5	ID number assigned to the indicated browsable counter number
`_browseName5`	_browseName5	ID number assigned to the indicated browsable counter number
`_snmpv3privpassword`	SNMP V3 Privacy Password	Password to be used for DES privacy for SNMP V3 only
`_browseName6`	_browseName6	ID number assigned to the indicated browsable counter number
`_contextEngineID`	SNMP V3 Context Engine ID	a hexidecimal string representing the Context Engine ID to use for this connection for SNMP V3 only
`_browseNameid6`	_browseNameid6	ID number assigned to the indicated browsable counter number
`_contextName`	SNMP V3 Context Name	the Context Name to use for this connection for SNMP V3 only
`_browseName7`	_browseName7	ID number assigned to the indicated browsable counter number
`_browseNameid7`	_browseNameid7	ID number assigned to the indicated browsable counter number
`_browseName8`	_browseName8	ID number assigned to the indicated browsable counter number
`_browseNameid8`	_browseNameid8	ID number assigned to the indicated browsable counter number
`_browseName9`	_browseName9	ID number assigned to the indicated browsable counter number
`_browseNameid9`	_browseNameid9	ID number assigned to the indicated browsable counter number
`_browseNameid10`	_browseNameid10	ID number assigned to the indicated browsable counter number
`_browseName10`	_browseName10	ID number assigned to the indicated browsable counter number
`_browse`	Counters	Current selection of counters.
`_frequency`	Update every	amount of time between checks of a monitor
`_name`	Title	title that should appear in the Monitor table (optional)
`_disabled`	Disable	temporarily disable monitor sampling and alerting
`_timeout`	Timeout	the time in seconds to wait for all requests to complete (including retries)
`_retries`	Retries	the number of times to retry a request that has timed out
`_port`	Port	the port number on which to query the SNMP agent
`_counterCalculationMode`	Counter Calculation Mode	choose a calculation to perform on objects of type Counter, Counter32, or Counter64
`_verifyError`	Verify Error	if the monitor detects an error, immediately perform the check again to verify the error.
`_errorFrequency`	Update every (on errors)	the amount of time between checks whenever the status of the monitor is not ok; the Update value from above is used if this is left blank
`_notLogToTopaz`	Stop Logging To Mercury Application Management	Check this box to not log the data for this monitor to Mercury Application Management
`_schedule`	Schedule	schedule for the monitor to be enabled - for example, "weekdays, 9-6" enables the monitor to run from 9am to 6pm, Monday - Friday
`_onlyStatusChanges`	_onlyStatusChanges	state of the indicated configuration option
`_monitorDescription`	Monitor Description	additional description of monitor that appears on Monitor Detail page (optional)
`_logOnlyThresholdMeas`	_logOnlyThresholdMeas	state of the indicated configuration option
`_description`	Report Description	additional description of monitor that appears on Reports and in monitor popup info (optional)
`_logOnlyMonitorData`	_logOnlyMonitorData	state of the indicated configuration option
`__template`	Monitor Template	monitor template to use for this monitor
`_dependsOn`	Depends On	Choose the monitor that this monitor depends on
`_dependsCondition`	Depends Condition	If OK, this monitor is only enabled if the Depends On monitor is OK.

Monitor Type: File


name	label	description
`lastCheckContentTime`	lastCheckContentTime	value of the indicated measurement
`status`	status	most recent status of the monitor
`lastChecksum`	lastChecksum	value of the indicated measurement
`age`	file age	most recent file age reported
`size`	size	most recent size reported
`matchValue`	content match	most recent content match reported
`_filename`	File Name	Enter the full path or UNC name of the file (e.g. e:\mydir\myfile.log). Optionally, use a regular expression to insert date and time variables (e.g s/C:\firstdir\$shortYear$$0month$$0day$/)
`_frequency`	Update every	amount of time between checks of a monitor
`_name`	Title	title that should appear in the Monitor table (optional)
`_disabled`	Disable	temporarily disable monitor sampling and alerting
`_content`	Match Content	optional text to match against content of the file. By default successful match makes monitor good.
`_checkContent`	Check for Content Changes	generate error if the content of the file changes - resetting the saved contents updates the contents checked against during the next monitor run
`_noFileCheckExist`	No Error on File Not Found. You MUST set the "Good if" condition to 'Status == 404'	if the file is not found then don't error.
`_verifyError`	Verify Error	if the monitor detects an error, immediately perform the check again to verify the error.
`_errorFrequency`	Update every (on errors)	the amount of time between checks whenever the status of the monitor is not ok; the Update value from above is used if this is left blank
`_notLogToTopaz`	Stop Logging To Mercury Application Management	Check this box to not log the data for this monitor to Mercury Application Management
`_schedule`	Schedule	schedule for the monitor to be enabled - for example, "weekdays, 9-6" enables the monitor to run from 9am to 6pm, Monday - Friday
`_onlyStatusChanges`	_onlyStatusChanges	state of the indicated configuration option
`_monitorDescription`	Monitor Description	additional description of monitor that appears on Monitor Detail page (optional)
`_logOnlyThresholdMeas`	_logOnlyThresholdMeas	state of the indicated configuration option
`_description`	Report Description	additional description of monitor that appears on Reports and in monitor popup info (optional)
`_logOnlyMonitorData`	_logOnlyMonitorData	state of the indicated configuration option
`__template`	Monitor Template	monitor template to use for this monitor
`_dependsOn`	Depends On	Choose the monitor that this monitor depends on
`_dependsCondition`	Depends Condition	If OK, this monitor is only enabled if the Depends On monitor is OK.

Monitor Type: FTP


name	label	description
`lastCheckContentTime`	lastCheckContentTime	value of the indicated measurement
`status`	status	most recent status of the monitor
`lastCheckContentSize`	lastCheckContentSize	value of the indicated measurement
`lastChecksum`	lastChecksum	value of the indicated measurement
`lastBufferSize`	lastBufferSize	value of the indicated measurement
`size`	size	value of the indicated measurement
`matchValue`	match value	value of the indicated measurement
`roundTripTime`	round trip time	most recent round trip time reported
`_server`	FTP Server	the IP address or host name of the FTP server (examples: 206.168.191.10, or ftp.sitescope.com or to specify a different port, ftp.sitescope.com:89)
`_filename`	File	the file to retrieve from the FTP server (example: /pub/file.txt) Optionally, use a regular expression to insert date and time variables (e.g s/C:\firstdir\$shortYear$$0month$$0day$/)
`_username`	User Name	user name for the FTP server (i.e. Anonymous)
`_password`	Password	password for the FTP server (i.e. user@server.com)
`_frequency`	Update every	amount of time between checks of a monitor
`_name`	Title	title that should appear in the Monitor table (optional)
`_disabled`	Disable	temporarily disable monitor sampling and alerting
`_timeout`	Timeout	the time out, seconds, to wait for the file to be retrieved
`_proxy`	FTP Proxy	optional proxy server to use including port (example: proxy.sitescope.com:8080)
`_passive`	Passive Mode	use FTP's passive mode (if not using a proxy) - passive mode usually allows FTP to work through firewalls.
`_content`	Match Content	optional text to match against content of the file
`_checkContent`	Check for Content Changes	generate error if the content of the file changes - resetting the saved contents updates the contents checked against during the next monitor run
`_proxyusername`	Proxy Server User Name	optional user name if the proxy server requires authorization
`_proxypassword`	Proxy Server Password	optional password if the proxy server requires authorization
`_verifyError`	Verify Error	if the monitor detects an error, immediately perform the check again to verify the error.
`_errorFrequency`	Update every (on errors)	the amount of time between checks whenever the status of the monitor is not ok; the Update value from above is used if this is left blank
`_notLogToTopaz`	Stop Logging To Mercury Application Management	Check this box to not log the data for this monitor to Mercury Application Management
`_schedule`	Schedule	schedule for the monitor to be enabled - for example, "weekdays, 9-6" enables the monitor to run from 9am to 6pm, Monday - Friday
`_onlyStatusChanges`	_onlyStatusChanges	state of the indicated configuration option
`_monitorDescription`	Monitor Description	additional description of monitor that appears on Monitor Detail page (optional)
`_logOnlyThresholdMeas`	_logOnlyThresholdMeas	state of the indicated configuration option
`_description`	Report Description	additional description of monitor that appears on Reports and in monitor popup info (optional)
`_logOnlyMonitorData`	_logOnlyMonitorData	state of the indicated configuration option
`__template`	Monitor Template	monitor template to use for this monitor
`_dependsOn`	Depends On	Choose the monitor that this monitor depends on
`_dependsCondition`	Depends Condition	If OK, this monitor is only enabled if the Depends On monitor is OK.

Monitor Type: Health of SiteScope Server


name	label	description
`status`	status	most recent status of the monitor
`browsableValue2`	browsableValue2	value of the indicated browsable counter
`browsableValue3`	browsableValue3	value of the indicated browsable counter
`browsableValue4`	browsableValue4	value of the indicated browsable counter
`browsableValue5`	browsableValue5	value of the indicated browsable counter
`browsableValue6`	browsableValue6	value of the indicated browsable counter
`browsableValue7`	browsableValue7	value of the indicated browsable counter
`browsableValue8`	browsableValue8	value of the indicated browsable counter
`browsableValue9`	browsableValue9	value of the indicated browsable counter
`browsableValue10`	browsableValue10	value of the indicated browsable counter
`browsableValue11`	browsableValue11	value of the indicated browsable counter
`browsableValue12`	browsableValue12	value of the indicated browsable counter
`browsableValue13`	browsableValue13	value of the indicated browsable counter
`browsableValue14`	browsableValue14	value of the indicated browsable counter
`browsableValue15`	browsableValue15	value of the indicated browsable counter
`browsableValue16`	browsableValue16	value of the indicated browsable counter
`browsableValue17`	browsableValue17	value of the indicated browsable counter
`browsableValue18`	browsableValue18	value of the indicated browsable counter
`browsableValue19`	browsableValue19	value of the indicated browsable counter
`browsableValue20`	browsableValue20	value of the indicated browsable counter
`browsableValue21`	browsableValue21	value of the indicated browsable counter
`browsableValue22`	browsableValue22	value of the indicated browsable counter
`browsableValue23`	browsableValue23	value of the indicated browsable counter
`browsableValue24`	browsableValue24	value of the indicated browsable counter
`browsableValue25`	browsableValue25	value of the indicated browsable counter
`browsableValue26`	browsableValue26	value of the indicated browsable counter
`browsableValue27`	browsableValue27	value of the indicated browsable counter
`browsableValue28`	browsableValue28	value of the indicated browsable counter
`browsableValue29`	browsableValue29	value of the indicated browsable counter
`browsableValue30`	browsableValue30	value of the indicated browsable counter
`browsableValue31`	browsableValue31	value of the indicated browsable counter
`browsableValue32`	browsableValue32	value of the indicated browsable counter
`browsableValue33`	browsableValue33	value of the indicated browsable counter
`browsableValue34`	browsableValue34	value of the indicated browsable counter
`browsableValue35`	browsableValue35	value of the indicated browsable counter
`browsableValue36`	browsableValue36	value of the indicated browsable counter
`browsableValue37`	browsableValue37	value of the indicated browsable counter
`browsableValue38`	browsableValue38	value of the indicated browsable counter
`browsableValue39`	browsableValue39	value of the indicated browsable counter
`browsableValue40`	browsableValue40	value of the indicated browsable counter
`_server`	Server
`_xmlfile`	Counter File	a Performance Monitor setting file that specifies the counters (from templates.perfmon\browsable directory)
`_browseNameid1`	_browseNameid1	ID number assigned to the indicated browsable counter number
`_browseName1`	_browseName1	ID number assigned to the indicated browsable counter number
`_browseNameid2`	_browseNameid2	ID number assigned to the indicated browsable counter number
`_browseName2`	_browseName2	ID number assigned to the indicated browsable counter number
`_browseNameid3`	_browseNameid3	ID number assigned to the indicated browsable counter number
`_browseName3`	_browseName3	ID number assigned to the indicated browsable counter number
`_browseNameid4`	_browseNameid4	ID number assigned to the indicated browsable counter number
`_browseName4`	_browseName4	ID number assigned to the indicated browsable counter number
`_browseNameid5`	_browseNameid5	ID number assigned to the indicated browsable counter number
`_browseName5`	_browseName5	ID number assigned to the indicated browsable counter number
`_browseName6`	_browseName6	ID number assigned to the indicated browsable counter number
`_browseNameid6`	_browseNameid6	ID number assigned to the indicated browsable counter number
`_browseNameid7`	_browseNameid7	ID number assigned to the indicated browsable counter number
`_browseName7`	_browseName7	ID number assigned to the indicated browsable counter number
`_browseNameid8`	_browseNameid8	ID number assigned to the indicated browsable counter number
`_browseName8`	_browseName8	ID number assigned to the indicated browsable counter number
`_browseNameid9`	_browseNameid9	ID number assigned to the indicated browsable counter number
`_browseName9`	_browseName9	ID number assigned to the indicated browsable counter number
`_browseName10`	_browseName10	ID number assigned to the indicated browsable counter number
`_browseNameid10`	_browseNameid10	ID number assigned to the indicated browsable counter number
`_browseName11`	_browseName11	ID number assigned to the indicated browsable counter number
`_browseNameid11`	_browseNameid11	ID number assigned to the indicated browsable counter number
`_browseNameid12`	_browseNameid12	ID number assigned to the indicated browsable counter number
`_browseName12`	_browseName12	ID number assigned to the indicated browsable counter number
`_browseName13`	_browseName13	ID number assigned to the indicated browsable counter number
`_browseNameid13`	_browseNameid13	ID number assigned to the indicated browsable counter number
`_browseName14`	_browseName14	ID number assigned to the indicated browsable counter number
`_browseNameid14`	_browseNameid14	ID number assigned to the indicated browsable counter number
`_browseName15`	_browseName15	ID number assigned to the indicated browsable counter number
`_browseNameid15`	_browseNameid15	ID number assigned to the indicated browsable counter number
`_browseName16`	_browseName16	ID number assigned to the indicated browsable counter number
`_browseNameid16`	_browseNameid16	ID number assigned to the indicated browsable counter number
`_browseNameid17`	_browseNameid17	ID number assigned to the indicated browsable counter number
`_browseName17`	_browseName17	ID number assigned to the indicated browsable counter number
`_browseName18`	_browseName18	ID number assigned to the indicated browsable counter number
`_browseNameid18`	_browseNameid18	ID number assigned to the indicated browsable counter number
`_browseNameid19`	_browseNameid19	ID number assigned to the indicated browsable counter number
`_browseName19`	_browseName19	ID number assigned to the indicated browsable counter number
`_browseNameid20`	_browseNameid20	ID number assigned to the indicated browsable counter number
`_browseName20`	_browseName20	ID number assigned to the indicated browsable counter number
`_browseNameid21`	_browseNameid21	ID number assigned to the indicated browsable counter number
`_browseName21`	_browseName21	ID number assigned to the indicated browsable counter number
`_browseName22`	_browseName22	ID number assigned to the indicated browsable counter number
`_browseNameid22`	_browseNameid22	ID number assigned to the indicated browsable counter number
`_browseNameid23`	_browseNameid23	ID number assigned to the indicated browsable counter number
`_browseName23`	_browseName23	ID number assigned to the indicated browsable counter number
`_browseName24`	_browseName24	ID number assigned to the indicated browsable counter number
`_browseNameid24`	_browseNameid24	ID number assigned to the indicated browsable counter number
`_browseName25`	_browseName25	ID number assigned to the indicated browsable counter number
`_browseNameid25`	_browseNameid25	ID number assigned to the indicated browsable counter number
`_browseName26`	_browseName26	ID number assigned to the indicated browsable counter number
`_browseNameid26`	_browseNameid26	ID number assigned to the indicated browsable counter number
`_browseName27`	_browseName27	ID number assigned to the indicated browsable counter number
`_browseNameid27`	_browseNameid27	ID number assigned to the indicated browsable counter number
`_browseName28`	_browseName28	ID number assigned to the indicated browsable counter number
`_browseNameid28`	_browseNameid28	ID number assigned to the indicated browsable counter number
`_browseNameid29`	_browseNameid29	ID number assigned to the indicated browsable counter number
`_browseName29`	_browseName29	ID number assigned to the indicated browsable counter number
`_browseNameid30`	_browseNameid30	ID number assigned to the indicated browsable counter number
`_browseName30`	_browseName30	ID number assigned to the indicated browsable counter number
`_browseNameid31`	_browseNameid31	ID number assigned to the indicated browsable counter number
`_browseName31`	_browseName31	ID number assigned to the indicated browsable counter number
`_browseName32`	_browseName32	ID number assigned to the indicated browsable counter number
`_browseNameid32`	_browseNameid32	ID number assigned to the indicated browsable counter number
`_browseName33`	_browseName33	ID number assigned to the indicated browsable counter number
`_browseNameid33`	_browseNameid33	ID number assigned to the indicated browsable counter number
`_browseName34`	_browseName34	ID number assigned to the indicated browsable counter number
`_browseNameid34`	_browseNameid34	ID number assigned to the indicated browsable counter number
`_browseName35`	_browseName35	ID number assigned to the indicated browsable counter number
`_browseNameid35`	_browseNameid35	ID number assigned to the indicated browsable counter number
`_browseNameid36`	_browseNameid36	ID number assigned to the indicated browsable counter number
`_browseName36`	_browseName36	ID number assigned to the indicated browsable counter number
`_browseName37`	_browseName37	ID number assigned to the indicated browsable counter number
`_browseNameid37`	_browseNameid37	ID number assigned to the indicated browsable counter number
`_browseName38`	_browseName38	ID number assigned to the indicated browsable counter number
`_browseNameid38`	_browseNameid38	ID number assigned to the indicated browsable counter number
`_browseName39`	_browseName39	ID number assigned to the indicated browsable counter number
`_browseNameid39`	_browseNameid39	ID number assigned to the indicated browsable counter number
`_browseNameid40`	_browseNameid40	ID number assigned to the indicated browsable counter number
`_browseName40`	_browseName40	ID number assigned to the indicated browsable counter number
`_browse`	Counters	Current selection of counters.
`_frequency`	Update every	amount of time between checks of a monitor
`_name`	Title	title that should appear in the Monitor table (optional)
`_disabled`	Disable	temporarily disable monitor sampling and alerting
`_verifyError`	Verify Error	if the monitor detects an error, immediately perform the check again to verify the error.
`_errorFrequency`	Update every (on errors)	the amount of time between checks whenever the status of the monitor is not ok; the Update value from above is used if this is left blank
`_schedule`	Schedule	schedule for the monitor to be enabled - for example, "weekdays, 9-6" enables the monitor to run from 9am to 6pm, Monday - Friday
`_notLogToTopaz`	Stop Logging To Mercury Application Management	Check this box to not log the data for this monitor to Mercury Application Management
`_monitorDescription`	Monitor Description	additional description of monitor that appears on Monitor Detail page (optional)
`_onlyStatusChanges`	_onlyStatusChanges	state of the indicated configuration option
`_description`	Report Description	additional description of monitor that appears on Reports and in monitor popup info (optional)
`_logOnlyThresholdMeas`	_logOnlyThresholdMeas	state of the indicated configuration option
`_logOnlyMonitorData`	_logOnlyMonitorData	state of the indicated configuration option
`__template`	Monitor Template	monitor template to use for this monitor
`_dependsOn`	Depends On	Choose the monitor that this monitor depends on
`_dependsCondition`	Depends Condition	If OK, this monitor is only enabled if the Depends On monitor is OK.

Monitor Type: Health of SiteScope Server


name	label	description
`status`	status	most recent status of the monitor
`value0`	Counter 1 Value	value of the indicated counter
`value1`	Counter 2 Value	value of the indicated counter
`value2`	Counter 3 Value	value of the indicated counter
`value3`	Counter 4 Value	value of the indicated counter
`value4`	Counter 5 Value	value of the indicated counter
`value5`	Counter 6 Value	value of the indicated counter
`value6`	Counter 7 Value	value of the indicated counter
`value7`	Counter 8 Value	value of the indicated counter
`value8`	Counter 9 Value	value of the indicated counter
`value9`	Counter 10 Value	value of the indicated counter
`value10`	Counter 11 Value	value of the indicated counter
`value11`	Counter 12 Value	value of the indicated counter
`value12`	Counter 13 Value	value of the indicated counter
`value13`	Counter 14 Value	value of the indicated counter
`value14`	Counter 15 Value	value of the indicated counter
`value15`	Counter 16 Value	value of the indicated counter
`value16`	Counter 17 Value	value of the indicated counter
`value17`	Counter 18 Value	value of the indicated counter
`value18`	Counter 19 Value	value of the indicated counter
`value19`	Counter 20 Value	value of the indicated counter
`value20`	Counter 21 Value	value of the indicated counter
`value21`	Counter 22 Value	value of the indicated counter
`value22`	Counter 23 Value	value of the indicated counter
`value23`	Counter 24 Value	value of the indicated counter
`value24`	Counter 25 Value	value of the indicated counter
`value25`	Counter 26 Value	value of the indicated counter
`value26`	Counter 27 Value	value of the indicated counter
`value27`	Counter 28 Value	value of the indicated counter
`value28`	Counter 29 Value	value of the indicated counter
`value29`	Counter 30 Value	value of the indicated counter
`_counters`	Counters	the current selection of counterschoose counters
`_frequency`	Update every	amount of time between checks of a monitor
`_name`	Title	title that should appear in the Monitor table (optional)
`_disabled`	Disable	temporarily disable monitor sampling and alerting
`_verifyError`	Verify Error	if the monitor detects an error, immediately perform the check again to verify the error.
`_errorFrequency`	Update every (on errors)	the amount of time between checks whenever the status of the monitor is not ok; the Update value from above is used if this is left blank
`_schedule`	Schedule	schedule for the monitor to be enabled - for example, "weekdays, 9-6" enables the monitor to run from 9am to 6pm, Monday - Friday
`_notLogToTopaz`	Stop Logging To Mercury Application Management	Check this box to not log the data for this monitor to Mercury Application Management
`_monitorDescription`	Monitor Description	additional description of monitor that appears on Monitor Detail page (optional)
`_onlyStatusChanges`	_onlyStatusChanges	state of the indicated configuration option
`_description`	Report Description	additional description of monitor that appears on Reports and in monitor popup info (optional)
`_logOnlyThresholdMeas`	_logOnlyThresholdMeas	state of the indicated configuration option
`__template`	Monitor Template	monitor template to use for this monitor
`_logOnlyMonitorData`	_logOnlyMonitorData	state of the indicated configuration option
`_dependsOn`	Depends On	Choose the monitor that this monitor depends on
`_dependsCondition`	Depends Condition	If OK, this monitor is only enabled if the Depends On monitor is OK.

Monitor Type: History Health Monitor


name	label	description
`numErrors`	numErrors	most recent numErrors reported
`_frequency`	Update every	amount of time between checks of a monitor
`_name`	Title	title that should appear in the Monitor table (optional)
`_disabled`	Disable	temporarily disable monitor sampling and alerting
`_verifyError`	Verify Error	if the monitor detects an error, immediately perform the check again to verify the error.
`_errorFrequency`	Update every (on errors)	the amount of time between checks whenever the status of the monitor is not ok; the Update value from above is used if this is left blank
`_schedule`	Schedule	schedule for the monitor to be enabled - for example, "weekdays, 9-6" enables the monitor to run from 9am to 6pm, Monday - Friday
`_notLogToTopaz`	Stop Logging To Mercury Application Management	Check this box to not log the data for this monitor to Mercury Application Management
`_monitorDescription`	Monitor Description	additional description of monitor that appears on Monitor Detail page (optional)
`_onlyStatusChanges`	_onlyStatusChanges	state of the indicated configuration option
`_description`	Report Description	additional description of monitor that appears on Reports and in monitor popup info (optional)
`_logOnlyThresholdMeas`	_logOnlyThresholdMeas	state of the indicated configuration option
`__template`	Monitor Template	monitor template to use for this monitor
`_logOnlyMonitorData`	_logOnlyMonitorData	state of the indicated configuration option
`_dependsOn`	Depends On	Choose the monitor that this monitor depends on
`_dependsCondition`	Depends Condition	If OK, this monitor is only enabled if the Depends On monitor is OK.

Monitor Type: IIS Server


name	label	description
`value0`	Counter 1 Value	value of the indicated counter
`value1`	Counter 2 Value	value of the indicated counter
`value2`	Counter 3 Value	value of the indicated counter
`value3`	Counter 4 Value	value of the indicated counter
`value4`	Counter 5 Value	value of the indicated counter
`value5`	Counter 6 Value	value of the indicated counter
`value6`	Counter 7 Value	value of the indicated counter
`value7`	Counter 8 Value	value of the indicated counter
`value8`	Counter 9 Value	value of the indicated counter
`value9`	Counter 10 Value	value of the indicated counter
`value10`	Counter 11 Value	value of the indicated counter
`value11`	Counter 12 Value	value of the indicated counter
`value12`	Counter 13 Value	value of the indicated counter
`value13`	Counter 14 Value	value of the indicated counter
`value14`	Counter 15 Value	value of the indicated counter
`value15`	Counter 16 Value	value of the indicated counter
`value16`	Counter 17 Value	value of the indicated counter
`value17`	Counter 18 Value	value of the indicated counter
`value18`	Counter 19 Value	value of the indicated counter
`value19`	Counter 20 Value	value of the indicated counter
`_counters`	Counters	the current selection of counterschoose counters
`remoteMachineName`	Remote Server	use this field instead of `_machine`, if you need the name of the remote machine to appear in the template
`_frequency`	Update every	amount of time between checks of a monitor
`_name`	Title	title that should appear in the Monitor table (optional)
`_disabled`	Disable	temporarily disable monitor sampling and alerting
`_verifyError`	Verify Error	if the monitor detects an error, immediately perform the check again to verify the error.
`_errorFrequency`	Update every (on errors)	the amount of time between checks whenever the status of the monitor is not ok; the Update value from above is used if this is left blank
`_notLogToTopaz`	Stop Logging To Mercury Application Management	Check this box to not log the data for this monitor to Mercury Application Management
`_schedule`	Schedule	schedule for the monitor to be enabled - for example, "weekdays, 9-6" enables the monitor to run from 9am to 6pm, Monday - Friday
`_onlyStatusChanges`	_onlyStatusChanges	state of the indicated configuration option
`_monitorDescription`	Monitor Description	additional description of monitor that appears on Monitor Detail page (optional)
`_description`	Report Description	additional description of monitor that appears on Reports and in monitor popup info (optional)
`_logOnlyThresholdMeas`	_logOnlyThresholdMeas	state of the indicated configuration option
`_logOnlyMonitorData`	_logOnlyMonitorData	state of the indicated configuration option
`__template`	Monitor Template	monitor template to use for this monitor
`_dependsOn`	Depends On	Choose the monitor that this monitor depends on
`_dependsCondition`	Depends Condition	If OK, this monitor is only enabled if the Depends On monitor is OK.

Monitor Type: LDAP


name	label	description
`matchValue`	content match	value of the indicated measurement
`roundTripTime`	round trip time	most recent round trip time reported
`status`	status	most recent status reported
`_urlprovider`	LDAP service provider	the LDAP server to connect to (example: ldap://ldap.this-company.com:389
`_securityprincipal`	Security Principal	the LDAP query to perform (example: uid=testuser,ou=TEST, o=this-company.com)
`_password`	Security Credentials	the password used for authentication. If left blank it defaults to Anonymous.
`_frequency`	Update every	amount of time between checks of a monitor
`_name`	Title	title that should appear in the Monitor table (optional)
`_disabled`	Disable	temporarily disable monitor sampling and alerting
`_matchstring`	Content Match	optional, match against query result, using a string or a regular expression or XML names.
`_ldapquery`	Object Query	Be able to look at a separate object than the user dn object. This field has to be set if using a filter.
`_ldapfilter`	LDAP Filter	To be able to perform a search with filter
`_verifyError`	Verify Error	if the monitor detects an error, immediately perform the check again to verify the error.
`_errorFrequency`	Update every (on errors)	the amount of time between checks whenever the status of the monitor is not ok; the Update value from above is used if this is left blank
`_notLogToTopaz`	Stop Logging To Mercury Application Management	Check this box to not log the data for this monitor to Mercury Application Management
`_schedule`	Schedule	schedule for the monitor to be enabled - for example, "weekdays, 9-6" enables the monitor to run from 9am to 6pm, Monday - Friday
`_onlyStatusChanges`	_onlyStatusChanges	state of the indicated configuration option
`_monitorDescription`	Monitor Description	additional description of monitor that appears on Monitor Detail page (optional)
`_logOnlyThresholdMeas`	_logOnlyThresholdMeas	state of the indicated configuration option
`_description`	Report Description	additional description of monitor that appears on Reports and in monitor popup info (optional)
`_logOnlyMonitorData`	_logOnlyMonitorData	state of the indicated configuration option
`__template`	Monitor Template	monitor template to use for this monitor
`_dependsOn`	Depends On	Choose the monitor that this monitor depends on
`_dependsCondition`	Depends Condition	If OK, this monitor is only enabled if the Depends On monitor is OK.

Monitor Type: Link Check


name	label	description
`brokenLinks`	brokenLinks	value of the indicated measurement
`linkErrors`	link errors	most recent link errors reported
`links`	total links	most recent total links reported
`_url`	URL	the URL to start link checking from (example: http://demo.sitescope.com)
`_externalLinks`	Search External Links	when selected, search all links on each page, not just links with the original base URL.
`_frequency`	Update every	amount of time between checks of a monitor
`_name`	Title	title that should appear in the Monitor table (optional)
`_pause`	Pause	delay between checks, in milliseconds
`_disabled`	Disable	temporarily disable monitor sampling and alerting
`_maxLinks`	Maximum Links	the maximum number of links to check
`_maxSearchDepth`	Maximum Hops	the maximum "hops" from the start URL to check
`_report`	Summary Report	URL to summary report listing all the links checked
`_timeout`	Timeout	the time out, in seconds, to wait for the response
`_proxy`	HTTP Proxy	optional proxy server to use including port (example: proxy.sitescope.com:8080)
`_challengeResponse`	NT Challenge Response	when selected, use NT Challenge Response authorization
`_username`	Authorization User Name	optional user name if the URL requires authorization
`_password`	Authorization Password	optional password if the URL requires authorization
`_proxyusername`	Proxy Server User Name	optional user name if the proxy server requires authorization
`_proxypassword`	Proxy Server Password	optional password if the proxy server requires authorization
`_postData`	POST Data	optional name=value variables, one per line, to send with a POST request to the first URL checked
`_verifyError`	Verify Error	if the monitor detects an error, immediately perform the check again to verify the error.
`_errorFrequency`	Update every (on errors)	the amount of time between checks whenever the status of the monitor is not ok; the Update value from above is used if this is left blank
`_notLogToTopaz`	Stop Logging To Mercury Application Management	Check this box to not log the data for this monitor to Mercury Application Management
`_schedule`	Schedule	schedule for the monitor to be enabled - for example, "weekdays, 9-6" enables the monitor to run from 9am to 6pm, Monday - Friday
`_onlyStatusChanges`	_onlyStatusChanges	state of the indicated configuration option
`_monitorDescription`	Monitor Description	additional description of monitor that appears on Monitor Detail page (optional)
`_logOnlyThresholdMeas`	_logOnlyThresholdMeas	state of the indicated configuration option
`_description`	Report Description	additional description of monitor that appears on Reports and in monitor popup info (optional)
`_logOnlyMonitorData`	_logOnlyMonitorData	state of the indicated configuration option
`__template`	Monitor Template	monitor template to use for this monitor
`_dependsOn`	Depends On	Choose the monitor that this monitor depends on
`_dependsCondition`	Depends Condition	If OK, this monitor is only enabled if the Depends On monitor is OK.

Monitor Type: Log Event Health Monitor


name	label	description
`status`	status	most recent status of the monitor
`value0`	Counter 1 Value	value of the indicated counter
`value1`	Counter 2 Value	value of the indicated counter
`value2`	Counter 3 Value	value of the indicated counter
`value3`	Counter 4 Value	value of the indicated counter
`value4`	Counter 5 Value	value of the indicated counter
`value5`	Counter 6 Value	value of the indicated counter
`value6`	Counter 7 Value	value of the indicated counter
`value7`	Counter 8 Value	value of the indicated counter
`value8`	Counter 9 Value	value of the indicated counter
`value9`	Counter 10 Value	value of the indicated counter
`value10`	Counter 11 Value	value of the indicated counter
`value11`	Counter 12 Value	value of the indicated counter
`value12`	Counter 13 Value	value of the indicated counter
`value13`	Counter 14 Value	value of the indicated counter
`value14`	Counter 15 Value	value of the indicated counter
`value15`	Counter 16 Value	value of the indicated counter
`value16`	Counter 17 Value	value of the indicated counter
`value17`	Counter 18 Value	value of the indicated counter
`value18`	Counter 19 Value	value of the indicated counter
`value19`	Counter 20 Value	value of the indicated counter
`_counters`	Counters	the current selection of counterschoose counters
`_frequency`	Update every	amount of time between checks of a monitor
`_name`	Title	title that should appear in the Monitor table (optional)
`_disabled`	Disable	temporarily disable monitor sampling and alerting
`_verifyError`	Verify Error	if the monitor detects an error, immediately perform the check again to verify the error.
`_errorFrequency`	Update every (on errors)	the amount of time between checks whenever the status of the monitor is not ok; the Update value from above is used if this is left blank
`_schedule`	Schedule	schedule for the monitor to be enabled - for example, "weekdays, 9-6" enables the monitor to run from 9am to 6pm, Monday - Friday
`_notLogToTopaz`	Stop Logging To Mercury Application Management	Check this box to not log the data for this monitor to Mercury Application Management
`_monitorDescription`	Monitor Description	additional description of monitor that appears on Monitor Detail page (optional)
`_onlyStatusChanges`	_onlyStatusChanges	state of the indicated configuration option
`_description`	Report Description	additional description of monitor that appears on Reports and in monitor popup info (optional)
`_logOnlyThresholdMeas`	_logOnlyThresholdMeas	state of the indicated configuration option
`__template`	Monitor Template	monitor template to use for this monitor
`_logOnlyMonitorData`	_logOnlyMonitorData	state of the indicated configuration option
`_dependsOn`	Depends On	Choose the monitor that this monitor depends on
`_dependsCondition`	Depends Condition	If OK, this monitor is only enabled if the Depends On monitor is OK.

Monitor Type: Log File


name	label	description
`lastMeasurement`	lastMeasurement	value of the indicated measurement
`startSearchPosition`	startSearchPosition	value of the indicated measurement
`matchCount`	matches	value of the indicated measurement
`lineCount`	lines	value of the indicated measurement
`message`	message	value of the indicated measurement
`lastModDate`	lastModDate	value of the indicated measurement
`logName`	Don't use in Templates	value of the indicated measurement
`lastFilePosition`	lastFilePosition	value of the indicated measurement
`matchDetails`	matchDetails	value of the indicated measurement
`lastAlertsPerMinute`	matches/min	most recent matches/min reported
`lastLinesPerMinute`	lines/min	most recent lines/min reported
`value`	value	value of the indicated counter
`value2`	value2	value of the indicated counter
`value3`	value3	value of the indicated counter
`value4`	value4	value of the indicated counter
`_logFile`	Log File Pathname	the pathname of the log file to monitor In order to monitor remote Unix files choose the 'Choose Server' link above. For NT, you must specify the UNC path to the file. For example, \\machinename\sharename\filename.log. Optionally, use a regular expression to insert date and time variables (e.g s/ex$shortYear$$0month$$0day$.log/ to match IIS log files)
`remoteMachineName`	Remote Server	use this field instead of `_machine`, if you need the name of the remote machine to appear in the template
`_resetFile`	Check from Beginning	Select file checking option as follows: Never - Check only newly added records (default) First Time Only - Check the whole file once, then only new records Always - Always check the whole file
`_alerting`	Run Alerts	How alerts for this monitor are triggered by the following options: (1) For 'for each log entry matched and report status' the monitor triggers alerts for every matching entry found based on the Error If and Warning If thresholds defined for the monitor. (2) For 'once, after all log entries have been checked', the monitor counts up the number of matches and then triggers alerts based on the Error If and Warning If thresholds defined for the monitor.
`_match`	Content Match	enter the text to match in a log entry or a regular expression. By default successful match makes monitor alert or error.
`_frequency`	Update every	amount of time between checks of a monitor
`_name`	Title	title that should appear in the Monitor table (optional)
`_disabled`	Disable	temporarily disable monitor sampling and alerting
`_rulesFile`	Rules File Pathname	optional, pathname to a custom rules file, used instead of Content Match (for example C:/SiteScope/classes /CustomMonitor/examples/sample.rules
`_noFileCheckExist`	No Error on File Not Found.	if the file is not found then don't error.
`_valeLabels`	Match Value Labels	Labels for the values matched on the script output, separated by a ","
`_verifyError`	Verify Error	if the monitor detects an error, immediately perform the check again to verify the error.
`_errorFrequency`	Update every (on errors)	the amount of time between checks whenever the status of the monitor is not ok; the Update value from above is used if this is left blank
`_schedule`	Schedule	schedule for the monitor to be enabled - for example, "weekdays, 9-6" enables the monitor to run from 9am to 6pm, Monday - Friday
`_notLogToTopaz`	Stop Logging To Mercury Application Management	Check this box to not log the data for this monitor to Mercury Application Management
`_monitorDescription`	Monitor Description	additional description of monitor that appears on Monitor Detail page (optional)
`_onlyStatusChanges`	_onlyStatusChanges	state of the indicated configuration option
`_description`	Report Description	additional description of monitor that appears on Reports and in monitor popup info (optional)
`_logOnlyThresholdMeas`	_logOnlyThresholdMeas	state of the indicated configuration option
`__template`	Monitor Template	monitor template to use for this monitor
`_logOnlyMonitorData`	_logOnlyMonitorData	state of the indicated configuration option
`_dependsOn`	Depends On	Choose the monitor that this monitor depends on
`_dependsCondition`	Depends Condition	If OK, this monitor is only enabled if the Depends On monitor is OK.

Monitor Type: Mail


name	label	description
`status`	status	most recent status of the monitor
`matchValue`	content match	value of the indicated measurement
`roundTripTime`	round trip time	most recent round trip time reported
`smtpTime`	Send time	most recent Send time reported
`receiveTime`	Receive time	most recent Receive time reported
`_receiveOnly`	Action	the action the monitor will take with the e-mail message. For example, send and receive or receive only.
`_smtpServer`	Sending Mail Server (SMTP)	hostname of mail server where test message is sent - for example, mail.sitescope.com
`_popUser`	Send To Address	address where test message is sent to - for example, support@mercury.com
`_useIMAP`	Receiving Protocol	the protocol used to receive the message
`_popServer`	Receiving Mail Server	the mail server where the test message is received - for example, mail.sitescope.com
`_popAccount`	Receiving Mail Server User Name	the account name for the receiving mailbox - for example, support
`_popPassword`	Receiving Mail Server Password	the password for the receiving mailbox
`_frequency`	Update every	amount of time between checks of a monitor
`_name`	Title	title that should appear in the Monitor table (optional)
`_disabled`	Disable	temporarily disable monitor sampling and alerting
`_content`	Receive Content Match	for Receive Only, the text to match in the contents of the received message. (example: Subject: MySubject)
`_checkTimeout`	Timeout	amount of time (in seconds) to keep checking for the message to be received
`_checkEvery`	POP Check Delay	delay (in seconds) between each login to the receiving server, while waiting for the message to arrive
`_attachment`	Attachment	Enter the full path name of a file to attach to the email Optionally, use a regular expression to insert date and time variables (e.g s/C:\firstdir\$shortYear$$0month$$0day$/)
`_smtpUser`	SMTP User	User name for smtp-auth
`_smtpPassword`	SMTP Password	the password for smtp-auth server
`_verifyError`	Verify Error	if the monitor detects an error, immediately perform the check again to verify the error.
`_errorFrequency`	Update every (on errors)	the amount of time between checks whenever the status of the monitor is not ok; the Update value from above is used if this is left blank
`_notLogToTopaz`	Stop Logging To Mercury Application Management	Check this box to not log the data for this monitor to Mercury Application Management
`_schedule`	Schedule	schedule for the monitor to be enabled - for example, "weekdays, 9-6" enables the monitor to run from 9am to 6pm, Monday - Friday
`_onlyStatusChanges`	_onlyStatusChanges	state of the indicated configuration option
`_monitorDescription`	Monitor Description	additional description of monitor that appears on Monitor Detail page (optional)
`_logOnlyThresholdMeas`	_logOnlyThresholdMeas	state of the indicated configuration option
`_description`	Report Description	additional description of monitor that appears on Reports and in monitor popup info (optional)
`_logOnlyMonitorData`	_logOnlyMonitorData	state of the indicated configuration option
`__template`	Monitor Template	monitor template to use for this monitor
`_dependsOn`	Depends On	Choose the monitor that this monitor depends on
`_dependsCondition`	Depends Condition	If OK, this monitor is only enabled if the Depends On monitor is OK.

Monitor Type: MAPI


name	label	description
`roundTripValue`	Round Trip	most recent Round Trip reported
`_server`	Receiver Server	MS Exchange server of the receiving mailbox.
`_mailbox`	Receiver Mailbox	The alias of the receiving mailbox.
`_userDomain`	Receiver Domain	The domain to which both the receiving mailbox owner and the receiving MS exchange server belong.
`_userName`	Receiver User Name	Login name for the NT account of the receiving mailbox owner
`_userPwd`	Receiving User Password	The password of the above receiving account
`_senderServer`	Sender Server	name of the sender's MS Exchange server name.Notes: 1. The MAPI sender is ignored if an SMTP sender is specified below.2. If no SMTP sender values are specified below, the receiver values will be used if any of the sender values are not specified
`_senderMailbox`	Sender Mailbox	The alias of the sending mailbox.
`_senderUserDomain`	Sender Domain	The domain to which both the sending mailbox owner and the sending MS exchange server belong.
`_senderUserName`	Sender User Name	Login name for the NT account of the sending mailbox owner
`_senderUserPwd`	Sender Password	The password of the above sender account
`_frequency`	Update every	amount of time between checks of a monitor
`_name`	Title	title that should appear in the Monitor table (optional)
`_disabled`	Disable	temporarily disable monitor sampling and alerting
`_timeout`	Transaction timeout	Number of seconds the monitor will wait for the message to arrive
`_SMTPServer`	SMTP Server	SMTP server through which an outgoing message will be sent.Note: if you set any of the SMTP values (server, sender or receiver) they will override the MAPI sender options above
`_senderAddress`	Sender	SMTP Sender email address
`_receiverAddress`	Receiver	Receipient email address. Must match the recipient mailbox alias above
`_attachment`	Attachment	Full path to the file that will be attached to the outgoing SMTP message
`_verifyError`	Verify Error	if the monitor detects an error, immediately perform the check again to verify the error.
`_errorFrequency`	Update every (on errors)	the amount of time between checks whenever the status of the monitor is not ok; the Update value from above is used if this is left blank
`_notLogToTopaz`	Stop Logging To Mercury Application Management	Check this box to not log the data for this monitor to Mercury Application Management
`_schedule`	Schedule	schedule for the monitor to be enabled - for example, "weekdays, 9-6" enables the monitor to run from 9am to 6pm, Monday - Friday
`_onlyStatusChanges`	_onlyStatusChanges	state of the indicated configuration option
`_monitorDescription`	Monitor Description	additional description of monitor that appears on Monitor Detail page (optional)
`_logOnlyThresholdMeas`	_logOnlyThresholdMeas	state of the indicated configuration option
`_description`	Report Description	additional description of monitor that appears on Reports and in monitor popup info (optional)
`_logOnlyMonitorData`	_logOnlyMonitorData	state of the indicated configuration option
`__template`	Monitor Template	monitor template to use for this monitor
`_dependsOn`	Depends On	Choose the monitor that this monitor depends on
`_dependsCondition`	Depends Condition	If OK, this monitor is only enabled if the Depends On monitor is OK.

Monitor Type: Master Health Monitor


name	label	description
`numErrors`	numErrors	most recent numErrors reported
`_frequency`	Update every	amount of time between checks of a monitor
`_name`	Title	title that should appear in the Monitor table (optional)
`_disabled`	Disable	temporarily disable monitor sampling and alerting
`_verifyError`	Verify Error	if the monitor detects an error, immediately perform the check again to verify the error.
`_errorFrequency`	Update every (on errors)	the amount of time between checks whenever the status of the monitor is not ok; the Update value from above is used if this is left blank
`_schedule`	Schedule	schedule for the monitor to be enabled - for example, "weekdays, 9-6" enables the monitor to run from 9am to 6pm, Monday - Friday
`_notLogToTopaz`	Stop Logging To Mercury Application Management	Check this box to not log the data for this monitor to Mercury Application Management
`_monitorDescription`	Monitor Description	additional description of monitor that appears on Monitor Detail page (optional)
`_onlyStatusChanges`	_onlyStatusChanges	state of the indicated configuration option
`_description`	Report Description	additional description of monitor that appears on Reports and in monitor popup info (optional)
`_logOnlyThresholdMeas`	_logOnlyThresholdMeas	state of the indicated configuration option
`__template`	Monitor Template	monitor template to use for this monitor
`_logOnlyMonitorData`	_logOnlyMonitorData	state of the indicated configuration option
`_dependsOn`	Depends On	Choose the monitor that this monitor depends on
`_dependsCondition`	Depends Condition	If OK, this monitor is only enabled if the Depends On monitor is OK.

Monitor Type: Memory


name	label	description
`lastMeasurement`	lastMeasurement	value of the indicated measurement
`lastPageFaults`	lastPageFaults	value of the indicated measurement
`percentFull`	percent used	most recent percent used reported
`freeSpace`	MB free	most recent MB free reported
`pageFaultsPerSecond`	pages/sec	most recent pages/sec reported
`remoteMachineName`	Remote Server	use this field instead of `_machine`, if you need the name of the remote machine to appear in the template
`_frequency`	Update every	amount of time between checks of a monitor
`_name`	Title	title that should appear in the Monitor table (optional)
`_disabled`	Disable	temporarily disable monitor sampling and alerting
`_verifyError`	Verify Error	if the monitor detects an error, immediately perform the check again to verify the error.
`_errorFrequency`	Update every (on errors)	the amount of time between checks whenever the status of the monitor is not ok; the Update value from above is used if this is left blank
`_schedule`	Schedule	schedule for the monitor to be enabled - for example, "weekdays, 9-6" enables the monitor to run from 9am to 6pm, Monday - Friday
`_notLogToTopaz`	Stop Logging To Mercury Application Management	Check this box to not log the data for this monitor to Mercury Application Management
`_monitorDescription`	Monitor Description	additional description of monitor that appears on Monitor Detail page (optional)
`_onlyStatusChanges`	_onlyStatusChanges	state of the indicated configuration option
`_description`	Report Description	additional description of monitor that appears on Reports and in monitor popup info (optional)
`_logOnlyThresholdMeas`	_logOnlyThresholdMeas	state of the indicated configuration option
`__template`	Monitor Template	monitor template to use for this monitor
`_logOnlyMonitorData`	_logOnlyMonitorData	state of the indicated configuration option
`_dependsOn`	Depends On	Choose the monitor that this monitor depends on
`_dependsCondition`	Depends Condition	If OK, this monitor is only enabled if the Depends On monitor is OK.

Monitor Type: MG Health Monitor


name	label	description
`numErrors`	numErrors	most recent numErrors reported
`_frequency`	Update every	amount of time between checks of a monitor
`_name`	Title	title that should appear in the Monitor table (optional)
`_disabled`	Disable	temporarily disable monitor sampling and alerting
`_verifyError`	Verify Error	if the monitor detects an error, immediately perform the check again to verify the error.
`_errorFrequency`	Update every (on errors)	the amount of time between checks whenever the status of the monitor is not ok; the Update value from above is used if this is left blank
`_schedule`	Schedule	schedule for the monitor to be enabled - for example, "weekdays, 9-6" enables the monitor to run from 9am to 6pm, Monday - Friday
`_notLogToTopaz`	Stop Logging To Mercury Application Management	Check this box to not log the data for this monitor to Mercury Application Management
`_monitorDescription`	Monitor Description	additional description of monitor that appears on Monitor Detail page (optional)
`_onlyStatusChanges`	_onlyStatusChanges	state of the indicated configuration option
`_description`	Report Description	additional description of monitor that appears on Reports and in monitor popup info (optional)
`_logOnlyThresholdMeas`	_logOnlyThresholdMeas	state of the indicated configuration option
`__template`	Monitor Template	monitor template to use for this monitor
`_logOnlyMonitorData`	_logOnlyMonitorData	state of the indicated configuration option
`_dependsOn`	Depends On	Choose the monitor that this monitor depends on
`_dependsCondition`	Depends Condition	If OK, this monitor is only enabled if the Depends On monitor is OK.

Monitor Type: Monitor Load Monitor


name	label	description
`status`	status	most recent status of the monitor
`value0`	Counter 1 Value	value of the indicated counter
`value1`	Counter 2 Value	value of the indicated counter
`value2`	Counter 3 Value	value of the indicated counter
`value3`	Counter 4 Value	value of the indicated counter
`value4`	Counter 5 Value	value of the indicated counter
`value5`	Counter 6 Value	value of the indicated counter
`value6`	Counter 7 Value	value of the indicated counter
`value7`	Counter 8 Value	value of the indicated counter
`value8`	Counter 9 Value	value of the indicated counter
`value9`	Counter 10 Value	value of the indicated counter
`value10`	Counter 11 Value	value of the indicated counter
`value11`	Counter 12 Value	value of the indicated counter
`value12`	Counter 13 Value	value of the indicated counter
`value13`	Counter 14 Value	value of the indicated counter
`value14`	Counter 15 Value	value of the indicated counter
`value15`	Counter 16 Value	value of the indicated counter
`value16`	Counter 17 Value	value of the indicated counter
`value17`	Counter 18 Value	value of the indicated counter
`value18`	Counter 19 Value	value of the indicated counter
`value19`	Counter 20 Value	value of the indicated counter
`_counters`	Counters	the current selection of counterschoose counters
`_frequency`	Update every	amount of time between checks of a monitor
`_name`	Title	title that should appear in the Monitor table (optional)
`_disabled`	Disable	temporarily disable monitor sampling and alerting
`_verifyError`	Verify Error	if the monitor detects an error, immediately perform the check again to verify the error.
`_errorFrequency`	Update every (on errors)	the amount of time between checks whenever the status of the monitor is not ok; the Update value from above is used if this is left blank
`_schedule`	Schedule	schedule for the monitor to be enabled - for example, "weekdays, 9-6" enables the monitor to run from 9am to 6pm, Monday - Friday
`_notLogToTopaz`	Stop Logging To Mercury Application Management	Check this box to not log the data for this monitor to Mercury Application Management
`_monitorDescription`	Monitor Description	additional description of monitor that appears on Monitor Detail page (optional)
`_onlyStatusChanges`	_onlyStatusChanges	state of the indicated configuration option
`_description`	Report Description	additional description of monitor that appears on Reports and in monitor popup info (optional)
`_logOnlyThresholdMeas`	_logOnlyThresholdMeas	state of the indicated configuration option
`__template`	Monitor Template	monitor template to use for this monitor
`_logOnlyMonitorData`	_logOnlyMonitorData	state of the indicated configuration option
`_dependsOn`	Depends On	Choose the monitor that this monitor depends on
`_dependsCondition`	Depends Condition	If OK, this monitor is only enabled if the Depends On monitor is OK.

Monitor Type: iPlanet Server


name	label	description
`status`	status	most recent status of the monitor
`value0`	Counter 1 Value	value of the indicated counter
`value1`	Counter 2 Value	value of the indicated counter
`value2`	Counter 3 Value	value of the indicated counter
`value3`	Counter 4 Value	value of the indicated counter
`value4`	Counter 5 Value	value of the indicated counter
`value5`	Counter 6 Value	value of the indicated counter
`value6`	Counter 7 Value	value of the indicated counter
`value7`	Counter 8 Value	value of the indicated counter
`value8`	Counter 9 Value	value of the indicated counter
`value9`	Counter 10 Value	value of the indicated counter
`_apacheCounters`	Counters	the current selection of counterschoose counters
`_url`	URL	the server administration URL (example: http://server:adminport /https-SERVERINSTANCE/bin/sitemon?doit:)
`_username`	Authorization User Name	optional user name if the URL requires authorization
`_password`	Authorization Password	optional password if the URL requires authorization
`_frequency`	Update every	amount of time between checks of a monitor
`_name`	Title	title that should appear in the Monitor table (optional)
`_disabled`	Disable	temporarily disable monitor sampling and alerting
`_timeout`	Timeout	the time out, in seconds, to wait for the response
`_proxy`	HTTP Proxy	optional proxy server to use including port (example: proxy.sitescope.com:8080)
`_proxyusername`	Proxy Server User Name	optional user name if the proxy server requires authorization
`_proxypassword`	Proxy Server Password	optional password if the proxy server requires authorization
`_challengeResponse`	NT Challenge Response	when selected, use NT Challenge Response authorization
`_verifyError`	Verify Error	if the monitor detects an error, immediately perform the check again to verify the error.
`_errorFrequency`	Update every (on errors)	the amount of time between checks whenever the status of the monitor is not ok; the Update value from above is used if this is left blank
`_notLogToTopaz`	Stop Logging To Mercury Application Management	Check this box to not log the data for this monitor to Mercury Application Management
`_schedule`	Schedule	schedule for the monitor to be enabled - for example, "weekdays, 9-6" enables the monitor to run from 9am to 6pm, Monday - Friday
`_onlyStatusChanges`	_onlyStatusChanges	state of the indicated configuration option
`_monitorDescription`	Monitor Description	additional description of monitor that appears on Monitor Detail page (optional)
`_logOnlyThresholdMeas`	_logOnlyThresholdMeas	state of the indicated configuration option
`_description`	Report Description	additional description of monitor that appears on Reports and in monitor popup info (optional)
`_logOnlyMonitorData`	_logOnlyMonitorData	state of the indicated configuration option
`__template`	Monitor Template	monitor template to use for this monitor
`_dependsOn`	Depends On	Choose the monitor that this monitor depends on
`_dependsCondition`	Depends Condition	If OK, this monitor is only enabled if the Depends On monitor is OK.

Monitor Type: Network Bandwidth


name	label	description
`RTNameToLabelMap`	RTNameToLabelMap	value of the indicated measurement
`NameToLabelMap`	NameToLabelMap	value of the indicated measurement
`RTPropertiesOnSameGraphMap`	RTPropertiesOnSameGraphMap	value of the indicated measurement
`lastRunTime`	lastRunTime	value of the indicated measurement
`RTNameToGraphLabelMap`	RTNameToGraphLabelMap	value of the indicated measurement
`browsableValue2`	browsableValue2	value of the indicated browsable counter
`browsableValue3`	browsableValue3	value of the indicated browsable counter
`browsableValue4`	browsableValue4	value of the indicated browsable counter
`browsableValue5`	browsableValue5	value of the indicated browsable counter
`browsableValue6`	browsableValue6	value of the indicated browsable counter
`browsableValue7`	browsableValue7	value of the indicated browsable counter
`browsableValue8`	browsableValue8	value of the indicated browsable counter
`browsableValue9`	browsableValue9	value of the indicated browsable counter
`browsableValue10`	browsableValue10	value of the indicated browsable counter
`_server`	Server	the IP address or host name of the agent
`_snmpversion`	SNMP Version	the version of SNMP to use when requesting data from the server
`_browseName1`	_browseName1	ID number assigned to the indicated browsable counter number
`_community`	V1/V2 Community	the community for the SNMP agent for SNMP V1/V2 only
`_browseNameid1`	_browseNameid1	ID number assigned to the indicated browsable counter number
`_browseName2`	_browseName2	ID number assigned to the indicated browsable counter number
`_snmpv3authtype`	SNMP V3 Authentication Type	Type of authentication to be used for SNMP V3 only
`_browseNameid2`	_browseNameid2	ID number assigned to the indicated browsable counter number
`_browseNameid3`	_browseNameid3	ID number assigned to the indicated browsable counter number
`_snmpv3username`	SNMP V3 Username	Username to be used for authentication for SNMP V3 only
`_browseName3`	_browseName3	ID number assigned to the indicated browsable counter number
`_browseNameid4`	_browseNameid4	ID number assigned to the indicated browsable counter number
`_snmpv3authpassword`	SNMP V3 Authentication Password	Password to be used for authentication for SNMP V3 only
`_browseName4`	_browseName4	ID number assigned to the indicated browsable counter number
`_browseNameid5`	_browseNameid5	ID number assigned to the indicated browsable counter number
`_browseName5`	_browseName5	ID number assigned to the indicated browsable counter number
`_snmpv3privpassword`	SNMP V3 Privacy Password	Password to be used for DES privacy for SNMP V3 only
`_contextEngineID`	SNMP V3 Context Engine ID	a hexidecimal string representing the Context Engine ID to use for this connection for SNMP V3 only
`_browseName6`	_browseName6	ID number assigned to the indicated browsable counter number
`_browseNameid6`	_browseNameid6	ID number assigned to the indicated browsable counter number
`_browseNameid7`	_browseNameid7	ID number assigned to the indicated browsable counter number
`_browseName7`	_browseName7	ID number assigned to the indicated browsable counter number
`_contextName`	SNMP V3 Context Name	the Context Name to use for this connection for SNMP V3 only
`_browseNameid8`	_browseNameid8	ID number assigned to the indicated browsable counter number
`_browseName8`	_browseName8	ID number assigned to the indicated browsable counter number
`_browseNameid9`	_browseNameid9	ID number assigned to the indicated browsable counter number
`_browseName9`	_browseName9	ID number assigned to the indicated browsable counter number
`_browseName10`	_browseName10	ID number assigned to the indicated browsable counter number
`_browseNameid10`	_browseNameid10	ID number assigned to the indicated browsable counter number
`_browse`	Counters	Current selection of counters.
`_frequency`	Update every	amount of time between checks of a monitor
`_name`	Title	title that should appear in the Monitor table (optional)
`_disabled`	Disable	temporarily disable monitor sampling and alerting
`_duplexState`	Duplex or Half-Duplex	the duplex state to use when calculating percent bandwidth utilized for all selected interfaces on this device
`_indexingMethod`	Interface Index	specify how SiteScope should keep track of the interfaces it is monitoring. Some network devices do not persist the index used to identify a particular interface between reboots. The interface description or physical address will usually remain the same, however.
`_showRTTraffic`	Show Bytes In/Out	display a graph for bytes in/out along with percent bandwidth utilized on the Real-Time Metrics page
`_maxRTDataWindow`	Real-Time Data Time Window	the number of hours for which real-time graph data should be stored
`_maxRTDataVerticalAxis`	Real-Time Data Vertical Axis	the maximum value on the vertical axis for real-time graphs (leave blank to have this automatically calculated)
`_timeout`	Timeout	the time in seconds to wait for all requests to complete (including retries)
`_retries`	Retries	the number of times to retry a request that has timed out
`_port`	Port	the port number on which to query the SNMP agent
`_verifyError`	Verify Error	if the monitor detects an error, immediately perform the check again to verify the error.
`_errorFrequency`	Update every (on errors)	the amount of time between checks whenever the status of the monitor is not ok; the Update value from above is used if this is left blank
`_schedule`	Schedule	schedule for the monitor to be enabled - for example, "weekdays, 9-6" enables the monitor to run from 9am to 6pm, Monday - Friday
`_notLogToTopaz`	Stop Logging To Mercury Application Management	Check this box to not log the data for this monitor to Mercury Application Management
`_monitorDescription`	Monitor Description	additional description of monitor that appears on Monitor Detail page (optional)
`_onlyStatusChanges`	_onlyStatusChanges	state of the indicated configuration option
`_description`	Report Description	additional description of monitor that appears on Reports and in monitor popup info (optional)
`_logOnlyThresholdMeas`	_logOnlyThresholdMeas	state of the indicated configuration option
`__template`	Monitor Template	monitor template to use for this monitor
`_logOnlyMonitorData`	_logOnlyMonitorData	state of the indicated configuration option
`_dependsOn`	Depends On	Choose the monitor that this monitor depends on
`_dependsCondition`	Depends Condition	If OK, this monitor is only enabled if the Depends On monitor is OK.

Monitor Type: Network


name	label	description
`lastMeasurement`	lastMeasurement	value of the indicated measurement
`lastBytesOut`	lastBytesOut	value of the indicated measurement
`lastBytesIn`	lastBytesIn	value of the indicated measurement
`lastPacketErrors`	lastPacketErrors	value of the indicated measurement
`outBytesPerSecond`	bytes/sec sent	most recent bytes/sec sent reported
`inBytesPerSecond`	bytes/sec received	most recent bytes/sec received reported
`connections`	Active connections	most recent Active connections reported
`errorsPerSecond`	packet errors/sec	most recent packet errors/sec reported
`_frequency`	Update every	amount of time between checks of a monitor
`_name`	Title	title that should appear in the Monitor table (optional)
`_disabled`	Disable	temporarily disable monitor sampling and alerting
`_verifyError`	Verify Error	if the monitor detects an error, immediately perform the check again to verify the error.
`_errorFrequency`	Update every (on errors)	the amount of time between checks whenever the status of the monitor is not ok; the Update value from above is used if this is left blank
`_schedule`	Schedule	schedule for the monitor to be enabled - for example, "weekdays, 9-6" enables the monitor to run from 9am to 6pm, Monday - Friday
`_notLogToTopaz`	Stop Logging To Mercury Application Management	Check this box to not log the data for this monitor to Mercury Application Management
`_monitorDescription`	Monitor Description	additional description of monitor that appears on Monitor Detail page (optional)
`_onlyStatusChanges`	_onlyStatusChanges	state of the indicated configuration option
`_description`	Report Description	additional description of monitor that appears on Reports and in monitor popup info (optional)
`_logOnlyThresholdMeas`	_logOnlyThresholdMeas	state of the indicated configuration option
`__template`	Monitor Template	monitor template to use for this monitor
`_logOnlyMonitorData`	_logOnlyMonitorData	state of the indicated configuration option
`_dependsOn`	Depends On	Choose the monitor that this monitor depends on
`_dependsCondition`	Depends Condition	If OK, this monitor is only enabled if the Depends On monitor is OK.

Monitor Type: News


name	label	description
`status`	status	most recent status of the monitor
`roundTripTime`	round trip time	most recent round trip time reported
`articleCount`	number of articles	most recent number of articles reported
`_server`	News Server	the IP address or host name of the news server (examples: 206.168.191.21 or news.sitescope.com)
`_newsgroups`	News Groups	optional news groups that will be checked - separate multiple groups with commas (examples: misc.jobs.offered
`_frequency`	Update every	amount of time between checks of a monitor
`_name`	Title	title that should appear in the Monitor table (optional)
`_disabled`	Disable	temporarily disable monitor sampling and alerting
`_timeout`	Timeout	the time out, seconds, to wait for the information about the news groups to be retrieved
`_username`	User Name	optional user name if the News server requires authorization
`_password`	Password	optional password if the News server requires authorization
`_localIP`	Connect From	optional IP address to connect from
`_verifyError`	Verify Error	if the monitor detects an error, immediately perform the check again to verify the error.
`_errorFrequency`	Update every (on errors)	the amount of time between checks whenever the status of the monitor is not ok; the Update value from above is used if this is left blank
`_notLogToTopaz`	Stop Logging To Mercury Application Management	Check this box to not log the data for this monitor to Mercury Application Management
`_schedule`	Schedule	schedule for the monitor to be enabled - for example, "weekdays, 9-6" enables the monitor to run from 9am to 6pm, Monday - Friday
`_onlyStatusChanges`	_onlyStatusChanges	state of the indicated configuration option
`_monitorDescription`	Monitor Description	additional description of monitor that appears on Monitor Detail page (optional)
`_logOnlyThresholdMeas`	_logOnlyThresholdMeas	state of the indicated configuration option
`_description`	Report Description	additional description of monitor that appears on Reports and in monitor popup info (optional)
`_logOnlyMonitorData`	_logOnlyMonitorData	state of the indicated configuration option
`__template`	Monitor Template	monitor template to use for this monitor
`_dependsOn`	Depends On	Choose the monitor that this monitor depends on
`_dependsCondition`	Depends Condition	If OK, this monitor is only enabled if the Depends On monitor is OK.

Monitor Type: Windows Performance Counter


name	label	description
`lastMeasurement0`	lastMeasurement0	value of the indicated measurement
`lastMeasurement1`	lastMeasurement1	value of the indicated measurement
`lastMeasurement2`	lastMeasurement2	value of the indicated measurement
`lastMeasurement3`	lastMeasurement3	value of the indicated measurement
`lastMeasurement4`	lastMeasurement4	value of the indicated measurement
`lastMeasurement5`	lastMeasurement5	value of the indicated measurement
`lastMeasurement6`	lastMeasurement6	value of the indicated measurement
`lastMeasurement7`	lastMeasurement7	value of the indicated measurement
`lastMeasurement8`	lastMeasurement8	value of the indicated measurement
`lastMeasurement9`	lastMeasurement9	value of the indicated measurement
`lastMeasurementWasNotAvailable`	lastMeasurementWasNotAvailable	value of the indicated measurement
`lastMeasurementTicks`	lastMeasurementTicks	value of the indicated measurement
`lastMeasurementTime`	lastMeasurementTime	value of the indicated measurement
`countersInError`	countersInError	value of the indicated measurement
`measurement0`	measurement0	value of the indicated measurement
`measurement1`	measurement1	value of the indicated measurement
`measurement2`	measurement2	value of the indicated measurement
`measurement3`	measurement3	value of the indicated measurement
`measurement4`	measurement4	value of the indicated measurement
`measurement5`	measurement5	value of the indicated measurement
`measurement6`	measurement6	value of the indicated measurement
`measurement7`	measurement7	value of the indicated measurement
`measurement8`	measurement8	value of the indicated measurement
`measurement9`	measurement9	value of the indicated measurement
`lastBaseMeasurement0`	lastBaseMeasurement0	value of the indicated measurement
`lastBaseMeasurement1`	lastBaseMeasurement1	value of the indicated measurement
`lastBaseMeasurement2`	lastBaseMeasurement2	value of the indicated measurement
`lastBaseMeasurement3`	lastBaseMeasurement3	value of the indicated measurement
`lastBaseMeasurement4`	lastBaseMeasurement4	value of the indicated measurement
`lastBaseMeasurement5`	lastBaseMeasurement5	value of the indicated measurement
`lastBaseMeasurement6`	lastBaseMeasurement6	value of the indicated measurement
`lastBaseMeasurement7`	lastBaseMeasurement7	value of the indicated measurement
`lastBaseMeasurement8`	lastBaseMeasurement8	value of the indicated measurement
`lastBaseMeasurement9`	lastBaseMeasurement9	value of the indicated measurement
`value0`	Counter 1 Value	value of the indicated counter
`value1`	Counter 2 Value	value of the indicated counter
`value2`	Counter 3 Value	value of the indicated counter
`value3`	Counter 4 Value	value of the indicated counter
`value4`	Counter 5 Value	value of the indicated counter
`value5`	Counter 6 Value	value of the indicated counter
`value6`	Counter 7 Value	value of the indicated counter
`value7`	Counter 8 Value	value of the indicated counter
`value8`	Counter 9 Value	value of the indicated counter
`value9`	Counter 10 Value	value of the indicated counter
`percentdeviation0`	Counter 1 Percent Deviation	most recent Counter 1 Percent Deviation reported
`percentdeviation1`	Counter 2 Percent Deviation	most recent Counter 2 Percent Deviation reported
`percentdeviation2`	Counter 3 Percent Deviation	most recent Counter 3 Percent Deviation reported
`percentdeviation3`	Counter 4 Percent Deviation	most recent Counter 4 Percent Deviation reported
`percentdeviation4`	Counter 5 Percent Deviation	most recent Counter 5 Percent Deviation reported
`percentdeviation5`	Counter 6 Percent Deviation	most recent Counter 6 Percent Deviation reported
`percentdeviation6`	Counter 7 Percent Deviation	most recent Counter 7 Percent Deviation reported
`percentdeviation7`	Counter 8 Percent Deviation	most recent Counter 8 Percent Deviation reported
`percentdeviation8`	Counter 9 Percent Deviation	most recent Counter 9 Percent Deviation reported
`percentdeviation9`	Counter 10 Percent Deviation	most recent Counter 10 Percent Deviation reported
`_pmcfile`	PerfMon Chart File	a Performance Monitor setting file that specifies the counters (from templates.perfmon directory)
`remoteMachineName`	Remote Server	use this field instead of `_machine`, if you need the name of the remote machine to appear in the template
`_frequency`	Update every	amount of time between checks of a monitor
`_name`	Title	title that should appear in the Monitor table (optional)
`_disabled`	Disable	temporarily disable monitor sampling and alerting
`_object`	Object	this is same as the name of the object in the NT Performance Monitor under "Add to Chart"
`_counter`	Counter	this is same as the name of the counter in the NT Performance Monitor under "Add to Chart"
`_instance`	Instance	this is same as the instance in the NT Performance Monitor under "Add to Chart". Leaving this blank will choose the first instance in the list, if there are multiple instances.
`_units`	Units	optional units string to append when displaying the value of this counter.
`_scale`	Scale	optional scale multiplier for this counter - for example, you may want to scale a disk usage counter by megabytes to make the output more readable.
`_monitorRunCount`	Baseline Interval	The number of monitor runs to be averaged for a Rolling Baseline.
`_verifyError`	Verify Error	if the monitor detects an error, immediately perform the check again to verify the error.
`_errorFrequency`	Update every (on errors)	the amount of time between checks whenever the status of the monitor is not ok; the Update value from above is used if this is left blank
`_notLogToTopaz`	Stop Logging To Mercury Application Management	Check this box to not log the data for this monitor to Mercury Application Management
`_schedule`	Schedule	schedule for the monitor to be enabled - for example, "weekdays, 9-6" enables the monitor to run from 9am to 6pm, Monday - Friday
`_onlyStatusChanges`	_onlyStatusChanges	state of the indicated configuration option
`_monitorDescription`	Monitor Description	additional description of monitor that appears on Monitor Detail page (optional)
`_logOnlyThresholdMeas`	_logOnlyThresholdMeas	state of the indicated configuration option
`_description`	Report Description	additional description of monitor that appears on Reports and in monitor popup info (optional)
`_logOnlyMonitorData`	_logOnlyMonitorData	state of the indicated configuration option
`__template`	Monitor Template	monitor template to use for this monitor
`_dependsOn`	Depends On	Choose the monitor that this monitor depends on
`_dependsCondition`	Depends Condition	If OK, this monitor is only enabled if the Depends On monitor is OK.

Monitor Type: Windows Dial-up


name	label	description
`status`	status	most recent status of the monitor
`monitorErrorCount`	monitorErrorCount	value of the indicated measurement
`monitorCount`	monitorCount	value of the indicated measurement
`monitorWarningCount`	monitorWarningCount	value of the indicated measurement
`time`	total time	most recent total time reported
`percentGood`	% monitors good	most recent % monitors good reported
`connectTime`	time to connect	most recent time to connect reported
`authorizationTime`	time to authorize	most recent time to authorize reported
`_phone`	Phone number	the phone number to dial into
`_username`	Account Login	the login for the dial-up account
`_password`	Account Password	the password for the dial-up account
`_monitors`	Monitor(s) to run	the monitor(s) to run while dialed up - multiple monitors or groups can be selected
`_frequency`	Update every	amount of time between checks of a monitor
`_name`	Title	title that should appear in the Monitor table (optional)
`_disabled`	Disable	temporarily disable monitor sampling and alerting
`_timeout`	Timeout	the maximum time, in seconds, to wait for all of the monitors to complete
`_verifyError`	Verify Error	if the monitor detects an error, immediately perform the check again to verify the error.
`_errorFrequency`	Update every (on errors)	the amount of time between checks whenever the status of the monitor is not ok; the Update value from above is used if this is left blank
`_notLogToTopaz`	Stop Logging To Mercury Application Management	Check this box to not log the data for this monitor to Mercury Application Management
`_schedule`	Schedule	schedule for the monitor to be enabled - for example, "weekdays, 9-6" enables the monitor to run from 9am to 6pm, Monday - Friday
`_onlyStatusChanges`	_onlyStatusChanges	state of the indicated configuration option
`_monitorDescription`	Monitor Description	additional description of monitor that appears on Monitor Detail page (optional)
`_logOnlyThresholdMeas`	_logOnlyThresholdMeas	state of the indicated configuration option
`_description`	Report Description	additional description of monitor that appears on Reports and in monitor popup info (optional)
`_logOnlyMonitorData`	_logOnlyMonitorData	state of the indicated configuration option
`__template`	Monitor Template	monitor template to use for this monitor
`_dependsOn`	Depends On	Choose the monitor that this monitor depends on
`_dependsCondition`	Depends Condition	If OK, this monitor is only enabled if the Depends On monitor is OK.

Monitor Type: Windows Event Log


name	label	description
`eventType`	eventType	value of the indicated measurement
`messages`	messages	value of the indicated measurement
`logCleared`	logCleared	value of the indicated measurement
`eventMessage`	eventMessage	value of the indicated measurement
`intervalEvents`	intervalEvents	value of the indicated measurement
`nextRecord`	nextRecord	value of the indicated measurement
`eventSource`	eventSource	value of the indicated measurement
`eventMachine`	eventMachine	value of the indicated measurement
`eventID`	eventID	value of the indicated measurement
`eventTime`	eventTime	value of the indicated measurement
`eventCategory`	eventCategory	value of the indicated measurement
`matchCount`	match count	most recent match count reported
`recordCount`	records examined	most recent records examined reported
`intervalMatchCount`	matches in interval	most recent matches in interval reported
`value`	value	value of the indicated counter
`value2`	value2	value of the indicated counter
`value3`	value3	value of the indicated counter
`value4`	value4	value of the indicated counter
`_logName`	Log Name	the event log to monitor
`remoteMachineName`	Remote Server	use this field instead of `_machine`, if you need the name of the remote machine to appear in the template
`_eventType`	Event Type	the event types to match
`_alerting`	Run Alerts	How alerts for this monitor are triggered by the following options: (1) For 'for each event matched and report status' the monitor triggers alerts for every matching event found based on the Error If and Warning If thresholds defined for the monitor. (2) For 'once, after all events have been checked', the events received since the last monitor run are checked and alerts are triggered based on the Error If and Warning If thresholds defined for the monitor.
`_frequency`	Update every	amount of time between checks of a monitor
`_name`	Title	title that should appear in the Monitor table (optional)
`_disabled`	Disable	temporarily disable monitor sampling and alerting
`_eventKey`	Source and ID Match	optional match for event Source:ID - leaving this blanks matches events with any source or ID. For example, entering "Print" matches the Print source, and entering "Print:10" matches the Print source with event ID 10
`_notMatchEventKey`	Source and ID NOT Match	ignore events that match Source:ID - leaving this blank matches events with any source or ID. For example, entering "Print" will ignore the Print source events, and entering "Print:10" ignore Print source with event ID 10
`_positiveMatch`	Description Match	optional text or regular expression to match only those events with descriptions that include this text
`_negativeMatch`	Description Not Match	optional text or regular expression to match only those events with descriptions that do not include this text
`_eventCategory`	Event Category	optional event category - leaving this blanks matches events with any category
`_eventMachine`	Event Machine	optional event machine - leaving this blanks matches events from any machine
`_interval`	Interval	optional interval (in minutes) keep the "matches in interval" count over - this is only used if "Run Alerts" above is set to "once".
`_verifyError`	Verify Error	if the monitor detects an error, immediately perform the check again to verify the error.
`_errorFrequency`	Update every (on errors)	the amount of time between checks whenever the status of the monitor is not ok; the Update value from above is used if this is left blank
`_notLogToTopaz`	Stop Logging To Mercury Application Management	Check this box to not log the data for this monitor to Mercury Application Management
`_schedule`	Schedule	schedule for the monitor to be enabled - for example, "weekdays, 9-6" enables the monitor to run from 9am to 6pm, Monday - Friday
`_onlyStatusChanges`	_onlyStatusChanges	state of the indicated configuration option
`_monitorDescription`	Monitor Description	additional description of monitor that appears on Monitor Detail page (optional)
`_logOnlyThresholdMeas`	_logOnlyThresholdMeas	state of the indicated configuration option
`_description`	Report Description	additional description of monitor that appears on Reports and in monitor popup info (optional)
`_logOnlyMonitorData`	_logOnlyMonitorData	state of the indicated configuration option
`__template`	Monitor Template	monitor template to use for this monitor
`_dependsOn`	Depends On	Choose the monitor that this monitor depends on
`_dependsCondition`	Depends Condition	If OK, this monitor is only enabled if the Depends On monitor is OK.

Monitor Type: Oracle9i Application Server


name	label	description
`status`	status	most recent status of the monitor
`value0`	Counter 1 Value	value of the indicated counter
`value1`	Counter 2 Value	value of the indicated counter
`value2`	Counter 3 Value	value of the indicated counter
`value3`	Counter 4 Value	value of the indicated counter
`value4`	Counter 5 Value	value of the indicated counter
`value5`	Counter 6 Value	value of the indicated counter
`value6`	Counter 7 Value	value of the indicated counter
`value7`	Counter 8 Value	value of the indicated counter
`value8`	Counter 9 Value	value of the indicated counter
`value9`	Counter 10 Value	value of the indicated counter
`_apacheCounters`	Counters	the current selection of counterschoose counters
`_url`	URL	the server administration URL (example: http://server:port/webcacheadmin? SCREEN_ID=CGA.Site.Stats& ACTION=Show)
`_frequency`	Update every	amount of time between checks of a monitor
`_name`	Title	title that should appear in the Monitor table (optional)
`_disabled`	Disable	temporarily disable monitor sampling and alerting
`_timeout`	Timeout	the time out, in seconds, to wait for the response
`_proxy`	HTTP Proxy	optional proxy server to use including port (example: proxy.sitescope.com:8080)
`_username`	Authorization User Name	optional user name if the URL requires authorization
`_password`	Authorization Password	optional password if the URL requires authorization
`_challengeResponse`	NT Challenge Response	when selected, use NT Challenge Response authorization
`_proxyusername`	Proxy Server User Name	optional user name if the proxy server requires authorization
`_proxypassword`	Proxy Server Password	optional password if the proxy server requires authorization
`_verifyError`	Verify Error	if the monitor detects an error, immediately perform the check again to verify the error.
`_errorFrequency`	Update every (on errors)	the amount of time between checks whenever the status of the monitor is not ok; the Update value from above is used if this is left blank
`_notLogToTopaz`	Stop Logging To Mercury Application Management	Check this box to not log the data for this monitor to Mercury Application Management
`_schedule`	Schedule	schedule for the monitor to be enabled - for example, "weekdays, 9-6" enables the monitor to run from 9am to 6pm, Monday - Friday
`_onlyStatusChanges`	_onlyStatusChanges	state of the indicated configuration option
`_monitorDescription`	Monitor Description	additional description of monitor that appears on Monitor Detail page (optional)
`_logOnlyThresholdMeas`	_logOnlyThresholdMeas	state of the indicated configuration option
`_description`	Report Description	additional description of monitor that appears on Reports and in monitor popup info (optional)
`_logOnlyMonitorData`	_logOnlyMonitorData	state of the indicated configuration option
`__template`	Monitor Template	monitor template to use for this monitor
`_dependsOn`	Depends On	Choose the monitor that this monitor depends on
`_dependsCondition`	Depends Condition	If OK, this monitor is only enabled if the Depends On monitor is OK.

Monitor Type: Oracle Database


name	label	description
`browsableValue1`	browsableValue1	value of the indicated measurement
`browsableValue2`	browsableValue2	value of the indicated browsable counter
`browsableValue3`	browsableValue3	value of the indicated browsable counter
`browsableValue4`	browsableValue4	value of the indicated browsable counter
`browsableValue5`	browsableValue5	value of the indicated browsable counter
`browsableValue6`	browsableValue6	value of the indicated browsable counter
`browsableValue7`	browsableValue7	value of the indicated browsable counter
`browsableValue8`	browsableValue8	value of the indicated browsable counter
`browsableValue9`	browsableValue9	value of the indicated browsable counter
`browsableValue10`	browsableValue10	value of the indicated browsable counter
`browsableValue11`	browsableValue11	value of the indicated browsable counter
`browsableValue12`	browsableValue12	value of the indicated browsable counter
`browsableValue13`	browsableValue13	value of the indicated browsable counter
`browsableValue14`	browsableValue14	value of the indicated browsable counter
`browsableValue15`	browsableValue15	value of the indicated browsable counter
`browsableValue16`	browsableValue16	value of the indicated browsable counter
`browsableValue17`	browsableValue17	value of the indicated browsable counter
`browsableValue18`	browsableValue18	value of the indicated browsable counter
`browsableValue19`	browsableValue19	value of the indicated browsable counter
`browsableValue20`	browsableValue20	value of the indicated browsable counter
`browsableValue21`	browsableValue21	value of the indicated browsable counter
`browsableValue22`	browsableValue22	value of the indicated browsable counter
`browsableValue23`	browsableValue23	value of the indicated browsable counter
`browsableValue24`	browsableValue24	value of the indicated browsable counter
`browsableValue25`	browsableValue25	value of the indicated browsable counter
`browsableValue26`	browsableValue26	value of the indicated browsable counter
`browsableValue27`	browsableValue27	value of the indicated browsable counter
`browsableValue28`	browsableValue28	value of the indicated browsable counter
`browsableValue29`	browsableValue29	value of the indicated browsable counter
`browsableValue30`	browsableValue30	value of the indicated browsable counter
`_server`	Database Connection URL	Enter the URL to the database connection (for example: jdbc:oracle:thin:@206.168.191.19:1521:ORCL )
`_user`	Database User Name	optional, user name used to connect to the database
`_password`	Database Password	optional, password used to connect to the database
`_browseName1`	_browseName1	ID number assigned to the indicated browsable counter number
`_browseNameid1`	_browseNameid1	ID number assigned to the indicated browsable counter number
`_driver`	Database Driver	driver used to connect to the database
`_browseName2`	_browseName2	ID number assigned to the indicated browsable counter number
`_browseNameid2`	_browseNameid2	ID number assigned to the indicated browsable counter number
`_browseName3`	_browseName3	ID number assigned to the indicated browsable counter number
`_browseNameid3`	_browseNameid3	ID number assigned to the indicated browsable counter number
`_connectTimeout`	Connection Timeout	the time out, in seconds, to wait for a database connection
`_browseName4`	_browseName4	ID number assigned to the indicated browsable counter number
`_queryTimeout`	Query Timeout	the time out, in seconds, to wait for a database query
`_browseNameid4`	_browseNameid4	ID number assigned to the indicated browsable counter number
`_browseName5`	_browseName5	ID number assigned to the indicated browsable counter number
`_browseNameid5`	_browseNameid5	ID number assigned to the indicated browsable counter number
`_browseNameid6`	_browseNameid6	ID number assigned to the indicated browsable counter number
`_browseName6`	_browseName6	ID number assigned to the indicated browsable counter number
`_browseName7`	_browseName7	ID number assigned to the indicated browsable counter number
`_browseNameid7`	_browseNameid7	ID number assigned to the indicated browsable counter number
`_browseName8`	_browseName8	ID number assigned to the indicated browsable counter number
`_browseNameid8`	_browseNameid8	ID number assigned to the indicated browsable counter number
`_browseNameid9`	_browseNameid9	ID number assigned to the indicated browsable counter number
`_browseName9`	_browseName9	ID number assigned to the indicated browsable counter number
`_browseNameid10`	_browseNameid10	ID number assigned to the indicated browsable counter number
`_browseName10`	_browseName10	ID number assigned to the indicated browsable counter number
`_browseName11`	_browseName11	ID number assigned to the indicated browsable counter number
`_browseNameid11`	_browseNameid11	ID number assigned to the indicated browsable counter number
`_browseNameid12`	_browseNameid12	ID number assigned to the indicated browsable counter number
`_browseName12`	_browseName12	ID number assigned to the indicated browsable counter number
`_browseName13`	_browseName13	ID number assigned to the indicated browsable counter number
`_browseNameid13`	_browseNameid13	ID number assigned to the indicated browsable counter number
`_browseName14`	_browseName14	ID number assigned to the indicated browsable counter number
`_browseNameid14`	_browseNameid14	ID number assigned to the indicated browsable counter number
`_browseName15`	_browseName15	ID number assigned to the indicated browsable counter number
`_browseNameid15`	_browseNameid15	ID number assigned to the indicated browsable counter number
`_browseName16`	_browseName16	ID number assigned to the indicated browsable counter number
`_browseNameid16`	_browseNameid16	ID number assigned to the indicated browsable counter number
`_browseName17`	_browseName17	ID number assigned to the indicated browsable counter number
`_browseNameid17`	_browseNameid17	ID number assigned to the indicated browsable counter number
`_browseName18`	_browseName18	ID number assigned to the indicated browsable counter number
`_browseNameid18`	_browseNameid18	ID number assigned to the indicated browsable counter number
`_browseName19`	_browseName19	ID number assigned to the indicated browsable counter number
`_browseNameid19`	_browseNameid19	ID number assigned to the indicated browsable counter number
`_browseNameid20`	_browseNameid20	ID number assigned to the indicated browsable counter number
`_browseName20`	_browseName20	ID number assigned to the indicated browsable counter number
`_browseNameid21`	_browseNameid21	ID number assigned to the indicated browsable counter number
`_browseName21`	_browseName21	ID number assigned to the indicated browsable counter number
`_browseNameid22`	_browseNameid22	ID number assigned to the indicated browsable counter number
`_browseName22`	_browseName22	ID number assigned to the indicated browsable counter number
`_browseName23`	_browseName23	ID number assigned to the indicated browsable counter number
`_browseNameid23`	_browseNameid23	ID number assigned to the indicated browsable counter number
`_browseName24`	_browseName24	ID number assigned to the indicated browsable counter number
`_browseNameid24`	_browseNameid24	ID number assigned to the indicated browsable counter number
`_browseName25`	_browseName25	ID number assigned to the indicated browsable counter number
`_browseNameid25`	_browseNameid25	ID number assigned to the indicated browsable counter number
`_browseName26`	_browseName26	ID number assigned to the indicated browsable counter number
`_browseNameid26`	_browseNameid26	ID number assigned to the indicated browsable counter number
`_browseName27`	_browseName27	ID number assigned to the indicated browsable counter number
`_browseNameid27`	_browseNameid27	ID number assigned to the indicated browsable counter number
`_browseName28`	_browseName28	ID number assigned to the indicated browsable counter number
`_browseNameid28`	_browseNameid28	ID number assigned to the indicated browsable counter number
`_browseName29`	_browseName29	ID number assigned to the indicated browsable counter number
`_browseNameid29`	_browseNameid29	ID number assigned to the indicated browsable counter number
`_browseName30`	_browseName30	ID number assigned to the indicated browsable counter number
`_browseNameid30`	_browseNameid30	ID number assigned to the indicated browsable counter number
`_browse`	Counters	Current selection of counters.
`_frequency`	Update every	amount of time between checks of a monitor
`_name`	Title	title that should appear in the Monitor table (optional)
`_disabled`	Disable	temporarily disable monitor sampling and alerting
`_targetMachineName`	DB Machine Name	Identifier for target DB server, used for reporting to Mercury Application Management (optional)
`_verifyError`	Verify Error	if the monitor detects an error, immediately perform the check again to verify the error.
`_errorFrequency`	Update every (on errors)	the amount of time between checks whenever the status of the monitor is not ok; the Update value from above is used if this is left blank
`_notLogToTopaz`	Stop Logging To Mercury Application Management	Check this box to not log the data for this monitor to Mercury Application Management
`_schedule`	Schedule	schedule for the monitor to be enabled - for example, "weekdays, 9-6" enables the monitor to run from 9am to 6pm, Monday - Friday
`_onlyStatusChanges`	_onlyStatusChanges	state of the indicated configuration option
`_monitorDescription`	Monitor Description	additional description of monitor that appears on Monitor Detail page (optional)
`_logOnlyThresholdMeas`	_logOnlyThresholdMeas	state of the indicated configuration option
`_description`	Report Description	additional description of monitor that appears on Reports and in monitor popup info (optional)
`_logOnlyMonitorData`	_logOnlyMonitorData	state of the indicated configuration option
`__template`	Monitor Template	monitor template to use for this monitor
`_dependsOn`	Depends On	Choose the monitor that this monitor depends on
`_dependsCondition`	Depends Condition	If OK, this monitor is only enabled if the Depends On monitor is OK.

Monitor Type: Windows Resources


name	label	description
`previousCounters`	previousCounters	value of the indicated measurement
`_pdhMachine`	Server	the server to monitor
`_perfmonMsmtsProp`	_perfmonMsmtsProp	no description
`_perfmonProp`	_perfmonProp	no description
`_frequency`	Update every	amount of time between checks of a monitor
`_name`	Title	title that should appear in the Monitor table (optional)
`_disabled`	Disable	temporarily disable monitor sampling and alerting
`_verifyError`	Verify Error	if the monitor detects an error, immediately perform the check again to verify the error.
`_errorFrequency`	Update every (on errors)	the amount of time between checks whenever the status of the monitor is not ok; the Update value from above is used if this is left blank
`_notLogToTopaz`	Stop Logging To Mercury Application Management	Check this box to not log the data for this monitor to Mercury Application Management
`_schedule`	Schedule	schedule for the monitor to be enabled - for example, "weekdays, 9-6" enables the monitor to run from 9am to 6pm, Monday - Friday
`_onlyStatusChanges`	_onlyStatusChanges	state of the indicated configuration option
`_monitorDescription`	Monitor Description	additional description of monitor that appears on Monitor Detail page (optional)
`_logOnlyThresholdMeas`	_logOnlyThresholdMeas	state of the indicated configuration option
`_description`	Report Description	additional description of monitor that appears on Reports and in monitor popup info (optional)
`_logOnlyMonitorData`	_logOnlyMonitorData	state of the indicated configuration option
`__template`	Monitor Template	monitor template to use for this monitor
`_dependsOn`	Depends On	Choose the monitor that this monitor depends on
`_dependsCondition`	Depends Condition	If OK, this monitor is only enabled if the Depends On monitor is OK.

Monitor Type: Ping


name	label	description
`percentFailed`	% packets failed	value of the indicated measurement
`packetsSent`	packets sent	value of the indicated measurement
`status`	status	most recent status of the monitor
`packetsReceived`	packets received	value of the indicated measurement
`roundTripTime`	round trip time	most recent round trip time reported
`_hostname`	Host Name	the IP address or host name that will be pinged (examples: 206.168.191.21 or demo.sitescope.com)
`_frequency`	Update every	amount of time between checks of a monitor
`_name`	Title	title that should appear in the Monitor table (optional)
`_disabled`	Disable	temporarily disable monitor sampling and alerting
`_timeout`	Timeout	the time out per packet, in milliseconds, to wait for ping replies
`_packetSize`	Size	the size, in bytes, of the ping message
`_verifyError`	Verify Error	if the monitor detects an error, immediately perform the check again to verify the error.
`_errorFrequency`	Update every (on errors)	the amount of time between checks whenever the status of the monitor is not ok; the Update value from above is used if this is left blank
`_notLogToTopaz`	Stop Logging To Mercury Application Management	Check this box to not log the data for this monitor to Mercury Application Management
`_schedule`	Schedule	schedule for the monitor to be enabled - for example, "weekdays, 9-6" enables the monitor to run from 9am to 6pm, Monday - Friday
`_onlyStatusChanges`	_onlyStatusChanges	state of the indicated configuration option
`_monitorDescription`	Monitor Description	additional description of monitor that appears on Monitor Detail page (optional)
`_logOnlyThresholdMeas`	_logOnlyThresholdMeas	state of the indicated configuration option
`_description`	Report Description	additional description of monitor that appears on Reports and in monitor popup info (optional)
`_logOnlyMonitorData`	_logOnlyMonitorData	state of the indicated configuration option
`__template`	Monitor Template	monitor template to use for this monitor
`_dependsOn`	Depends On	Choose the monitor that this monitor depends on
`_dependsCondition`	Depends Condition	If OK, this monitor is only enabled if the Depends On monitor is OK.

Monitor Type: Port


name	label	description
`status`	status	most recent status of the monitor
`value`	port response	value of the indicated measurement
`statusText`	statusText	most recent status of the monitor
`roundTripTime`	round trip time	most recent round trip time reported
`_hostname`	Host Name	the IP address or host name that will be connected to (examples: 206.168.191.21 or demo.sitescope.com)
`_port`	Port Number	the port that will be connected to. Either choose one of the commonly used ports from the menu, or enter a port number.
`_frequency`	Update every	amount of time between checks of a monitor
`_name`	Title	title that should appear in the Monitor table (optional)
`_disabled`	Disable	temporarily disable monitor sampling and alerting
`_sendString`	Send String	Override the default string that is be sent to the port after connecting
`_matchString`	Match String	Override the default string that is matched against the port's response
`_timeout`	Timeout	the time out, seconds, to wait for connection and reply
`_verifyError`	Verify Error	if the monitor detects an error, immediately perform the check again to verify the error.
`_errorFrequency`	Update every (on errors)	the amount of time between checks whenever the status of the monitor is not ok; the Update value from above is used if this is left blank
`_notLogToTopaz`	Stop Logging To Mercury Application Management	Check this box to not log the data for this monitor to Mercury Application Management
`_schedule`	Schedule	schedule for the monitor to be enabled - for example, "weekdays, 9-6" enables the monitor to run from 9am to 6pm, Monday - Friday
`_onlyStatusChanges`	_onlyStatusChanges	state of the indicated configuration option
`_monitorDescription`	Monitor Description	additional description of monitor that appears on Monitor Detail page (optional)
`_logOnlyThresholdMeas`	_logOnlyThresholdMeas	state of the indicated configuration option
`_description`	Report Description	additional description of monitor that appears on Reports and in monitor popup info (optional)
`_logOnlyMonitorData`	_logOnlyMonitorData	state of the indicated configuration option
`__template`	Monitor Template	monitor template to use for this monitor
`_dependsOn`	Depends On	Choose the monitor that this monitor depends on
`_dependsCondition`	Depends Condition	If OK, this monitor is only enabled if the Depends On monitor is OK.

Monitor Type: Radius


name	label	description
`status`	status	most recent status of the monitor
`matchValue`	match value	value of the indicated measurement
`roundTripTime`	round trip time	most recent round trip time reported
`_server`	RADIUS Server	the IP address or host name of the RADIUS server (examples: 206.168.191.21 or radius.sitescope.com)
`_serverPassword`	Secret	the secret phrase used to encrypt all requests to this server
`_username`	User Name	the user name to authenticate
`_password`	Password	the password to authenticate
`_frequency`	Update every	amount of time between checks of a monitor
`_name`	Title	title that should appear in the Monitor table (optional)
`_disabled`	Disable	temporarily disable monitor sampling and alerting
`_timeout`	Timeout	the time out, seconds, to wait for a response
`_port`	Port	the TCP port number of Radius server
`_content`	Match Content	optional text to match against content of the file
`_verifyError`	Verify Error	if the monitor detects an error, immediately perform the check again to verify the error.
`_errorFrequency`	Update every (on errors)	the amount of time between checks whenever the status of the monitor is not ok; the Update value from above is used if this is left blank
`_schedule`	Schedule	schedule for the monitor to be enabled - for example, "weekdays, 9-6" enables the monitor to run from 9am to 6pm, Monday - Friday
`_notLogToTopaz`	Stop Logging To Mercury Application Management	Check this box to not log the data for this monitor to Mercury Application Management
`_onlyStatusChanges`	_onlyStatusChanges	state of the indicated configuration option
`_monitorDescription`	Monitor Description	additional description of monitor that appears on Monitor Detail page (optional)
`_logOnlyThresholdMeas`	_logOnlyThresholdMeas	state of the indicated configuration option
`_description`	Report Description	additional description of monitor that appears on Reports and in monitor popup info (optional)
`__template`	Monitor Template	monitor template to use for this monitor
`_logOnlyMonitorData`	_logOnlyMonitorData	state of the indicated configuration option
`_dependsOn`	Depends On	Choose the monitor that this monitor depends on
`_dependsCondition`	Depends Condition	If OK, this monitor is only enabled if the Depends On monitor is OK.

Monitor Type: Real Media Player


name	label	description
`status`	status	most recent status of the monitor
`value0`	Counter 1 Value	value of the indicated counter
`value1`	Counter 2 Value	value of the indicated counter
`value2`	Counter 3 Value	value of the indicated counter
`value3`	Counter 4 Value	value of the indicated counter
`value4`	Counter 5 Value	value of the indicated counter
`value5`	Counter 6 Value	value of the indicated counter
`value6`	Counter 7 Value	value of the indicated counter
`value7`	Counter 8 Value	value of the indicated counter
`value8`	Counter 9 Value	value of the indicated counter
`value9`	Counter 10 Value	value of the indicated counter
`value10`	Counter 11 Value	value of the indicated counter
`value11`	Counter 12 Value	value of the indicated counter
`value12`	Counter 13 Value	value of the indicated counter
`value13`	Counter 14 Value	value of the indicated counter
`value14`	Counter 15 Value	value of the indicated counter
`value15`	Counter 16 Value	value of the indicated counter
`value16`	Counter 17 Value	value of the indicated counter
`value17`	Counter 18 Value	value of the indicated counter
`value18`	Counter 19 Value	value of the indicated counter
`value19`	Counter 20 Value	value of the indicated counter
`_counters`	Counters	the current selection of counterschoose counters
`_mediaURL`	URL	the URL of the object to monitor.
`_duration`	Duration	Playback duration (milleseconds).
`_frequency`	Update every	amount of time between checks of a monitor
`_name`	Title	title that should appear in the Monitor table (optional)
`_disabled`	Disable	temporarily disable monitor sampling and alerting
`_verifyError`	Verify Error	if the monitor detects an error, immediately perform the check again to verify the error.
`_errorFrequency`	Update every (on errors)	the amount of time between checks whenever the status of the monitor is not ok; the Update value from above is used if this is left blank
`_notLogToTopaz`	Stop Logging To Mercury Application Management	Check this box to not log the data for this monitor to Mercury Application Management
`_schedule`	Schedule	schedule for the monitor to be enabled - for example, "weekdays, 9-6" enables the monitor to run from 9am to 6pm, Monday - Friday
`_onlyStatusChanges`	_onlyStatusChanges	state of the indicated configuration option
`_monitorDescription`	Monitor Description	additional description of monitor that appears on Monitor Detail page (optional)
`_logOnlyThresholdMeas`	_logOnlyThresholdMeas	state of the indicated configuration option
`_description`	Report Description	additional description of monitor that appears on Reports and in monitor popup info (optional)
`_logOnlyMonitorData`	_logOnlyMonitorData	state of the indicated configuration option
`__template`	Monitor Template	monitor template to use for this monitor
`_dependsOn`	Depends On	Choose the monitor that this monitor depends on
`_dependsCondition`	Depends Condition	If OK, this monitor is only enabled if the Depends On monitor is OK.

Monitor Type: Real Media Server


name	label	description
`value0`	Counter 1 Value	value of the indicated counter
`value1`	Counter 2 Value	value of the indicated counter
`value2`	Counter 3 Value	value of the indicated counter
`value3`	Counter 4 Value	value of the indicated counter
`value4`	Counter 5 Value	value of the indicated counter
`value5`	Counter 6 Value	value of the indicated counter
`value6`	Counter 7 Value	value of the indicated counter
`value7`	Counter 8 Value	value of the indicated counter
`value8`	Counter 9 Value	value of the indicated counter
`value9`	Counter 10 Value	value of the indicated counter
`value10`	Counter 11 Value	value of the indicated counter
`value11`	Counter 12 Value	value of the indicated counter
`value12`	Counter 13 Value	value of the indicated counter
`value13`	Counter 14 Value	value of the indicated counter
`value14`	Counter 15 Value	value of the indicated counter
`value15`	Counter 16 Value	value of the indicated counter
`value16`	Counter 17 Value	value of the indicated counter
`value17`	Counter 18 Value	value of the indicated counter
`value18`	Counter 19 Value	value of the indicated counter
`value19`	Counter 20 Value	value of the indicated counter
`_counters`	Counters	the current selection of counterschoose counters
`remoteMachineName`	Remote Server	use this field instead of `_machine`, if you need the name of the remote machine to appear in the template
`_frequency`	Update every	amount of time between checks of a monitor
`_name`	Title	title that should appear in the Monitor table (optional)
`_disabled`	Disable	temporarily disable monitor sampling and alerting
`_verifyError`	Verify Error	if the monitor detects an error, immediately perform the check again to verify the error.
`_errorFrequency`	Update every (on errors)	the amount of time between checks whenever the status of the monitor is not ok; the Update value from above is used if this is left blank
`_notLogToTopaz`	Stop Logging To Mercury Application Management	Check this box to not log the data for this monitor to Mercury Application Management
`_schedule`	Schedule	schedule for the monitor to be enabled - for example, "weekdays, 9-6" enables the monitor to run from 9am to 6pm, Monday - Friday
`_onlyStatusChanges`	_onlyStatusChanges	state of the indicated configuration option
`_monitorDescription`	Monitor Description	additional description of monitor that appears on Monitor Detail page (optional)
`_description`	Report Description	additional description of monitor that appears on Reports and in monitor popup info (optional)
`_logOnlyThresholdMeas`	_logOnlyThresholdMeas	state of the indicated configuration option
`_logOnlyMonitorData`	_logOnlyMonitorData	state of the indicated configuration option
`__template`	Monitor Template	monitor template to use for this monitor
`_dependsOn`	Depends On	Choose the monitor that this monitor depends on
`_dependsCondition`	Depends Condition	If OK, this monitor is only enabled if the Depends On monitor is OK.

Monitor Type: RTSP


name	label	description
`status`	status	most recent status of the monitor
`downloadBytes`	downloaded bytes	most recent downloaded bytes reported
`downloadTime`	download time	most recent download time reported
`playbackRate`	media time	most recent media time reported
`startLatency`	start latency	most recent start latency reported
`rate`	download rate (bps)	most recent download rate (bps) reported
`playDuration`	download play duration	most recent download play duration reported
`_MediaUrlParameter`	Media Url	The URL of the sreaming media file (.wav, .avi, .mpg etc.) to monitor
`_frequency`	Update every	amount of time between checks of a monitor
`_name`	Title	title that should appear in the Monitor table (optional)
`_disabled`	Disable	temporarily disable monitor sampling and alerting
`_timeout`	Timeout	the time out, seconds, to wait for the stream to complete.
`_stoptime`	Stop Time	Stop download after a number of seconds has elapsed.
`_maxMeasurement`	Maximum for gauge Measurement	optional value to specify as maximum for gauge display in milleseconds based on download time (example: if the downloadtime of the media is 10 seconds and this value is set at 5 seconds (5000ms) than the gauge will show at 50%
`_verifyError`	Verify Error	if the monitor detects an error, immediately perform the check again to verify the error.
`_errorFrequency`	Update every (on errors)	the amount of time between checks whenever the status of the monitor is not ok; the Update value from above is used if this is left blank
`_notLogToTopaz`	Stop Logging To Mercury Application Management	Check this box to not log the data for this monitor to Mercury Application Management
`_schedule`	Schedule	schedule for the monitor to be enabled - for example, "weekdays, 9-6" enables the monitor to run from 9am to 6pm, Monday - Friday
`_onlyStatusChanges`	_onlyStatusChanges	state of the indicated configuration option
`_monitorDescription`	Monitor Description	additional description of monitor that appears on Monitor Detail page (optional)
`_logOnlyThresholdMeas`	_logOnlyThresholdMeas	state of the indicated configuration option
`_description`	Report Description	additional description of monitor that appears on Reports and in monitor popup info (optional)
`_logOnlyMonitorData`	_logOnlyMonitorData	state of the indicated configuration option
`__template`	Monitor Template	monitor template to use for this monitor
`_dependsOn`	Depends On	Choose the monitor that this monitor depends on
`_dependsCondition`	Depends Condition	If OK, this monitor is only enabled if the Depends On monitor is OK.

Monitor Type: SAP


name	label	description
`browsableValue2`	browsableValue2	value of the indicated browsable counter
`browsableValue3`	browsableValue3	value of the indicated browsable counter
`browsableValue4`	browsableValue4	value of the indicated browsable counter
`browsableValue5`	browsableValue5	value of the indicated browsable counter
`browsableValue6`	browsableValue6	value of the indicated browsable counter
`browsableValue7`	browsableValue7	value of the indicated browsable counter
`browsableValue8`	browsableValue8	value of the indicated browsable counter
`browsableValue9`	browsableValue9	value of the indicated browsable counter
`browsableValue10`	browsableValue10	value of the indicated browsable counter
`browsableValue11`	browsableValue11	value of the indicated browsable counter
`browsableValue12`	browsableValue12	value of the indicated browsable counter
`browsableValue13`	browsableValue13	value of the indicated browsable counter
`browsableValue14`	browsableValue14	value of the indicated browsable counter
`browsableValue15`	browsableValue15	value of the indicated browsable counter
`browsableValue16`	browsableValue16	value of the indicated browsable counter
`browsableValue17`	browsableValue17	value of the indicated browsable counter
`browsableValue18`	browsableValue18	value of the indicated browsable counter
`browsableValue19`	browsableValue19	value of the indicated browsable counter
`browsableValue20`	browsableValue20	value of the indicated browsable counter
`browsableValue21`	browsableValue21	value of the indicated browsable counter
`browsableValue22`	browsableValue22	value of the indicated browsable counter
`browsableValue23`	browsableValue23	value of the indicated browsable counter
`browsableValue24`	browsableValue24	value of the indicated browsable counter
`browsableValue25`	browsableValue25	value of the indicated browsable counter
`browsableValue26`	browsableValue26	value of the indicated browsable counter
`browsableValue27`	browsableValue27	value of the indicated browsable counter
`browsableValue28`	browsableValue28	value of the indicated browsable counter
`browsableValue29`	browsableValue29	value of the indicated browsable counter
`browsableValue30`	browsableValue30	value of the indicated browsable counter
`_browseName1`	_browseName1	ID number assigned to the indicated browsable counter number
`_browseNameid1`	_browseNameid1	ID number assigned to the indicated browsable counter number
`_browseName2`	_browseName2	ID number assigned to the indicated browsable counter number
`_browseNameid2`	_browseNameid2	ID number assigned to the indicated browsable counter number
`_browseNameid3`	_browseNameid3	ID number assigned to the indicated browsable counter number
`_browseName3`	_browseName3	ID number assigned to the indicated browsable counter number
`_browseNameid4`	_browseNameid4	ID number assigned to the indicated browsable counter number
`_browseName4`	_browseName4	ID number assigned to the indicated browsable counter number
`_browseName5`	_browseName5	ID number assigned to the indicated browsable counter number
`_browseNameid5`	_browseNameid5	ID number assigned to the indicated browsable counter number
`_browseName6`	_browseName6	ID number assigned to the indicated browsable counter number
`_browseNameid6`	_browseNameid6	ID number assigned to the indicated browsable counter number
`_browseName7`	_browseName7	ID number assigned to the indicated browsable counter number
`_browseNameid7`	_browseNameid7	ID number assigned to the indicated browsable counter number
`_browseName8`	_browseName8	ID number assigned to the indicated browsable counter number
`_browseNameid8`	_browseNameid8	ID number assigned to the indicated browsable counter number
`_browseName9`	_browseName9	ID number assigned to the indicated browsable counter number
`_browseNameid9`	_browseNameid9	ID number assigned to the indicated browsable counter number
`_browseNameid10`	_browseNameid10	ID number assigned to the indicated browsable counter number
`_browseName10`	_browseName10	ID number assigned to the indicated browsable counter number
`_browseName11`	_browseName11	ID number assigned to the indicated browsable counter number
`_browseNameid11`	_browseNameid11	ID number assigned to the indicated browsable counter number
`_browseName12`	_browseName12	ID number assigned to the indicated browsable counter number
`_browseNameid12`	_browseNameid12	ID number assigned to the indicated browsable counter number
`_browseNameid13`	_browseNameid13	ID number assigned to the indicated browsable counter number
`_browseName13`	_browseName13	ID number assigned to the indicated browsable counter number
`_browseNameid14`	_browseNameid14	ID number assigned to the indicated browsable counter number
`_browseName14`	_browseName14	ID number assigned to the indicated browsable counter number
`_browseNameid15`	_browseNameid15	ID number assigned to the indicated browsable counter number
`_browseName15`	_browseName15	ID number assigned to the indicated browsable counter number
`_browseNameid16`	_browseNameid16	ID number assigned to the indicated browsable counter number
`_browseName16`	_browseName16	ID number assigned to the indicated browsable counter number
`_browseNameid17`	_browseNameid17	ID number assigned to the indicated browsable counter number
`_browseName17`	_browseName17	ID number assigned to the indicated browsable counter number
`_browseNameid18`	_browseNameid18	ID number assigned to the indicated browsable counter number
`_browseName18`	_browseName18	ID number assigned to the indicated browsable counter number
`_browseName19`	_browseName19	ID number assigned to the indicated browsable counter number
`_browseNameid19`	_browseNameid19	ID number assigned to the indicated browsable counter number
`_browseNameid20`	_browseNameid20	ID number assigned to the indicated browsable counter number
`_browseName20`	_browseName20	ID number assigned to the indicated browsable counter number
`_browseNameid21`	_browseNameid21	ID number assigned to the indicated browsable counter number
`_browseName21`	_browseName21	ID number assigned to the indicated browsable counter number
`_browseNameid22`	_browseNameid22	ID number assigned to the indicated browsable counter number
`_browseName22`	_browseName22	ID number assigned to the indicated browsable counter number
`_browseNameid23`	_browseNameid23	ID number assigned to the indicated browsable counter number
`_browseName23`	_browseName23	ID number assigned to the indicated browsable counter number
`_browseNameid24`	_browseNameid24	ID number assigned to the indicated browsable counter number
`_browseName24`	_browseName24	ID number assigned to the indicated browsable counter number
`_browseName25`	_browseName25	ID number assigned to the indicated browsable counter number
`_browseNameid25`	_browseNameid25	ID number assigned to the indicated browsable counter number
`_browseName26`	_browseName26	ID number assigned to the indicated browsable counter number
`_browseNameid26`	_browseNameid26	ID number assigned to the indicated browsable counter number
`_browseName27`	_browseName27	ID number assigned to the indicated browsable counter number
`_browseNameid27`	_browseNameid27	ID number assigned to the indicated browsable counter number
`_browseNameid28`	_browseNameid28	ID number assigned to the indicated browsable counter number
`_browseName28`	_browseName28	ID number assigned to the indicated browsable counter number
`_browseName29`	_browseName29	ID number assigned to the indicated browsable counter number
`_browseNameid29`	_browseNameid29	ID number assigned to the indicated browsable counter number
`_browseName30`	_browseName30	ID number assigned to the indicated browsable counter number
`_browseNameid30`	_browseNameid30	ID number assigned to the indicated browsable counter number
`_browse`	Counters	Current selection of counters.
`_frequency`	Update every	amount of time between checks of a monitor
`_server`	Server	SAP server name.
`_name`	Title	title that should appear in the Monitor table (optional)
`_system`	System	Enter the System number for SAP
`_client`	Client	Enter the Client for SAP, leave blank for default
`_username`	Username	Enter the Username for SAP
`_disabled`	Disable	temporarily disable monitor sampling and alerting
`_verifyError`	Verify Error	if the monitor detects an error, immediately perform the check again to verify the error.
`_errorFrequency`	Update every (on errors)	the amount of time between checks whenever the status of the monitor is not ok; the Update value from above is used if this is left blank
`_notLogToTopaz`	Stop Logging To Mercury Application Management	Check this box to not log the data for this monitor to Mercury Application Management
`_schedule`	Schedule	schedule for the monitor to be enabled - for example, "weekdays, 9-6" enables the monitor to run from 9am to 6pm, Monday - Friday
`_onlyStatusChanges`	_onlyStatusChanges	state of the indicated configuration option
`_monitorDescription`	Monitor Description	additional description of monitor that appears on Monitor Detail page (optional)
`_logOnlyThresholdMeas`	_logOnlyThresholdMeas	state of the indicated configuration option
`_description`	Report Description	additional description of monitor that appears on Reports and in monitor popup info (optional)
`_logOnlyMonitorData`	_logOnlyMonitorData	state of the indicated configuration option
`__template`	Monitor Template	monitor template to use for this monitor
`_dependsOn`	Depends On	Choose the monitor that this monitor depends on
`_dependsCondition`	Depends Condition	If OK, this monitor is only enabled if the Depends On monitor is OK.

Monitor Type: SAP Portal


name	label	description
`browsableValue1`	browsableValue1	value of the indicated measurement
`browsableValue2`	browsableValue2	value of the indicated browsable counter
`browsableValue3`	browsableValue3	value of the indicated browsable counter
`browsableValue4`	browsableValue4	value of the indicated browsable counter
`browsableValue5`	browsableValue5	value of the indicated browsable counter
`browsableValue6`	browsableValue6	value of the indicated browsable counter
`browsableValue7`	browsableValue7	value of the indicated browsable counter
`browsableValue8`	browsableValue8	value of the indicated browsable counter
`browsableValue9`	browsableValue9	value of the indicated browsable counter
`browsableValue10`	browsableValue10	value of the indicated browsable counter
`browsableValue11`	browsableValue11	value of the indicated browsable counter
`browsableValue12`	browsableValue12	value of the indicated browsable counter
`browsableValue13`	browsableValue13	value of the indicated browsable counter
`browsableValue14`	browsableValue14	value of the indicated browsable counter
`browsableValue15`	browsableValue15	value of the indicated browsable counter
`browsableValue16`	browsableValue16	value of the indicated browsable counter
`browsableValue17`	browsableValue17	value of the indicated browsable counter
`browsableValue18`	browsableValue18	value of the indicated browsable counter
`browsableValue19`	browsableValue19	value of the indicated browsable counter
`browsableValue20`	browsableValue20	value of the indicated browsable counter
`browsableValue21`	browsableValue21	value of the indicated browsable counter
`browsableValue22`	browsableValue22	value of the indicated browsable counter
`browsableValue23`	browsableValue23	value of the indicated browsable counter
`browsableValue24`	browsableValue24	value of the indicated browsable counter
`browsableValue25`	browsableValue25	value of the indicated browsable counter
`browsableValue26`	browsableValue26	value of the indicated browsable counter
`browsableValue27`	browsableValue27	value of the indicated browsable counter
`browsableValue28`	browsableValue28	value of the indicated browsable counter
`browsableValue29`	browsableValue29	value of the indicated browsable counter
`browsableValue30`	browsableValue30	value of the indicated browsable counter
`_server`	Application URL	URL of the administrator server for the application ex:
`_browseName1`	_browseName1	ID number assigned to the indicated browsable counter number
`_browseNameid1`	_browseNameid1	ID number assigned to the indicated browsable counter number
`_browseName2`	_browseName2	ID number assigned to the indicated browsable counter number
`_browseNameid2`	_browseNameid2	ID number assigned to the indicated browsable counter number
`_username`	Username	The username for the server administrator page
`_browseName3`	_browseName3	ID number assigned to the indicated browsable counter number
`_browseNameid3`	_browseNameid3	ID number assigned to the indicated browsable counter number
`_browseName4`	_browseName4	ID number assigned to the indicated browsable counter number
`_password`	Password	The password for the server adminstrator page
`_browseNameid4`	_browseNameid4	ID number assigned to the indicated browsable counter number
`_browseNameid5`	_browseNameid5	ID number assigned to the indicated browsable counter number
`_browseName5`	_browseName5	ID number assigned to the indicated browsable counter number
`_proxy`	HTTP Proxy	optional proxy server to use including port (example: proxy.sitescope.com:8080)
`_browseName6`	_browseName6	ID number assigned to the indicated browsable counter number
`_browseNameid6`	_browseNameid6	ID number assigned to the indicated browsable counter number
`_proxyusername`	Proxy Server User Name	optional user name if the proxy server requires authorization
`_proxypassword`	Proxy Server Password	optional password if the proxy server requires authorization
`_browseName7`	_browseName7	ID number assigned to the indicated browsable counter number
`_browseNameid7`	_browseNameid7	ID number assigned to the indicated browsable counter number
`_browseName8`	_browseName8	ID number assigned to the indicated browsable counter number
`_browseNameid8`	_browseNameid8	ID number assigned to the indicated browsable counter number
`_browseNameid9`	_browseNameid9	ID number assigned to the indicated browsable counter number
`_browseName9`	_browseName9	ID number assigned to the indicated browsable counter number
`_browseNameid10`	_browseNameid10	ID number assigned to the indicated browsable counter number
`_browseName10`	_browseName10	ID number assigned to the indicated browsable counter number
`_browseName11`	_browseName11	ID number assigned to the indicated browsable counter number
`_browseNameid11`	_browseNameid11	ID number assigned to the indicated browsable counter number
`_browseName12`	_browseName12	ID number assigned to the indicated browsable counter number
`_browseNameid12`	_browseNameid12	ID number assigned to the indicated browsable counter number
`_browseName13`	_browseName13	ID number assigned to the indicated browsable counter number
`_browseNameid13`	_browseNameid13	ID number assigned to the indicated browsable counter number
`_browseName14`	_browseName14	ID number assigned to the indicated browsable counter number
`_browseNameid14`	_browseNameid14	ID number assigned to the indicated browsable counter number
`_browseName15`	_browseName15	ID number assigned to the indicated browsable counter number
`_browseNameid15`	_browseNameid15	ID number assigned to the indicated browsable counter number
`_browseNameid16`	_browseNameid16	ID number assigned to the indicated browsable counter number
`_browseName16`	_browseName16	ID number assigned to the indicated browsable counter number
`_browseNameid17`	_browseNameid17	ID number assigned to the indicated browsable counter number
`_browseName17`	_browseName17	ID number assigned to the indicated browsable counter number
`_browseNameid18`	_browseNameid18	ID number assigned to the indicated browsable counter number
`_browseName18`	_browseName18	ID number assigned to the indicated browsable counter number
`_browseNameid19`	_browseNameid19	ID number assigned to the indicated browsable counter number
`_browseName19`	_browseName19	ID number assigned to the indicated browsable counter number
`_browseName20`	_browseName20	ID number assigned to the indicated browsable counter number
`_browseNameid20`	_browseNameid20	ID number assigned to the indicated browsable counter number
`_browseName21`	_browseName21	ID number assigned to the indicated browsable counter number
`_browseNameid21`	_browseNameid21	ID number assigned to the indicated browsable counter number
`_browseName22`	_browseName22	ID number assigned to the indicated browsable counter number
`_browseNameid22`	_browseNameid22	ID number assigned to the indicated browsable counter number
`_browseNameid23`	_browseNameid23	ID number assigned to the indicated browsable counter number
`_browseName23`	_browseName23	ID number assigned to the indicated browsable counter number
`_browseNameid24`	_browseNameid24	ID number assigned to the indicated browsable counter number
`_browseName24`	_browseName24	ID number assigned to the indicated browsable counter number
`_browseNameid25`	_browseNameid25	ID number assigned to the indicated browsable counter number
`_browseName25`	_browseName25	ID number assigned to the indicated browsable cou